• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.31-40
• /
• 2014

Papermaking tobacco sheet is an important reclaimed process for cigarette making. Traditionally, the pressure driven membrane was often used to isolate the effective compounds from the tobacco sheet extract. However, this method is difficult to remove small ionic compounds. Besides, membrane fouling is a major problem for effective use of these pressure driven membrane technologies. In this study, the electrodialysis process is used to removal the chloride ions and nitrate ions, thus the smoking quality of papermaking tobacco sheet extract can get improved. Three types of electrolytes ($Na_2SO_4$, NaCl and HCl) are chosen to prevent the generation of precipitation. The results indicate that 0.1mol/L HCl at current density of $30mA/cm^2$ is the optimal condition for the electrodialysis process. The removal rates of the Cland $NO{_3}^-$ in tobacco sheet extract are 97% and 98.4%, respectively. The electrodialysis process cost was estimated to be 0.11$/L. Naturally, electrodialysis is not only technological feasible, environmental-friendly and economical-attractive for tobacco extract treatment.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• 제34C권9호
• /
• pp.43-52
• /
• 1997

Processors using the superscalar rchitecture can achieve high performance by executing multipel instructions in a clock cycle. It is made possible by having multiple functional units and issuing multiple instructions to functional units simultaneously. But instructions can be dependent on one another and these dependencies prevent some instructions form being issued at the same cycle. In this paper, we designed an issue unit of a superscalar RISC microprocessor that can issue four instructions per cycle. The issue unit receives instructions form a prefetch unit, and issues them in order at a rate of as high as four instructions in one cycle for maximum utilization of functional units. By using an instruction buffer, the unit decouples instruction fetch and issue to improve instruction ussue rate. The issue unit is composed of an instruction buffer and an instruction decoder. The instruction buffer aligns and stores instructions from the prefetch unit, and sends the earliest four available isstructions to the instruction decoder. The instruction decoder decodes instructions, and issues them if they are free form data dependencies and necessary functional units and rgister file prots are available. The issue unit is described with behavioral level HDL (lhardware description language). The result of simulation using C programs shows that instruction issue rate is improved as the instruction buffer size increases, and 12-entry instruction buffer is found to be optimum considering performance and hardware cost of the instruction buffer.

• Food Science of Animal Resources
• /
• 제35권3호
• /
• pp.350-359
• /
• 2015

This review focuses on the enhanced functional characteristics of enzymatic hydrolysates of whey proteins (WPHs) in food applications compared to intact whey proteins (WPs). WPs are applied in foods as whey protein concentrates (WPCs), whey protein isolates (WPIs), and WPHs. WPs are byproducts of cheese production, used in a wide range of food applications due to their nutritional validity, functional activities, and cost effectiveness. Enzymatic hydrolysis yields improved functional and nutritional benefits in contrast to heat denaturation or native applications. WPHs improve solubility over a wide range of pH, create viscosity through water binding, and promote cohesion, adhesion, and elasticity. WPHs form stronger but more flexible edible films than WPC or WPI. WPHs enhance emulsification, bind fat, and facilitate whipping, compared to intact WPs. Extensive hydrolyzed WPHs with proper heat applications are the best emulsifiers and addition of polysaccharides improves the emulsification ability of WPHs. Also, WPHs improve the sensorial properties like color, flavor, and texture but impart a bitter taste in case where extensive hydrolysis (degree of hydrolysis greater than 8%). It is important to consider the type of enzyme, hydrolysis conditions, and WPHs production method based on the nature of food application.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.76.1-76.1
• /
• 2013

Atomic Layer Deposition (ALD) has remarkably developed in semiconductor and nano-structure applications since early 1990. Now, the advantages of ALD process are well-known as controlling atomic-level-thickness, manipulating atomic-level-composition control, and depositing impurity-free films uniformly. These unique properties may accelerate ALD related industries and applications in various functional thin film markets. On the other hand, one of big markets, Display industry, just starts to look at the potential to adopt ALD functional films in emerging display applications, such as transparent and flexible displays. Unlike conventional ALD process strategies (good quality films and stable precursors at high deposition processes), recently major display industries have suggested the following requirements: large area equipment, reasonable throughput, low temperature process, and cost-effective functional precursors. In this talk, it will be mentioned some demands of display industries for applying ALD processes and/or functional films, in terms of emerging display technologies. In fact, the AMOLED (active matrix organic light emitting diode) Television markets are just starting at early 2013. There are a few possibilities and needs to be developing for AMOLED, Flexible and transparent Display markets. Moreover, some basic results will be shown to specify ALD display applications, including transparent conduction oxide, oxide semiconductor, passivation and barrier films.

