• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.59-66
• /
• 2007

The digital working environment and its related technology have been rapidly expanding. In the surveying field, we have changed from using optical film cameras and plotters to digital cameras, multi sensors like GPS/INS etc,. The old analog work flow is replaced by a new digital work flow. Accurate data of the land is used in various fields, efficient utilization and management of land, urban planning, disaster and environment management. It is important because it is an essential infrastructure. For this study, LiDAR surveying was used to get points clouds in the study area. It has a high vegetation penetrating advantage and we used a digital process from planning to the final products. Contour lines were made from LiDAR data and compared with national digital base maps (scale 1/1,000 and 1/5,000). As a result, the accuracy and the economical efficiency were evaluated. The accuracy of LiDAR contour data was average $0.089m{\pm}0.062\;m$ and showed high ground detail in complex areas. Compared with 1/1,000 scale contour line production when surveying an area over $100\;km^2$, approximately 48% of the cost was reduced. Therefore we prepose LiDAR surveying as an alternative to modify and update national base maps.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.55-67
• /
• 2010

The main purpose of this study is to develop a system and data model extracted from the TO-BE process model of rental apartments to promote information exchange based on knowledge obtained through maintenance status analysis. Currently, it is difficult to find examples suggesting a data model through a process analysis of maintenance in rental apartments. Thus, this study intends to suggest a process as well as a data model to promote the development of a maintenance system for rental apartments by using building management knowledge, utilization of standardized tools, and existing FM (Facility Management) techniques to break through limitations in actual application. Ultimately, this study aims to show examples of document-oriented analysis and information technology for middle managers in charge of the maintenance of rental apartments, as well as work analysts developing the maintenance system. In further research beyond this study, complex issues on the maintenance of rental apartments, legal restrictions on customary practices of maintenance activities, effects of the scales of maintenance practices, requirements to perform maintenance activities, evaluation on the status of maintenance, life cycle cost and risks will be investigated.

• Journal of KIISE:Databases
• /
• v.29 no.3
• /
• pp.180-192
• /
• 2002

We investigate the effect of the data skew of join attributes on the performance of a pipelined multi-way hash join method, and propose two new harsh join methods in the shared-nothing multiprocessor environment. The first proposed method allocates buckets statically by round-robin fashion, and the second one allocates buckets dynamically via a frequency distribution. Using harsh-based joins, multiple joins can be pipelined to that the early results from a join, before the whole join is completed, are sent to the next join processing without staying in disks. Shared nothing multiprocessor architecture is known to be more scalable to support very large databases. However, this hardware structure is very sensitive to the data skew. Unless the pipelining execution of multiple hash joins includes some dynamic load balancing mechanism, the skew effect can severely deteriorate the system performance. In this parer, we derive an execution model of the pipeline segment and a cost model, and develop a simulator for the study. As shown by our simulation with a wide range of parameters, join selectivities and sizes of relations deteriorate the system performance as the degree of data skew is larger. But the proposed method using a large number of buckets and a tuning technique can offer substantial robustness against a wide range of skew conditions.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2005

Embedded systems have a set of tasks to execute. These tasks can be implemented either on application specific hardware or as software running on a specific processor. The design of an embedded system involves the selection of hardware software resources, Partition of tasks into hardware and software, and performance evaluation. An accurate estimation of execution time for extreme cases (best and worst case) is important for hardware/software codesign. A tighter estimation of the execution time bound nay allow the use of a slower processor to execute the code and may help lower the system cost. In this paper, we consider an ARM-based embedded system and developed a tool to estimate the tight boundary of execution time of a task with loop bounds and any additional program path information. The tool we developed is based on an exiting timing analysis tool named 'Cinderella' which currently supports i960 and m68k architectures. We add a module to handle ARM ELF object file, which extracts control flow and debugging information, and a module to handle ARM instruction set so that the new tool can support ARM processor. We validate the tool by comparing the estimated bound of execution time with the run-time execution time measured by ARMulator for a selected bechmark programs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.610-619
• /
• 2016

Digital manufacturing (DM) technology helps engineers design products promptly and reliably at low production cost by simulating a manufacturing process and the material behavior of a product in use, based on three-dimensional digital modeling. The computing infrastructure for digital manufacturing, however, is usually expensive and, at present, the number of professional design engineers who can take advantage of this technology to a product design accurately is insufficient, particularly in small and medium manufacturing companies. Considering this, the Korea Institute of Science and Technology Information (KISTI) and H University is operating a DM track in the form of Industry-University-Research Institute collaboration to train high-performance-computing-based DM professionals. In this paper, a series of courses to train students to work directly into DM practice in industry after graduation is reported. The operating cases of the DM track for two years since 2013 are presented by focusing on the progress in establishment, lecture and practice contents, evaluation of students, and course quality improvement. Overall, the track management, curriculum management, learning achievement of students have been successful. By expediting more active participation of the students in the track and providing more internship and job offers in the participating companies in addition to collaborative capstone design projects, the track can be expanded by fostering a nationwide training network.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.156-163
• /
• 2020

