• Journal of Korean Neurosurgical Society
• /
• 제52권3호
• /
• pp.204-209
• /
• 2012

Objective : The authors performed a retrospective study to assess the accuracy and clinical benefits of a navigation coupled with O-arm$^{(R)}$ system guided method in the thoracic and lumbar spines by comparing with a C-arm fluoroscopy-guided method. Methods : Under the navigation guidance, 106 pedicle screws inserted from T7 to S1 in 24 patients, and using the fluoroscopy guidance, 204 pedicle screws from T5 to S1 in 45 patients. The position of screws within the pedicle was classified into four groups, from grade 0 (no violation cortex) to 3 (more than 4 mm violation). The location of violated pedicle cortex was also assessed. Intra-operative parameters including time required for preparation of screwing procedure, times for screwing and the number of X-ray shot were assessed in each group. Results : Grade 0 was observed in 186 (91.2%) screws of the fluoroscopy-guided group, and 99 (93.4%) of the navigation-guided group. Mean time required for inserting a screw was 3.8 minutes in the fluoroscopy-guided group, and 4.5 minutes in the navigation-guided group. Mean time required for preparation of screw placement was 4 minutes in the fluoroscopy-guided group, and 19 minutes in the navigation-guided group. The fluoroscopy-guided group required mean 8.9 times of X-ray shot for each screw placement. Conclusion : The screw placement under the navigation-guidance coupled with O-arm$^{(R)}$ system appears to be more accurate and safer than that under the fluoroscopy guidance, although the preparation and screwing time for the navigation-guided surgery is longer than that for the fluoroscopy-guided surgery.

• Journal of Korean Neurosurgical Society
• /
• 제61권1호
• /
• pp.75-80
• /
• 2018

Objective : Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique. Methods : S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire. Results : Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium. Conclusion : The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.

• Journal of Korean Neurosurgical Society
• /
• 제61권4호
• /
• pp.503-508
• /
• 2018

Objective : Anterior odontoid screw fixation is a safe and effective method for the treatment of odontoid fractures. The surgical technique is recommended for perforation of the apical cortex of the dens by the lag screw. However, overpenetration of the apical cortex may lead to potentially serious complications such as damages of adjacent vascular and neural structures. The purpose of this study was to assess the role of three-dimensional computed tomography (CT) scan to evaluate the safe margin beyond dens tip to ventral dura for anterior odontoid screw fixation. Methods : We retrospectively analyzed the three-dimensional CT scans of the cervical spines in 55 consecutive patients at our trauma center. The patients included 38 males and 17 females aged between 22 and 73 years (mean age${\pm}$standard deviation, $45.8{\pm}14.2years$). Using sagittal images of 3-dimensional CT scan, the safe margins beyond dens tip to ventral dura as well as the appropriate screw length were measured. Results : The mean width of the apical dens tip was $9.6{\pm}1.1mm$. The mean lengths from the screw entry point to the apical dens tip and posterior end of dens tip were $39.2{\pm}2.6mm$ and $36.6{\pm}2.4mm$. The safe margin beyond apical dens tip to ventral dura was $7.7{\pm}1.7mm$. However, the safe margin beyond the posterior end of dens tip to ventral dura was decreased to $2.1{\pm}3.2mm$, which was statistically significant (p<0.01). There were no significant differences of safe margins beyond dens tip to ventral dura with patient gender and age. Conclusion : Extension by several millimeters beyond the dens tip is safe, if the trajectory of anterior odontoid screw is targeted at the apical dens tip. However, if the trajectory of the screw is targeted to the posterior end of dens tip, extension beyond dens tip may lead to damage immediately adjacent to the vental dura mater.

• 한국임상수의학회지
• /
• 제36권5호
• /
• pp.292-295
• /
• 2019

A 2-year-old, 440 kg, thoroughbred gelding showed a lameness grade of 3 out of 5, as well as swelling and heating on the proximal interphalangeal joint (PIPJ). Periarticular new bones due to the arthritis were observed on performing radiography and ultrasonography. PIPJ arthrodesis was performed under general anesthesia. With the PIPJ open, the articular cartilage was removed by using curette, chisel, and mallet. Arthrodesis was performed with a PIP plate and two additional transarticular cortex screws inserted in lag fashion. A cast was placed over the limb distal from the proximal metatarsal bone. At 6 months after surgery, complete union of the PIPJ was confirmed by radiography, and the incision site was well closed. Based on the outcome, a PIP plate with two additional transarticular cortex screws inserted in lag fashion is recommended as a method for treating osteoarthritis of the PIPJ in horses.

