• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.19-22
• /
• 2005

Introduction: Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Methods and Materials: Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment, field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Result: We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}\;2\%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}\;1mm$. Conclusion: We can enforce output measurement and appliances check conveniently and time was reduced and was able to raise efficiency of business. We were able to bring n cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.25-32
• /
• 2004

Purpose : The simulator is used to determine patient field and ensure the treatment field, which encompasses the required anatomy during patient normal movement such as during breathing. The latest simulator provide real time display of still, flouroscopic and digitalized image, but conventional simulator is not yet. The purpose of this study is to introduce digital image capture system(DICS) using conventional simulator and clinical case using digital captured still and flouroscopic image. Methods and materials : We connect the video signal cable to the video terminal in the back up of simulator monitor, and connect the video jack to the A/D converter. After connection between the converter jack and computer, We can acquire still image and record flouroscopic image with operating image capture program. The data created with this system can be used in patient treatment, and modified for verification by using image processing software. (j.e. photoshop, paintshop) Result : DICS was able to establish easy and economical procedure. DCIS image was helpful for simulation. DICS imaging was powerful tool in the evaluation of the department specific patient positioning. Conclusion : Because the commercialized simulator based of digital capture is very expensive, it is not easily to establish DICS simulator in the most hospital. DICS using conventional simulator enable to utilize the practical use of image equal to high cost digitalized simulator and to research many clinical cases in case of using other software program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.725-731
• /
• 2020

This study analyzed the impact of increasing orange imports on the domestic fruit markets, focusing on the period January to May when oranges were imported and sold intensively after implementation of the Korea-US FTA. In this study, only citrus fruits that compete with U.S. oranges were limited to domestic fruits; of these, Hallabong, which is consistent with consumption of U.S. oranges, was selected as an analysis target. A dynamic recursive simulation model was established to evaluate the ex-post effects of the Korea-U.S. FTA, and to conduct mid and long-term forecasts for the Hallabong market. In addition, major policy simulations were performed on the Hallabong market to assess the effect of each scenario. The ex-post impact evaluation reveals that between December and February, Hallabong had no effect on the seasonal tariff of oranges. However, from 2012 to 2017, the actual import decreased by 21.9 billion won annually due to the TRQ, with the accumulated 6-year decrease being 131.5 billion won. Major policy simulation analysis shows that the change in the unit cost of import due to the U.S orange crop and the increase of Hallabong export will help in expanding the market, and thus effectively increase income.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.567-584
• /
• 2004

As XML becomes popular as the way of presenting information on the web, how to secure XML data becomes an important issue. So far study on XML security has focused on security of data communications by using digital sign or encryption technology. But, it now requires not just to communicate secure XML data on communication but also to manage query process to access XML data since XML data becomes more complicated and bigger. We can manage XML data queries by access control technique. Right now current XML data access control only deals with read operation. This approach has no option to process update XML queries. In this paper, we present XML access control model and technique that can support both read and update operations. In this paper, we will propose the operation for XML document update. Also, We will define action type as a new concept to manage authorization information and process update queries. It results in both minimizing access control steps and reducing memory cost. In addition, we can filter queries that have no access rights at the XML data, which it can reduce unnecessary tasks for processing unauthorized query. As a result of the performance evaluation, we show our access control model is proved to be better than other access control model in update query. But it has a little overhead to decide action type in select query.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2091-2098
• /
• 2006

In this paper, it proposes a protocol of resource adaptive data dissemination for sensor nodes in a wireless sensor network. In general, each sensor node used in a wireless sensor network delivers the required information to the final destination by conducting cooperative works such as sensing, processing, and communicating each other using the battery power of a independent sensor node. So, a protocol used for transferring the acquired information to users through the wireless sensor network can minimize the power consumption of energy resource given to a sensor node. Especially, it is very important to minimize the total amount of power consumption with a method for handling the problems on implosion. data delivery overlapping, and excessive message transfer caused by message broadcasting. In this paper, for the maintaining of the shortest path between sensor nodes, maximizing of the life time of a sensor node and minimizing of communication cost, it presents a method for selecting the representative transfer node for an event arising area based on the negotiation scheme and maintaining optimal transfer path using hop and energy information. Finally, for the performance evaluation, we compare the proposed protocol to existing directed diffusion and SPIN protocol. And, with the simulation results, we show that the proposed protocol enhances the performance on the power consumption rate when the number of overall sensor nodes in a sensor network or neighbor sensor nodes in an event area are increased and on the number of messages disseminated from a sensor node.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1339-1347
• /
• 2015

This study discusses a remote control torch system equipped with a GMAW double wire reel. The welding machine is 30m away from the wire feeder at the industrial site and the feeder is three to five meters away from the torch. Accordingly, the welders cannot control the current and voltage that meets the welding condition during work when they are working at a place that prevents them from seeing the control panel, such as inside a vehicle or tank or at a far work site. They also have no choice but to stop working to change the wire reel when it is burned out completely. Such work suspension resulting from frequent moves to adjust the current and voltage as well as to replace the wire and subsequent cooling causes welding defects. This study produced a remote control torch equipped with a double wire reel by simplifying and streamlining the existing GMAW functions to reduce the troubling issue. The remote control torch equipped with a double wire reel and the existing $CO_2$ /MAG welding torch were applied as a V-groove butt in the vertical position using 6mm rolled steel for a SM50A welding structure. After welding, the condition of welded surface beads underwent a visual inspection and radiographic inspection to analyze the welding quality inside the welded part. This study also evaluated the reduction of welding defects, cost saving, the replacing performance against the existing commercial welders, and the effects on possible compatibility.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1031-1040
• /
• 2010

