• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.197-210
• /
• 2012

This paper presents the ways that can improve the Software Cost Estimation Guidelines in order to replace those that are expected to be abolished at February, 2012, and solve the problems that are being occurred in the current Software Cost Estimation Guidelines. By using multidimensional modeling of OLAP(On-Line Analytical Processing), this paper does three dimensional modeling that considers the product/service view, process view and skill view. Also, it presents the identification method of cost estimation data through the view of each dimension. Furthermore, it defines the software cost estimation process and adapts them into the bottom up estimation and the top down estimation. Finally, it proposes the access of cost estimation data by the multidimensional analysis of OLAP.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1201-1208
• /
• 2009

A making a decision of construction cost has important meaning and function for both contractor and owner in construction projects. Especially, it should be premised that estimating the construction cost in efficient and rational way in public construction, which is invested by government funds, for efficient execution of the budget and investment as a side of government. The systematic methodology for estimating construction cost approximately of a river facility construction project has not yet been established because of its unique characteristics including its relatively small project size in terms of cost. On this study, It collect and analyze a river facility construction historical cost data for develop an approximate cost estimating model for river applied by typical embankment section method and rate application of the others activity type. And it verify suitability of model through a that result of application of real river facility construction statement at developed model. By this study, it is expected to reasonable and systematic estimating construction cost through application of developed model.

• Quality Improvement in Health Care
• /
• v.14 no.1
• /
• pp.55-59
• /
• 2008

Background : The purpose of inner cannula is to protect the upper air way and permit air to pass freely, in addition, to provide endotracheal suction, artificial respiration and to maintain adequate oxygen saturation. The tube needs to be sterilized for maintenance and cleanness of air way and for prevention of bronchospasm. However, it has been reported that there is no guideline for sterilization and many hospitals conduct their own sterilization methods, for example, once a day(13's general hospital), three times a day(The Catholic University of Korea ST Mary's hospital) or even no cleansing. Consequently, the QI team of our hospital suggested the SOP(standard operating procedure) of sterilization and evaluate cost and time effect in nursing. Method : 1) Benchmarking of 13's neurosurgery department of general hospital in Seoul 2) Investigation of test records of sputum culture from patients with intubation for tracheotomy 3) Check of results of O2 Sat. monitoring to confirm of maintaining opened air way Result : 1) Improvement of process: decrease of excess sterilization of inner cannula (from 3 times a day to once a day) 2) Cost effects: saving over 10 million won per one year 3) Providing better nursing: time effects (30 min a day) permit to conduct more nursing activities Conclusion : It can get Cost and time effects in nursing with improved sterilization method of inner cannula. It needs to do research on improvement of the monthly exchange protocol of outer cannula and provide supporting data for the proper exchange schedule. The result of additional microorganism detection from patients with new process needs to be evaluated further more.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.218-225
• /
• 2021

Purpose and Method: Financial field among the various changes due to the nationalization of fire fighting officials is the main point and to stably settle according to the purpose, improvement of special account for fire fighting officials is suggested by analyzing the facts and related acts. Results: To use the fire fighting project budget entirely in fire fire fighting project by the purpose of the installation of special account for fire fighting officials, dual budgeting standard for labor cost should be revised. In the reserve cost budgeting standard "Within 1/100 of the total budget rule" total budget includes the labor cost, as a result reserve cost budget will keep increase, so reserve cost budget should be fixed by the project budget instead of the total budget. Conclusion: To use the fire fighting budget by the purpose of the installation of special account for fire fighting officials, improvement on budgeting standard is necessary to increase quality of the fire service and stably operate the fire fighting organization.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.3
• /
• pp.180-187
• /
• 2004