• 대한족부족관절학회지
• /
• 제21권4호
• /
• pp.128-134
• /
• 2017

Purpose: To introduce reliable and newly developed radiographic measures based on a lateral ankle radiograph to assess a syndesmotic reduction after screw fixation and to compare with the radiographic measures based on the anteroposterior (AP) and mortise radiographs. Materials and Methods: The postoperative ankle radiographs of 34 ankle fracture cases after screw fixation for concurrent syndesmosis injury were reviewed. Two radiographic parameters were measured on each AP and mortise radiograph; tibiofibular clear space (TFCS) and tibiofibular overlap (TFO). Five radiographic parameters were measured on the true lateral radiographs; the anteroposterior tibiofibular (APTF) ratio, anterior tibiofibular ratio (ATFR), posterior tibiofibular ratio (PTFR), distances of intersection of the anterior fibular border and the tibial plafond to anterior cortex of the tibia (AA'), and the intersection of posterior fibular border and tibial plafond to the tip of the posterior malleolus (BB'). In addition, the distance (XP) between the fibular posterior margin (X) crossing tibial plafond or the posterior malleolus and posterior articular margin (P) of the tibial plafond was measured on the lateral view. Results: Using TFCS and TFO in the AP and mortise radiographs, malreductions of syndesmosis were estimated in 17 of 34 cases (50.0%). Using the introduced and developed radiographic measures in the lateral radiographs, syndesmotic malreductions were estimated in 16 out of 34 cases (47.1%). Seventeen cases (50.0%) showed no evidence of postoperative diastasis using the radiographic criteria on the AP and mortise view, 10 cases (58.8%) of whom showed evidence of a malreduction on the lateral radiograph. The newly developed measurements, XP, were measured 0 in 11 out of 34 cases (32.4%). Conclusion: The reduction of syndemosis after screw fixation can be accurately assessed intraoperatively with a combination of several reliable radiographic measurements of the lateral radiograph and traditional radiographic measurements of the AP and mortise radiograph.

• 대한정형외과 초음파학회지
• /
• 제6권2호
• /
• pp.60-64
• /
• 2013

원위 요골 골절에 대한 수장부 금속판 고정술이 많이 사용되면서, 합병증으로서, 원위 요골 배측 피질골을 관통한 나사못으로 인해 신전건 활막염이나 파열이 발생할 수 있슴이 보고된 바 있다. 그러나, 나사못에 의한 배측 피질골의 관통여부를 표준 방사선 촬영만으로 정확히 평가하기에는 한계가 있다. 저자들은 수장측 금속판 고정술 후 발생한 신전건 건활막염 및 부분 파열이 의심된 환자에 대하여 수술 전 초음파를 이용하여 나사못에 의한 건활막염 및 활막 종괴 형성 소견을 효과적으로 진단하고 수술적 치료를 시행하여 좋은 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.674-688
• /
• 2003

Statement of Problem : With increasing demand of the implant-supported prosthesis, it is advantageous to use the different platform width of the fixture according to bone quantity and quality of the patients. Purpose : The purpose of this study was to assess the loading distributing characteristics of two implant designs according to each platform width of fixture, under vertical and inclined loading using finite element analysis. Material and method : The two kinds of finite element models were designed according to each platform width of future (4.1mm restorative component x 11.5mm length, 5.0mm wide-diameter restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction, 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction and 200N at the buccal cusp in a 300 transverse direction individually Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. Results : The stresses were concentrated mainly at the cortex in both vertical and oblique load ing but the stresses in the cancellous bone were low in both vertical and oblique loading. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading. Increasing the platform width of the implant fixture decreased the stress in the supporting bone, future and abutment screw. Increased the platform width of fixture decreased the stress in the crown and platform. Conclusion : Conclusively, this investigation provides evidence that the platform width of the implant fixture directly affects periimplant stress. By increasing the platform width of the implant fixture, it showed tendency to decreased the supporting bone, future and screw. But, further clinical studies are necessary to determine the ideal protocol for the successful placement of wide platform implants.

• Clinics in Shoulder and Elbow
• /
• 제17권1호
• /
• pp.2-9
• /
• 2014

Background: Indirect reduction technique offers a valid option in the treatment of proximal humerus fracture. The purpose of this study is to evaluate the functional outcome and the complication rate after indirect reduction and internal fixation of unstable proximal humeral fractures with use of a locking plate. Methods: Twenty four patients with acute proximal humerus fracture were managed with indirect reduction and internal fixation with a locking plate. The mean follow-up period was 15.5 months. Results: The anatomical reduction of the medial cortex buttress was seen in 16 patients (66%) of the Group A and the non-anatomical reduction was seen in 8 patients (33%) of the Group B. Mean union time was $3.2{\pm}1.9$ months; it was $2.2{\pm}0.6$ months in the Group A and $5.3{\pm}2.2$ months in the Group B (p < 0.05). In our series, there were 6 cases of complications and these include 2 cases of varus malunion, 2 cases of shoulder stiffness, 1 case of heterotrophic ossification, 2 cases of screw perforation and 1 case of impingement. Conclusions: We conclude from our studies that indirect reduction and internal fixation using locking plate for acute proximal humerus fracture can give good results with bony union and predictable good overall functional outcome. If the medial cortex buttress is well maintained, a better anatomical reduction would be achieved, the union would be prompted, the pain would be further reduced and the range of the motion would be recovered more promptly.