Hash join is one of the core algorithms in databases management systems. If a hash join cannot complete in one-pass because the available memory is insufficient (i.e., hash table overflow), however, it may incur a few sequential writes and excessive random reads. With harddisk as the tempoary storage for hash joins, the I/O time would be dominated by slow random reads in its probing phase. Meanwhile, flash memory based SSDs (flash SSDs) are becoming popular, and we will witness in the foreseeable future that flash SSDs replace harddisks in enterprise databases. In contrast to harddisk, flash SSD without any mechanical component has fast latency in random reads, and thus it can boost hash join performance. In this paper, we investigate several important and practical issues when flash SSD is used as tempoary storage for hash join. First, we reveal the va patterns of hash join in detail and explain why flash SSD can outperform harddisk by more than an order of magnitude. Second, we present and analyze the impact of cluster size (i.e., va unit in hash join) on performance. Finally, we emperically demonstrate that, while a commerical query optimizer is error-prone in predicting the execution time with harddisk as temporary storage, it can precisely estimate the execution time with flash SSD. In summary, we show that, when used as temporary storage for hash join, flash SSD will provide more reliable cost estimation as well as fast performance.

• Journal of the Korean Society of School Health
• /
• v.8 no.1
• /
• pp.143-154
• /
• 1995

Korea has been recently reducing the quality of life as well as rising medical cost because of the increase of chronic diseases. But we can prevent those chronic diseases through the improvement of environment or life style. We evaluated the educational effectiveness of chronic diseases(hypertention, diabetes, cancer, stroke and other chronic diseases) designed to increase the knowledge, attitude and practice of chronic diseases among university students. Between August 1994 and November 1994, we implemented chronic diseases prevention instruction in intervention students; unmatched control students were selected in same university. We conducted pre- and post-intervention surveys both intervention and control students with self-reported questionnaires(50 items). We assigned score(0-4 points) to items and conducted a analysis of covariance(ANCOVA) with sex, grade and economic status as the covariate, using the SAS PC computer statistical package. And we culculated odds ratio with safety scores between intervention and control students. The results of this study were followed. 1. In demographic characteristics of subjects both pre- and post intervention, we found no significant differences in intervention and control students at religion, father's education, mother's education, mother's occupation and type of residence(p>0.05), but we found significant differences at sex(p<0.001), grade(p<0.001) and economic status(p<0.05). 2. The sex, grade and economic status-adjusted mean prevention knowledge scores for diabetes and stroke increased from the pre- to post-survey in the intervention students(p<0.001), but control students did not increased(p>0.05). As odds ratios in knowledge were below 1, the knowledge of intervention students were higher than control students. 3. The attitudes for general adult health increased from the pre- to post-survey in the intervention students(p<0.05), but control students did not increased(p>0.05). As odds ratios in attitudes were approximately 1, we can not say effectiveness in intervention students 4. The pratices for cancer and stroke increased from the pre- to post-survey in both the intervention and control students(p<0.001). Also odds ratio of hypertention was 0.91, and that of stroke was 1.14. 5. Health related behaviors did not increased from the pre- to post- survey in both the intervention and control students(p>0.05). But odds ratio of drinking was 0.76 and that of body weight was 1.21. 6. Health status did not increased from the pre- to post- survey in both the intervention and control students(p>0.05). As odds ratio of health status was 1.09, prevention education was not effect in intervention students We would like to recommend as follows; 1. University students must learn about prevention of chronic diseases. Because the knowledge of invetervention students was higher than that of control students. 2. The prevention education of chronic diseases should be taught from primary school. 3. Adult health education for university students must be practiced continuously. Education period(l5 weeks) in this study was not complete. 4. The evaluation of chronic diseases was conducted real measurement(such as BP check) as well as self reported-survey. 5. Educational materials(video tape, pamphlet) related the prevention of chronic diseases should be developed at national level. And we must easely use those materials. 6. The prevention education of chronic diseases should be made through mass media as well as school education.

• Journal of Veterinary Clinics
• /
• v.24 no.3
• /
• pp.325-330
• /
• 2007

This study was to determine whether canine model which produce acute permanent joint instability in short period without postoperative exercise have a degenerative changes and also evaluated its suitability as an appropriate animal OA models. Ten skeletally mature beagle dogs underwent a unilateral surgical transection of the cranial cruciate ligament and, the medial collateral ligament as well as a medial meniscectomy. The contra-lateral joint was used as control. After 12 weeks, After 12 weeks, the amount of joint damage, inflammation and biochemical change of synovial fluid was evaluated. Histological analysis showed chondrocyte clone formation, hypertrophy of the cartilage and moderate loss of proteoglycans in the experimental joints compared to control joints. In addition, the synovial inflammation in the experimental joints was observed. Biochemical analysis of SF showed significantly increased MMP (matrix metalloproteinase) -2 and -9 in experimental joints compared to control joints. This canine OA model shows the characteristics of degenerative joint disease, and may have a advantages of reducing the time and cost because postoperative exercise is not needed in this OA model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.211-218
• /
• 2014

Recently, software-based programmable logic controller (PLC) systems, which are implemented in standard PLC languages on general hardware, are gaining popularity because they overcome the limitations of classical hardware PLC systems. Another noticeable trend is that the use of integrated development environment (IDE) is becoming important. IDEs can help developers to easily manage the growing complexity of modern control systems. Furthermore, industrial Ethernet, e.g. EtherCAT, is becoming widely accepted as a replacement for conventional fieldbuses in the distributed control domain because it offers favorable features such as short transmission delay, high bandwidth, and low cost. In this paper, we implemented the extension of open source IDE, called Beremiz, for developing EtherCAT-based real-time, synchronized motion control applications. We validated the EtherCAT system management features and the real-time responsiveness of the control function by using commercial EtherCAT drives and evaluation boards.