• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.59-86
• /
• 1996

Current methods for evaluating unsignalized intersections, and estimating level-of-service (LOS) is determined from efficiency-based criteria such as little or no delay to very long delays. At present, similar procedures to evaluate intersections using safety-based criteria do not exist. The improvement of sight distances at intersections is the most effective way of improving intersection safety. However, a set of procedures is necessary to account for the limitations in current methodology. Such an approach would build upon such methods, but also account for: deficiencies in the current deterministic solution for the determination of intersection sight distances; opportunity for an accident and severity of an accident; and cost-effectiveness of attaining various levels of sight distances. In this research, a model that estimates the degree of safety at two-way stop-controlled intersections is described. Only crossing maneuvers are considered in this study because accidents caused by the crossing maneuvers are the dominate type among intersection accidents. Monte Carlo methods are used to estimate the hazard at an intersection as a function of roadway features and traffic conditions. Driver`s minimum gap acceptance in the crossing vehicles and headway distribution on the major road are used in the crossing vehicles and headway distribution on the major road are used in the model to simulate the real intersectional maneuvers. Other random variables addressed in the model are: traffic speeds; preception-reaction times of both drivers in the crossing vehicles and drivers in oncoming vehicles on the major road; and vehicles on the major roads. The developed model produces the total number of conflicts per year per vehicle and total potential kinetic energy per year per vehicle dissipated during conflicts as measurements of safety at intersections. Based on the results from the developed simulation model, desirable sight distances for various speeds were determined as 350 feet, 450 feet and 550 feet for 40 mph, 50 mph and 60 mph prevailing speed on the major road, respectively. These values are seven to eight percent less than those values recommended by AASHTO. A safety based level-of-service (LOS) is also developed using the results of the simulation model. When the total number of conflicts per vehicle is less than 0.05 at an intersection, the LOS of the intersection is `A' and when the total number of conflicts per vehicle is larger than 0.25 at an intersection, the LOS is `F'. Similarly, when the total hazard per vehicle is less than 350, 000 1b-ft2/sec2, the LOS is `F'. Once evaluation of the current safety at the intersection is complete, a sensitivity analysis can be done by changing one or more input parameters. This will estimate the benefit in terms of time and budget of hazard reduction based upon improving geometric and traffic characteristics at the intersection. This method will also enable traffic engineers in local governments to generate a priority list of intersection improvement projects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.260-266
• /
• 2009

Non-revenue water reduction(NRW) technologies are implemented to evaluate and manage leakages scientifically in water distribution systems under local governments. A development of quantitative leakage indicator by measuring minimum night flow, pressure control policy by installation of PRV(pressure reducing valve) and the establishment of leakage prevention schemes by residual life modeling of deteriorated water pipes are reviewed and studied. Estimation models of allowable leakage are developed by measuring and analyzing minimum night flow at residential and commercial area in Nonsan city, which is suggested from UK water industry and can improve an existing leakage indicator for the evaluation of non-revenue water. Also, pressure control method is applied and analyzed to Uti distribution area in Sacheon city in the operation aspect. As results, $466\;m^3/day$ of leakage can be reduced and it is expected that 113million won of annual cost can be saved. In the part of corrosion velocity and residual life assessment, non-linear prediction models of residual thickness are proposed by assessment of corrosion velocity based on exposure years, soil and water quality etc., since the deteriorated water pipe play a major role to increase leakage. It is expected that collection data and analyzing results can be applied effectively and positively to reduce non-revenue water by accumulating surveying data and verifying the results in the business field of water distribution systems under local governments.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1273-1273
• /
• 2001

The efficiency of the luminal fermentation process influences overall efficiency of luminal production, animal health and reproduction. Ruminant production systems have a significant impact on the global environment, as well. Animal wastes contribute to pollution of the environment as ammonia volatilized to the air and nitrate leached to ground water. Microbial protein synthesis in the rumen satisfies a large proportion of the protein requirements of animals. Quantifying the microbial synthesis is possible by using markers for lumen bacteria and protozoa such as nucleic acids, purine bases, some specific amino acids, or by isotopic $^{15}N,^{32}P,\;and\;^{35}S$ labelled feeds. All those methods require cannulated animals, they are time-consuming and some methods are very expensive as well. Many attempts have been made to find an alternative method for indirect measurement of microbial synthesis in intact animals. The present investigations aimed to assess possibilities of NIRS for prediction of purine nitrogen excretion and ruminal microbial nitrogen synthesis by NIR spectra of urine. Urine samples were collected from 12 growing sheep,6 of them male, and 6- female. The sheep were included in feeding experiment. The ration consisted of sorghum silage and protein supplements -70:30 on dry matter basis. The protein supplements were chosen to differ in protein degradability. The urine samples were collected daily in a vessel containing $60m{\ell}$ 10% sulphuric acid to reduce pH below 3 and diluted with tap water to 4 liters. Samples were stored in plastic bottles and frozen at $-20^{\circ}C$ until chemical and NIRS analysis. The urine samples were analyzed for purine derivates - allantoin, uric acid, xantine and hypoxantine content. Microbial nitrogen synthesis in the lumen was calculated according to Chen and Gomes, 1995. Transmittance urine spectra with sample thickness 1mm were obtained by NIR System 6500 spectrophotometer in the spectral range 1100-2500nm. The calibration was performed using ISI software and PLS regression, respectively. The following statistical results of NIRS calibration for prediction of purine derivatives and microbial protein synthesis were obtained.(Table Omitted). The result of estimation of purine nitrogen excretion and microbial protein synthesis by NIR spectra of urine showed accuracy, adequate for rapid evaluation of microbial protein synthesis for a large number of animals and different diets. The results indicate that the advantages of the NIRS technology can be extended into animal physiological studies. The fast and low cost NIRS analyses could be used with no significant loss of accuracy when microbial protein synthesis in the lumen and the microbial protein flow in the duodenum are to be assessed by NIRS.