• 대한정형외과스포츠의학회지
• /
• 제1권1호
• /
• pp.21-25
• /
• 2002

목적: 슬괵건과 대퇴부의고정을 위해새로이 고안된Ligament Anchor (LA) 나사를이용한전방십자인대재건술후 임상결과에평가하고자하였다. 대상및방법: 슬괵건4가닥과LA 나사를이용하여전방십자인대재건술후최소2년이상추시가능하였던 58예를대상으로하였다. 이식건의 고정으로 대퇴골측은 LA나사를, 경골측은 생흡수성 간섭나사를 이용하였다. 평균 추시기간은 28개월이었다. 임상적결과로는 Lachmann 검사와Lysholm 점수를이용하였으며 방사선학적 결과로는 Telos(R) 기기(Telos stress device; Austin & Associates, Inc., Polston, US)를 이용한 전방 전위방사선 사진을 촬영하여 건측과의 전방이완도 차이와 골터널확대정도를평가하였다. 결과: Lysholm 점수는술전평균6 0점에서술후평균94.0점으로호전되었으며, 술전Lachmann 검사상 16예에서 경도의양성, 24예에서중등도, 18예에서 고도의 양성 소견을 보였으며, 술 후 Lachmann 검사상50예는 음성이었으며, 8예에서만 경도의 양성소견을 보였다. Telos(R) 기기를 이용한 전방전위 검사상 건측과의 차이는 술 전 평균12.9 mm에서 최종 추시상 3.1 mm로호전되었다(p<0.05). 대퇴터널은전후방방사선사진상수술직후10.6 mm에서최종추시상12.7 mm(21.1$\%$ )로확장되었으며, 측면방사선사진상술후10.7 mm에서최종추시상12.4 mm(16.5$\%$)로확장되었다(p<0.05). 경골터널은전후방방사선사진상술후9.8 mm에서최종추시상11.8 mm(20.7$\%$)로확장되었으며측면방사선사진상술후9.9 mm에서최종추시상11.7 mm(18.9$\%$)로확장되었다(p<0.05) .결론: 슬괵건과L A나사를이용한전방십자인대재건술은임상성적이우수하며, 슬관절전방동통이나골터널확장등의합병증이적어슬관절의전방안정성을회복하는데좋은이식물및내고정물이라생각된다.

• 대한관절경학회지
• /
• 제7권2호
• /
• pp.189-195
• /
• 2003

목적 : 전방십자인대 손상 환자에서 슬괵건과 LA나사를 이용한 관절경적 전방십자인대 재건술을 시행하고 그 임상적 결과를 고찰하고자 한다. 대상 및 방법 : 1996년 3월부터 2001년 7월까지 슬괵건과 LA나사를 이용한 관절경적 전방십자인대 재건술을 시행받고 술 후 최소 2년이상, 최장 6년(평균 3년) 추시가 가능하였던 101면(104 예)를 대상으로 하였으며, 남자가 86명, 여자가 17명이었다 임상적 결과는 이학적 검사 및 Lysholm Knee score와 Telos기구를 이용한 술전, 술후 전방 전위정도를 측정하여 건측과 비교하여 안정성 여부를 측정하였다. 수술시 평균나이는 32세$(15\~61)$였다. 결과 : Lysholm Knee score는 술전 평균 57.9점이었으며 최종 추시상 평균 95.2점으로 증가하였다. 104예 전예에서 보조기 없이 보행이 가능하였으며, Lachman검사는 술전에는 경도(+)의 양성이 46예$(45\%)$, 중등도(++)의 양성이 33예$(31\%)$, 고도(+++)의 양성이 25$(24\%)$, 였으며, 술후 추시상 90예$(87\%)$에서 음성으로 전환되었으며 14예$(13\%)$에서 경도(+)의 양성이 관찰되었다. Pivot-shift 검사는 술전에 음성을 보인 경우가 22예$(22\%)$, 경도(+)의 양성이 62예$(59\%)$, 중등도(++)의 양성이 12예$(11\%)$, 고도(+++)의 양성이 8예$(8\%)$였으며, 술후 추시상 87예$(84\%)$에서 음성, 17예$(16\%)$에서 경도(+)의 양성을 보였다. Telos기구를 이용한 전방전위검사에서 20lb 검사상 정상 슬관절과의 차이가 술전 평균 $13.4{\pm}5.6 mm$에서 술후 추시상 평균 $3.6{\pm}1.5 mm$ 로 감소하여 전방 전위 안정성이 회복되었으며, 통계학적으로 유의한 차이를 보였다. 슬개골 주위 합병증으로는 대퇴사두고근 위축이 27예 $(26\%)$, 이식건 공여부위의 절개부의 감각이상이 19예$(18\%)$, 슬관절 운동시의 연발음이 13예$(13\%)$, LA 나사의 대퇴 외측 피질골 관통이 5예$(5\%)$에서 관찰되었다. 결론 : 슬괵건과 LA 나사를 이용한 관절경적 전방십자인대 재건술은 강한 고정력을 가져 슬관절의 기능적 안정성을 확보하는데 유용하며, 슬개골 주위 합병증이 적은 효과적인 수술방법으로 생각된다.