• Korean Journal of Metals and Materials
• /
• 제47권8호
• /
• pp.516-521
• /
• 2009

In this study we report a rapid synthesis of nanoporous organo-functional silica (OFS) with unimodal and bimodal pore structures encompassing pores ranging from meso-to macroscale. The problems of tediousness and high production cost in the conventional syntheses are overcome by co-condensation of an inexpensive inorganic precursor, sodium silicate with an organosilane containing trimethyl groups. The insitu covalent anchoring of the non-polar trimethyl groups to the inner pore walls prohibits irreversible shrinkage of the wet-gel during microwave drying at ambient pressure and thus larger size pores (from ca. 20 to ca. 100 nm) can be retained in the dried silica. The drying process of the silylated wet-gels at an ambient pressure can be greatly accelerated upon microwave exposure instead of drying in an oven or furnace. Using this approach, anoporous and superhydrophobic silicas showing a wide variation in texture and morphology can be readily synthesized in roughly two hours. The effects of various sol-gel parameters solely on the textural properties of the organo-functional silica (OFS) have been investigated and discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권12호
• /
• pp.1113-1119
• /
• 2000

To operate a process plant safely and economically, process monitoring is very important. Process monitoring is the task to identify the state of the system from sensor data. Process monitoring includes data acquisition, regulatory control, data reconciliation, fault detection, etc. This research focuses on the data recon-ciliation using scale-space filtering and fault detection using functional-link associative neural networks. Scale-space filtering is a multi-resolution signal analysis method. Scale-space filtering can extract highest frequency factors(noise) effectively. But scale-space filtering has too large calculation costs and end effect problems. This research reduces the calculation cost of scale-space filtering by applying the minimum limit to the gaussian kernel. And the end-effect that occurs at the end of the signal of the scale-space filtering is overcome by using extrapolation related with the clustering change detection method. Nonlinear principal component analysis methods using neural network have been reviewed and the separately expanded functional-link associative neural network is proposed for chemical process monitoring. The separately expanded functional-link associative neural network has better learning capabilities, generalization abilities and short learning time than the exiting-neural networks. Separately expanded functional-link associative neural network can express a statistical model similar to real process by expanding the input data separately. Combining the proposed methods-modified scale-space filtering and fault detection method using the separately expanded functional-link associative neural network-a process monitoring system is proposed in this research. the usefulness of the proposed method is proven by its application a boiler water supply unit.

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.245-257
• /
• 2017

The separation of nicotine and tobacco-specific N-nitrosamines is a tough problem in tobacco industry. In this study, separation of nicotine from 4-(methylnitrosamino) -1-(3-pyridyl)-1-butanone (NNK) mixtures was investigated using electrodialysis by taking the principle of the protonation status difference between these two components. The results indicated that the solution pH has a dominant impact on the separation process. In a pH range of 5-7, nicotine molecules are existed as mono- and di-protonated ions and can be separated from the uncharged NNK molecules. The acidic electrolyte is conducive to the separation process from the point of flux and energy consumption; while the alkaline electrolyte has negative impact on the separation process. A current density of $10mA/cm^2$ is an appropriate value for the separation process. The lowest energy consumption of the separation process is 0.58 kWh/kg nicotine with the process cost to be estimated at only $0.208 /kg nicotine. Naturally, electrodialysis is a high-efficiency, cost-effective, and environmentally friendly process to separate and purify nicotine from tobacco juice.