• Journal of the Korean Dietetic Association
• /
• v.16 no.4
• /
• pp.378-396
• /
• 2010

The objectives of this study were to explore hospital foodservice management and to investigate conditions related to health insurance coverage of inpatient meals. A questionnaire was distributed to the nutrition departments of 44 hospitals in Seoul on July 2009. The average kitchen area was 0.5 $m^2$, and centralized distribution systems were in place. Partition walls from contamination zones, separate work tables to prevent cross-contamination, exclusive areas for preparing tube feeding, and split carts with refrigerated and convection heat settings were largely used in tertiary hospitals. Most dietitians did meal rounds (93.2%) and surveyed for patient satisfaction (86.4%). The major theme of QI (Quality Improvement) was menu management (31.8%). The health insurance fees for meals were (won)4,938.9 for a general diet, (won)5,199.8 for a therapeutic diet, (won)4,067.0 for tube feeding, (won)9,950.0 for sterilized diet, and (won)18,383.4 for diets not covered by health insurance. The prices for general and therapeutic diets were significantly lower in hospitals compared to tertiary or general hospitals (P<0.001). The cost composed of 48.3% food, 44.0% labor and 7.7% overhead for general diets and 47.9%, 44.5% and 7.6% for therapeutic diets. In the case of health insurance coverage for patient meals, the number of items applied to general diets averaged 2.8 out of 4 and for therapeutic diets it averaged 1.9 out of 3. To reform the health insurance coverage system for patient meals, it is urgent that the qualified level of patient meals is presented from a national viewpoint, and monitoring should be performed consistently by developing the evaluation tools.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.1 s.17
• /
• pp.99-106
• /
• 2004

Efficiency and efficient management on maintenance/repair/operation (MRO) phase is getting important with advance in technologies and complex functionalities of building and facility, Using software systems as well as advanced hardware systems in MRO area is spreading along with this trend to take advantage of information technology. Information of building and facility for MRO phase is derived from engineering/procurement/construction (EPC) phase. But most current commercial software systems in EPC and MRO are focusing on their own phase, which arise lack of consistency of information from EPC to MRO phase. But, the information system now used at the MRO phase stop flowing the building and the facilities information and then newly create. Moreover, from an asset management point of view, asset particulars such as the structures and equipments are different the value fluctuation. In order to reflect these information rationally, the construction costs are correctly distributed and the initial price of the asset particulars have to be estimated. In this study, develop the information model which can apply the cost information at the EPC phase to the MRO phase.

• Nutrition Research and Practice
• /
• v.11 no.3
• /
• pp.247-256
• /
• 2017

BACKGROUND/OBJECTIVES: Easy access to intervention and support for certain behaviors is important for obesity prevention and management. The available technology such as smartphone applications can be used for intervention regarding healthy food choices for obesity prevention and management in elementary-school students. The transtheoretical model (TTM) is comprised of stages and processes of change and can be adopted to tailored education for behavioral change. This study aims to develop TTM-based nutrition contents for mobile applications intended to change eating behaviors related to weight gain in young children. SUBJECTS/METHODS: A synthesized algorithm for tailored nutrition messages was developed according to the intake status of six food groups (vegetables, fruits, sugar-sweetened beverages, fast food and instant food, snacks, and late-night snacks), decision to make dietary behavioral changes, and self-confidence in dietary behavioral changes. The messages in this study were developed from December 2014 to April 2015. After the validity evaluation of the contents through expert consultation, tailored nutrition information messages and educational contents were developed based on the TTM. RESULTS: Based on the TTM, stages of subjects are determined by their current intake status, decision to make dietary behavioral changes, and self-confidence in dietary behavioral changes. Three versions of tailored nutrition messages at each TTM stage were developed so as to not send the same messages for three weeks at most, and visual materials such as figures and tables were developed to provide additional nutritional information. Finally, 3,276 tailored nutrition messages and 60 nutrition contents for applications were developed. CONCLUSIONS: Smartphone applications may be an innovative medium to deliver interventions for eating behavior changes directly to individuals with favorable cost-effectiveness. In addition, using the TTM for tailored nutrition education for healthy eating is an effective approach.

• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.835-844
• /
• 2002

The number of channels available to a video server is limited since the number of channels a video server can support is determined by its communication bandwidth. Several approaches such as batching, piggybacking and patching have been proposed to reduce I/O demand on the video server by sharing multicast data. Patching has been shown to be efficient in the matter of the cost for VOD systems. Unlike conventional multicast techniques, patching is a dynamic multicast scheme which enables a new request to join an ongoing multicast. In addition, true VOD can be achieved since a new request can be served immediately without having to wait for the next multicast. In this paper. we propose two types of channel reservation patching algorithm : a fixed channel reservation patching and a variable channel reservation patching. To immediately schedule the requests for popular videos, these algorithms reserve the channels of video server for the fixed number of popular videos or for the variable number of popular videos which is determined dynamically according to the load of video server. The performance of the proposed algorithms is evaluated through simulations, and compared with that of simple patching. Our performance measures are average defection rate, average latency, service fairness and the amount of buffered data according to video server loads. Simulation results show that the proposed channel reservation patching algorithms provide better performance compared to simple patching algorithm.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.375-386
• /
• 2008

Recently, development paradigm of information system is turning into object oriented and component based, and this methodology is leading the software industry. To acclimatize aptly to this trend, users demand the assessment of software expenses to change with the appropriate model of computing costs of the environment, and some people are actually studying the concept of Object Oriented Function Point and UCP method. Especially, Object Oriented Function Point Measurement Process has good points in overcoming the bound of LOC and the existing the Function Point Measurement Process because Object Oriented Function Point Measurement Process is applicable to the early stage of development project mainly with the used cases, and valid to the life long period as the each stage of software products develops, and always understandable to communicate with users by the UML mark rules. Accordingly, this research is to measure Functional Point at ROFP and AOFP in accordance with the development project of information system by the national defense CBD methodology procedures and UML Interrelation Analysis that are recently and widely used in the developmental environment of object oriented information system. Furthermore, this study suggests the measurement method to obtain Functional Point, and identifies service function and object/class function in the correlation analysis of use case and class based on the products and UML modeling via traditional FPA model and object oriented FPA model. Above all, this study is to demonstrate the improvement of traditional Function Point Measurement Process, IFPUG-CPM and software cost basis, and reveal Function Point Measurement Process, which is appropriate to the development of object oriented information system, and suggest the evaluation results of the compatibility through case studies.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1318-1332
• /
• 1999

본 논문에서는 입출력 응용을 위해 collective I/O 기법을 기반으로 한 실행시간 시스템의 설계, 구현 그리고 그 성능평가를 기술한다. 여기서는 모든 프로세서가 동시에 I/O 요구에 따라 스케쥴링하며 I/O를 수행하는 collective I/O 방안과 프로세서들이 여러 그룹으로 묶이어, 다음 그룹이 데이터를 재배열하는 통신을 수행하는 동안 오직 한 그룹만이 동시에 I/O를 수행하는 pipelined collective I/O 등의 두 가지 설계방안을 살펴본다. Pipelined collective I/O의 전체 과정은 I/O 노드 충돌을 동적으로 줄이기 위해 파이프라인된다. 이상의 설계 부분에서는 동적으로 충돌 관리를 위한 지원을 제공한다. 본 논문에서는 다른 노드의 메모리 영역에 이미 존재하는 데이터를 재 사용하여 I/O 비용을 줄이기 위해 collective I/O 방안에서의 소프트웨어 캐슁 방안과 두 가지 모형에서의 chunking과 온라인 압축방안을 기술한다. 그리고 이상에서 기술한 방안들이 입출력을 위해 높은 성능을 보임을 기술하는데, 이 성능결과는 Intel Paragon과 ASCI/Red teraflops 기계 상에서 실험한 것이다. 그 결과 응용 레벨에서의 bandwidth는 peak point가 55%까지 측정되었다.Abstract In this paper we present the design, implementation and evaluation of a runtime system based on collective I/O techniques for irregular applications. We present two designs, namely, "Collective I/O" and "Pipelined Collective I/O". In the first scheme, all processors participate in the I/O simultaneously, making scheduling of I/O requests simpler but creating a possibility of contention at the I/O nodes. In the second approach, processors are grouped into several groups, so that only one group performs I/O simultaneously, while the next group performs communication to rearrange data, and this entire process is pipelined to reduce I/O node contention dynamically. In other words, the design provides support for dynamic contention management. Then we present a software caching method using collective I/O to reduce I/O cost by reusing data already present in the memory of other nodes. Finally, chunking and on-line compression mechanisms are included in both models. We demonstrate that we can obtain significantly high-performance for I/O above what has been possible so far. The performance results are presented on an Intel Paragon and on the ASCI/Red teraflops machine. Application level I/O bandwidth up to 55% of the peak is observed.he peak is observed.