The purpose of this study was to select the wheat varieties, among 8 domestic cultivates, that are suitable, for use as grain feed at paddy fields in the Honam region. The seeds of wheat were sown and harvested in Wanju County. Among the wheat varieties, "Jojoong" was the earliest for its heading date on April 15, and it showed the earliest day for the maturing date on May 24. The heading date of "Baegjong" was the same as that for "Keumkang" on April 18, and the maturing date was one day later than that for "Keumkang" on May 29. But there was no significant difference of heading and maturing dates among the 8 wheat varieties. The lowest number of spikes/㎡ was 513/㎡ of "Goso", and the highest number of spikes/㎡ was 974/㎡ of "Chongwoo". The spikes/㎡ and yield of "Baegjon" was 542kg/10a and it was the highest yielding variety among the 8 wheat varieties. The chemical compositions of DM (dry matter) and CP (crude protein) on rumen digestibility were not significantly different among the 8 wheat varieties. Furthermore, rumen digestibility of DM and CP, and the nutrients value were slightly higher than those of corn. The domestic 8 wheat varieties for grain feed, with their high nutrient qualities, could eventually replace imported grain feed and wheat grain feed. These 8 varieties are cost-effective feed and paddy field fodder for livestock farmers.

• Journal of KIISE
• /
• v.44 no.7
• /
• pp.658-667
• /
• 2017

The demand for large-scale storage systems has continued to grow due to the emergence of multimedia, social-network, and big-data services. In order to improve the response time and reduce the load of such large-scale storage systems, DRAM-based in-memory cache systems are becoming popular. However, the high cost of DRAM severely restricts their capacity. While the method of compressing cache entries has been proposed to deal with the capacity limitation issue, compression and decompression, which are technically difficult to parallelize, induce significant processing overhead and in turn retard the response time. A selective compression scheme is proposed in this paper for in-memory file system caches that rapidly estimates the compression ratio of incoming cache entries with their Shannon entropies and compresses cache entries with low compression ratio. In addition, a description is provided of the design and implementation of an in-kernel in-memory file system cache with the proposed selective compression scheme. The evaluation showed that the proposed scheme reduced the execution time of benchmarks by approximately 18% in comparison to the conventional non-compressing in-memory cache scheme. It also provided a cache hit ratio similar to the all-compressing counterpart and reduced 7.5% of the execution time by reducing the compression overhead. In addition, it was shown that the selective compression scheme can reduce the CPU time used for compression by 28% compared to the case of the all-compressing scheme.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.527-536
• /
• 2017

With the recent development of smart grid industry, the necessity for efficient EMS(Energy Management System) has been increased. In particular, in order to reduce electric load and energy cost, sophisticated electric load forecasting and efficient smart grid operation strategy are required. In this paper, for more accurate electric load forecasting, we extend the data collected at demand time into high time resolution and construct an artificial neural network-based forecasting model appropriate for the high time resolution data. Furthermore, to improve the accuracy of electric load forecasting, time series data of sequence form are transformed into continuous data of two-dimensional space to solve that problem that machine learning methods cannot reflect the periodicity of time series data. In addition, to consider external factors such as temperature and humidity in accordance with the time resolution, we estimate their value at the time resolution using linear interpolation method. Finally, we apply the PCA(Principal Component Analysis) algorithm to the feature vector composed of external factors to remove data which have little correlation with the power data. Finally, we perform the evaluation of our model through 5-fold cross-validation. The results show that forecasting based on higher time resolution improve the accuracy and the best error rate of 3.71% was achieved at the 3-min resolution.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.130-139
• /
• 2016

A frequency of earthquake occurrence in the Republic of Korea is increasing over the past few decades. In this situation, an importance of earthquake prevention comes to the fore because the earthquake does damage to structures and causes severe damage of human life. For the earthquake prevention, a real-time vibration measurement for structures is important. As an example, the United States of America and Japan have already been monitoring real-time earthquake acceleration for the important structures and the measured acceleration data has been managed by forming database. This database could be used for revising the seismic design specifications or predicting the damage caused by earthquake. In Korea, Earthquake Recovery Plans Act and Enforcement Regulations are revised and declared lately. Ministry of Public Safety and Security is constructing a integrated management system for the measured earthquake acceleration data. The purpose of this research is to develop a real-time vibration monitoring and analysis system for structures which links to the integrated management system. The developed system contains not only a monitoring function to show real-time acceleration data but also an analysis system to perform fast fourier transform, to obtain natural frequency and earthquake magnitude, to show response spectrum and power spectrum, and to evaluate structural health. Additionally, this system is designed to be able to link to the integrated management system of Ministry of Public Safety and Security. It is concluded that the developed system can be useful to build a safety management network, minimize maintenance cost of structures, and prevention of the structural damage due to earthquake.