• Journal of Fashion Business
• /
• 제15권2호
• /
• pp.107-119
• /
• 2011

The rate of disposable diaper usage has been increased continuously from convenience of disposable diapers and increment of women's entry in workforce. However, a new perspective toward disposable diapers has been come to the fore in various sides like babies' health, environment, and cost. Furthermore, cloth diaper has started to attract more attention. Since parents and grandparents pay more attention to children as birth rate dropped, they tend to purchase expensive goods if the quality or design of the goods is worthy enough. Therefore, this study has the purpose in presenting the basic data for developing functional and pleasant cloth diaper with analyzing the consuming patterns (convergence in nature, health and technology) and cloth diaper characteristics. The research on the actual condition about children cloth diapers and environmental-friendly materials is as follows. Firstly, as a result of analyzing pros and cons about disposable diapers and cloth diapers, the cloth diapers are estimated to have better health, environment, and cost factors than disposable diapers, only excluding convenience. Secondly, as a result of examining patent registered diapers, the disposable diapers have been improved from shape-centered development to well-being material development, and the cloth diapers have mainly developed functional shape-centered. Thirdly, as a result of analyzing children's goods made with environmental-friendly materials, the children's clothes already use organics and natural resources like beans, bamboo trees, ginkgo, and chitosan. Recently, the diaper industry starts to pay attention to environmental-friendly because the skin ailment from environmental pollution has been an issue. To conclude, children's cloth diaper should be appropriate to their body shape and optimized to have convenient form and functional materials. If environmental-friendly materials are used, quality, functionality, various demands from customers and vitalization of goods industry will be all satisfied.

• Journal of The Korean Society of Integrative Medicine
• /
• 제10권1호
• /
• pp.73-79
• /
• 2022

Purpose : Kinesio taping applied to the ankle varies, and if the overall ankle is taped as much as possible, several effects, including balance, can be expected, but clinically the cost reduction for intervention is very important. Therefore, this study attempted to find out the optimal way to the effect and cost of kinesio taping on ankle dynamic balance. Methods : The subject of this study was 24 university students in their 20s (male: 13, female: 11), who received sufficient explanation of the purpose and method of the study. The Cumberland ankle instability tool (CAIT) questionnaire was used for the degree of ankle instability of the study subjects. If the subject's CAIT score was 28 points or more, it was classified as a stable ankle, and if the score was 24 points or less, it was classified as functional ankle instability (FAI). In this study, Biodex Balance System^® measurement equipment was used to calculate the dynamic balance of study participants. The application of kinesio taping was performed by one physical therapist to attach in the same way, and a method of wrapping the ankle joint was applied in the eight-shaped bandage. Results : The results are as follows in before and after taping of the stable ankle and FAI group. There was no significant difference in the overall, anterior-posterior, and medial-lateral stability index. The comparison is as follows between groups for the differences (post-pre value) in before and after the application of kinesio taping. There were no significant differences between groups in all the overall, anterior-posterior, and medial-lateral stability index. Conclusion : In this study, no significant difference in kinesio taping was found in the dynamic balance of stable ankle and FAI (overall, anterior-posterior, and medial-lateral). It is necessary to continue to study ways to find the maximum effect while minimally attaching them to the application method of ankle kinesio taping.

• Nutrition Research and Practice
• /
• 제9권4호
• /
• pp.400-403
• /
• 2015

BACKGROUND/OBJECTIVES: By the year 2050, thirty-eight percent of the Korean population will be over the age of 65. Health care costs for Koreans over age 65 reached 15.4 trillion Korean won in 2011, accounting for a third of the total health care costs for the population. Chronic degenerative diseases, including coronary heart disease (CHD), drive long-term health care costs at an alarming annual rate. In the elderly population, loss of independence is one of the main reasons for this increase in health care costs. Korean heath policies place a high priority on the prevention of CHD because it is a major cause of morbidity and mortality. SUBJECTS/METHODS: This evidence-based study aims to the estimate potential health care cost savings resulting from the daily intake of omega-3 fatty acid supplementation. Potential cost savings associated with a reduced risk of CHD and the medical costs potentially avoided through risk reduction, including hospitalizations and physician services, were estimated using a Congressional Budget Office cost accounting methodology. RESULTS: The estimate of the seven-year (2005-2011) net savings in medical costs resulting from a reduction in the incidence of CHD among the elderly population through the daily use of omega-3 fatty acids was approximately 210 billion Korean won. Approximately 92,997 hospitalizations due to CHD could be avoided over the seven years. CONCLUSIONS: Our findings suggest that omega-3 supplementation in older individuals may yield substantial cost-savings by reducing the risk of CHD. It should be noted that additional health and cost benefits need to be revisited and re-evaluated as more is known about possible data sources or as new data become available.