• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.321-328
• /
• 2003

Fruits are subjected to complex dynamic stresses in the transportation environment. During a long journey form the production area to markets, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serious fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonant frequency. The determination of the resonant frequencies of the fruit may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. (omitted)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.91-98
• /
• 2016

Linerboards have been produced by recycling recovered paper such as old corrugated containers(OCC). Usually linerboards produced during summer season show weak strength compared with those of produced during winter. In order to cope with the weak strength of linerboards produced during summer, and to confirm uniform quality, it is important to understand the seasonal effect on strength properties. Effect of pulping temperature of the OCC for linearboard production was investigated by controlling pulping temperatures at $18^{\circ}C$ and $51^{\circ}C$. Low pulping temperature ($18^{\circ}C$) caused more generation of fines in stock. Consequently retention and drainage of linerboard defibrated at high pulping temperature ($51^{\circ}C$) were better than those of $18^{\circ}C$. Strength properties of handsheet at low pulping temperature were higher than those of high pulping temperature and it could be confirmed that low pulping temperature during winter is one reason of seasonal variation of recycled linerboard strength. It is considered that surface modification of OCC fibers by harsh pulping action during winter caused increase of paper strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.14-22
• /
• 2016

Pulping is a stage that can change fibrous raw materials into pumpable slurry. Recovered paper can be defibrated to individual fibers by shear stress generated by rotation of a rotor and water. Disintegration of recovered paper is more complicated than that of chemical pulp. When disintegration of recovered paper is poor, screening and cleaning efficiency will be worse and properties of paper will also be deteriorated. Therefore, pulping is an important treatment for improvement of availability of recovered paper and process runnability. In this study, degrees of disintegration of KOCC obtained from a linerboard mill was analyzed with a pilot-scale screen. Flake removal of KOCC slurry was performed by a pilot screen. Simple pumping action gave a positive effect on disintegration of KOCC. After pumping for 10 minutes, paper strength increased without the change of water retention value and fibrillation of KOCC slurry. This phenomena can be explained by modification of hornified surface of KOCC fibers by shear stress generated by pumping. Consequently, disintegration efficiency of KOCC can be enhanced by control of retention time at pulper or an agitation power at chests of papermaking process.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.347-352
• /
• 2003

농산물 포장화물의 경우 농산물의 손상은 겉포장 상자의 파손에 의한 압상이 주요 원인이다. 따라서 농산물 상자의 경우 압축강도를 특히 중요시 여기고 있으며, 한국산업규격을 비롯해 각종 농산물 관련 규정에서는 압축강도에 의한 상자의 품질관리를 규정화 하고 있다. 골판지 상자의 압축강도는 원단인 골판지의 구성 원지들(라이너, 골심지)의 품질과 이들의 구성 형태 및 상자의 외형 치수 비율에 따라 결정되므로, 원지의 링크라쉬(ring crush), 원단의 수직압축강도(edgewise compression strength)를 통해 상자의 압출강도를 관리하는 것이 보통이다. 또한 골판지 상자는 제작 후 유통 과정을 거치면서, 여러 요인에 의해 압축강도가 현격하게 저하되는데, 이중 수분 흡습에 의한 강도저하와 장기 누적하중, 진동 및 충격 등의 피로로 인한 강도 저하가 가장 크다. 여러 산업 분야에서 골판지 상자의 견고성 문제는 물품의 내수 및 수출시 제품에 대한 신뢰성 확보와 기업의 이미지 제고와 직결되는 중요한 사항이다. 특히, 세계 각 국의 농산물 시장이 개방됨에 따라 우리나라 농산물의 수출도 확대될 전망이고 또한 마땅한 대체재가 개발되지 않는 한 골판지 상자의 이용은 날로 증가될 것으로 전망된다. 따라서 골판지 상자의 압축강도와 내구성 향상에 대한 다각적인 연구가 절실하다. (중략)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.61-68
• /
• 2014

The energy efficiency of papermaking process becomes more significant because of various new regulation of the energy consumption and the green house gas emission. In this study, the effects of wood powder addition on the drainage and the drying efficiency of the OCC based paper products, linerboard, were deeply investigated for improving energy efficiency. The fractionation of wood powder depending on the size were conducted. The bigger size of wood powder resulted in the higher bulk and the higher drainage efficiency, but the lower paper strength. The drying efficiency were in detail evaluated depending on the drying process level. In the first section of drying process until the 80% solid level, there were no significant changes in the drying efficiency by the addition of wood powder. However, after the 80 % solid level, the drying efficiency was greatly improved by the addition of wood powder. Those results showed the addition of wood powder could greatly affect not only the drainage in forming and wet pressing but also the drying process.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.83-91
• /
• 2009