A conventional power supply of a microwave oven has a 60Hz transformer and high voltage capacitor(HVC). Though it is very simple and has low cost, it has several problems such as large size, heavy weight and low efficiency To improve these problems, various high frequency inverter type power supply have been investigated and developed in recent years. But these cost is higher than the conventional one due to additional control circuit, fast switching devces. In this paper, a novel pulse power supply for microwave oven using high frequency transformer embedded HVC(High Voltage Capacitor) is proposed for down-sizing, cost reduction and efficient improvement. To verify the effectiveness of the proposed transformer, an equivalent circuit of transformer embedded HVC is derived and it's characteristic is described. And the validity of the proposed pulse power supply embedded HVC-high frequency transformer is shown by simulations and experiments accroding to various operating conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.28-28
• /
• 2000

Low-cost solid-state inertial sensors of three rate Gyroscopes and a triaxial Accelerometer are evaluated in static and dynamic environments. As a interim result, error models of each inertial sensors are generated. Model parameters with respect to temperature are acquired in static environment. These error models are included in an Extended Kalman Filter(EKF) to compensate bias error due to temperature variation. Experimental results in dynamic environment are included to show the validity of the each error model and the performance improvement of a compensated low cost inertial sensors for a navigational application

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.29-35
• /
• 1995

This paper presents the simultaneous optimal design of structure and LQG control systems for the improvement of riding comforts of active vehicle suspension systems. The performance index of riding comforts is extended to include frequency-weighted acceleration in the quadratic cost functional. Janeway human response curve with respect to acceleration is used to verify the usefulness of the presented method. The method is applied to a half model of an active vehicle suspension systems with elastic body moving on randomly profiled road. The values of stiffness of suspensions are used for the structural design variables. The conjugate gradient method is used for optimization. The simulated results of simultaneous optimization with frequency-weighted cost functional are compared with those without frequency- weighted cost functional.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.237-257
• /
• 1999

Food ＆ beverage part of nowadays hotel is steadily going up with the improvement of tourism industry and with the raise of income of the people, but some of the hotel kitchen has unchanged problem of low commercial profit and can't make improvement, so there are many kitchen problems. Especially, for the administrators of the hotels are avoiding from Korean kitchen with their cause that it makes lower profit than the other kitchen style. So, they are avoiding Korean kitchen itself, or showing minimized running. But, Korean kitchen should take off from its ways of being an assistant role or necessary evil as the part of income, by finding ways to make appropriate profit and ways to fulfill the variant desires of guests by running systematized and reasonable menu and Food cost control. This study is to suggest efficient management ways for the raise of profit and satisfaction of the guests by finding ways by analyzing the present situation of the menu and Food cost control of Korean kitchen by understanding these problems.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.177-187
• /
• 1994

In the design of modern computer systems, the speed gap between the CPUs and DRAMs has been a major concern. To relieve this problem at a low cost, several new DRAM architectures have been proposed. This study is aimed at evaluating quantitatively the impact of the new DRAM architectures (synchronous DRAM. dual-RAS synchronous DRAM, and enhanced DRAM) on the memory system performance. We developed a cache and memory simulator and performed various experiments using the traces generated from four benchmark programs. The simulation results show that the new DRAM architectures offer a better performance than a conventional one by 5~30% in a low cost system and their improvement in a high performance system is less than 1%. However, for resonable multiprogramming workoads, additional performance improvement of about 10~28% is expected in a high performance system while 1~3% in a low cost system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.266-270
• /
• 2014

In this paper, the effects of superconducting fault current limiter (SFCL) installed in power distribution system on reliability are evaluated and analyzed. The fault current will be decreased in power distribution system with SFCL because of the increased impedance of SFCL. The decreased fault current will improve the voltage drop of the bus of substation. The voltage drop is an important factor of power distribution system reliability. In this paper, improvement of reliability worth is analyzed when SFCLs are installed at the starting point in power distribution system. First, resistor-type SFCL model is used in PSCAD/EMTDC. Next, typical power distribution system is modeled. Finally, when the SFCLs with impedance 0.5 [${\Omega}$] are installed in feeder, power distribution system reliability is evaluated. Also, the improvement effect of reliability worth including the effect of voltage sag is analyzed using customer interruption cost according to whether or not SFCL is installed.