It is very difficult to export the fresh agricultural products to long distance countries such as USA and EU without any damage. Fresh products exporting would overcome very severe conditions such as hot and cold weather changes, heavy vibrations with rolling and pitching during the target distribution period, therefore, the packaging needs the immobility of products in the container and the keeping its quality by packaging materials or methods under any surrounding environments, especially. The physical strength of outer box should be designated according to its own characteristics for agricultural product packaging. Packaging dimension which would be fit to standard pallet is also very important factor to reduce the distribution cost. There have been many agricultural products researches for export packaging to the USA so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength and optimum dimension of corrugated fiberboard box which would be used to USA export packaging of fresh melon as well as Japan.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.24-31
• /
• 2001

As a novel method to improve strength properties of recycled test liner, Condebelt press drying system was introduced and adopted into Korea. New press drying treatment could enhance the surface and strength properties in accordance with the increase of sheet density. However, Condebelt drying can not increase the density of repeatedly recycled test liner as much as that of virgin UKP and at the same density condition, the strength of Condebelt press dried UKP is greater than that of press dried test liner. In order to increase the strength of test liner, two attempts were tried in this study. First, addition of polyelectrolytes, dry strength agent was investigated with a view to promote the fiber bonding potential of reclaimed corrugated container pulp. Second, blending effect of fines were analyzed in an aims of increasing density and strength of test liner. The results were as follows; Even in the case of test liner densified by Condebelt press dryer, addition of amphoteric PAM as a dry strength agent was effective in increasing strength properties and so the effect of dry strength agent on improving bonding potential of recycled OCC fiber could be confirmed. As an appropriate addition level of amphoteric PAM, below 1% based on dry pulp weight was suggested. Different from virgin UKP, density of recycled test liner can be increased by the blending of OCC fines and strength properties also can be improved. However, excessive blending of OCC fines could result in decreasing of density and serious weakening of test liner. The best blending ration of fines in test liner can be determined as about 30%. Taking into account the fines content in general OCC pulp as 50%, excessive 20% of fines were supposed to be fractionated and removed in order to achieve the best strength of Condebelt press dried test liner.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.63-63
• /
• 2000

저급의 고지 원료를 두께 방향으로 고온 압착을 가하여 건조함으로써 전반적인 종이 물성 을 향상시키는 콘디벨트 건조 방식은 70년대 중반부터 80년대에 이르는 10여년에 걸친 개발 과정을 거쳤으며 90년대에 들어서 핀랜드의 Inkeroinen에 위치한 V alemt- Tarnpella의 연구 소에 최초의 파일로트 설비가 설치되었으며 그 후 1996년에는 핀랜드 ENSO사의 P Pank밟oski 판지공장에 설치됨으로써 세계 최초의 상업생산설비를 이루게 되었다. 기존의 실린더 건조 기술과 비교할 때 콘디벨트 건조방식은 건조속도를 약 5-15배 향상시킬 수 있 으며, 건조 에너지 절감에 큰 효과가 있을 뿐만 아니라 기존의 실린더 건조시 종이가 폭방 향으로 수축되 어 인장 stiffness와 압축 강도 동의 종이 물성 이 저 하되 는 반면 습윤상태 의 섬유를 120도씨이상에서 가열에 의해 리그닌을 연화시킴과 동시에 섬유의 유연성을 증가시켜 준다. 그리고 높은 압력을 가해줌으로써 섬유간의 결합 면적을 증가시키고 건조시 종이의 폭방향의 수축을 감소시켜 인장강도, 내부결합강도, 밀도, 표면평활성, 투기저항성 등 종이의 물성을 대폭 향상시켜주는 혁신적인 제지기술로 인정받고 있으며 국내의 경우 현재 1998년 부터 상업생산을 이루어짐으로써 그 공헌도는 매우 크다고 할 수 있다. 골판지의 주원료가 되는 국산 골판지 고지 (Korean old corrugated container, K KOCC)의 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반 이상에 달할 뿐만 아니라, 섬유가 각질화와 단섬유화로 인하여 고온압착 건조처리 만으로는 골판지 고지로 생 산된 원지의 강도를 버진펄프로 생산된 원지가 가지는 강도에 준하는 강도로 향상시키는데 한계점을 가지게 된다. 유럽의 제지선진국들은 골판지 원지의 강도를 향상시키는 방편으로 표변에 전분 사이즈 프레스 처리를 도입하였으며 본 연구에서는 고온 압착 건조 처리 설비를 활용한 전분 표면처리의 가능성을 검토하고 골판지 원지의 강도를 향상시키기 위한 표면처리조건을 탐색하였다.