• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.471-474
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as old corrugated containers (OCC) and old newspapers (ONP) with a vacuum forming method. The plate-like cushioning materials made of OCC and ONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^{3}$) were a little higher than that of EPS (${\approx}0.03g/cm^{3}$) and much lower than that of pulp mold (${\approx}0.3g/cm^{3}$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of OCC fibers containing more lignin than ONP show better shock-absorbing properties than ONP Moreover, the cushioning materials made of OCC and ONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to an increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a great role in improving shock-absorbing ability.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.54-59
• /
• 2006

Paperboards used for linerboard of corrugated fiberboard box were coated with different concentrations of polylactic acid (PLA) solution and the effects of harsh environmental conditions such as high humidity and temperature (96% RH at $30^{\circ}C$ for up to 5 days), and freeze-thaw ($-20^{\circ}C$ for a day and then thaw at room temperature for 30 min) conditions on the ring crush (RC) strength of the boards were investigated. One to five percent PLA solutions were coated onto SC manila linerboard ($20{\times}27cm$) using a No. 20 wire bar coater and the ring crush strength was measured using a computer-controlled Advanced Universal Testing System in accordance with TAPPI Test Method T 822 om-93. The RC strength increased significantly when the concentration of coating solution increased and appreciable changes were found when the concentration increased from 0 to 2% (P<0.05). Similar pattern of results was found after 5-day storage at $30^{\circ}C$ and 96% RH. Although such highly humid condition increased moisture content in the samples up to 3.95 from 0.97 times, the RC strength decreased in the range from 29.9 to 48.5%. The freeze-thaw treatment increased the moisture content only up to 1.27% and the reduction in the RC strength ranged from 21.1 to 28.1 %. The results were promising: the samples coated with 5% PLA solution showed 29.9% reduction in the RC strength while that of control was 48.5% during highly humid condition stated above.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.91-98
• /
• 2013

In this study, we have carried out development and performance evaluation of optimized MEMS(Multi-Effect-Multi-Stage) fresh water generator with $7m^2/day$ for solar thermal desalination system. The developed MEMS was composed of high temperature part and low temperature part. This arrangement has the advantage of increasing the availability of solar thermal energy. The MEMS consists of 2 steam generators, 5 evaporators, and 1 condenser. Tubes of heat exchanger used for steam generators, evaporators and condenser were manufactured by corrugated tubes. The performance of the MEMS was tested through in-door experiments, using an electric heater as heat source. The experimental conditions for each parameters were $20^{\circ}C$ for sea water inlet temperature to condenser, $8.16m^2$ /hour sea water inlet volume flow rate, $70^{\circ}C$ for hot water inlet temperature to generator of high temperature part, 3.6 4.8, 6.0 $m^2/hour$ for hot water inlet volume flow rate. As a result, The developed MEMS was required about 85 kW heating source to produce $7m^2/day$ of fresh water. It was analyzed that the performance ratio of MEMS was about 2.6.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권3호
• /
• pp.158-167
• /
• 2004

Condensation heat transfer experiments were conducted with a oblong shell and plate heat exchanger without oil in a refrigerant loop using R-134a. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient $h_r$ and frictional pressure drop ${\Delta}p_f$ of R-134a in a vertical oblong shell and plate heat exchanger. Four vertical counter flow channels were formed in the oblong shell and plate heat exchanger by four plates having a corrugated sinusoid shape of a $45^{\circ}$ chevron angle. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the condensation heat transfer coefficients and pressure drops increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the $h_r\;and\;{\Delta}p_f$. Also, a rise in the average heat flux causes an increase in the $h_r$. But the effect of the average heat flux does not show significant effect on the ${\Delta}p_f$. On the other hand, at a higher saturation temperature, both the $h_r\;and\;{\Delta}p_f$. found to be lower. Based on the present data, the empirical correlations are provided in terms of the Nusselt number and friction factor.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.569-580
• /
• 2005

The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.

• Nuclear Engineering and Technology
• /
• 제18권2호
• /
• pp.107-116
• /
• 1986

새로이 개발된 망상구조 충전탑에서의 중수증류성능해석 및 설계를 위한 정상 및 비정상상태 모델을 수립하였다. 정상상태 모델은 MESH 방정식에 각단의 압력강하를 고려하여 설정하고, Equation Tearing방법으로 그 해를 구하여 중수중류탄내의 농도, 온도 및 압력구배를 얻었다. 비정상상태 거동해석을 위하여 Cohen의 이상단 모델을 수정한 평형단 전이모델을 세웠으며, 그 모델식의 해석적 해를 구함으로써 시간에 따른 중수 농축과정을 예측할 수 있게 되었다. 설정된 모델들은 전환류 중수증류탑에서의 실험결과와 매우 잘 일치하였으며 개발된 충전물임이 높은 이론단수에 낮은 압력강하, 저체류량을 갖는 우수한 중수농축용 충전물임이 확인되었다.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.402-405
• /
• 1999

국내 절화류의 포장 및 유통실태를 조사하고자 부산, 광주, 제주, 충남 및 경기지역을 1997년 10월부터 1998년 2월까지 산지 및 시장을 직접 방문하여 조사하였다. 절화류의 외포장재로는 이중양면 골판지가 주종을 이루고 있었으며 품목별 상자보다는 범용성 상자가 더 많이 사용되고 있었다. 내부포장재로는 재활용 신문지와 폴리에칠렌 필름이 주로 사용되고 있었다. 유통실태는 절화시장에서 도소매가 동시에 이루어지고 있었으며 유통경로는 3가지가 있었는데; 가장 많은 형태가 생산자 $\longrightarrow$ 서울위탁시장을 거쳐 소비자에 이르는 경로로 출하비중은 약 42%에 이른다. 또한, 생산자 $\longrightarrow$ 양재동 화훼공판장 $\longrightarrow$ 도.소매상 $\longrightarrow$ 소비자 경로의 출하비중은 약 18%, 나머지 40%는 생산자 $\longrightarrow$ 산지직.공판장 및 지방위탁시장 $\longrightarrow$ 도ㆍ소매상 $\longrightarrow$ 소비자의 경로였다. 절화류의 유통현대화를 위해서는 규격포장을 사용하여 출하하는 것이 바람직하다고 판단되었다.

• 한국식품저장유통학회지
• /
• 제6권4호
• /
• pp.406-410
• /
• 1999

기능성 MA필름을 생산하여 이를 골판지 상자의 내부에 첩합시킨 FC상자의 활용가능성을 조사하고자 골판지 상자와 기능성 MA필름대를 골판지 상자 내부의 1면당 4곳씩 첩합시킨 FC포장구와 0.03, 0.05mm 두께의 LDPE 필름(30LD, 50LD)으로 애호박을 포장하여 2$0^{\circ}C$에 저장하여 품질변화를 조사한 결과, FC 상자와 30LD와 50LD 포장구는 대조구 보다는 중량 감소율이 현저히 낮았으며 Vitamin C의 함량도 대조구 보다 FC 포장구가 26% 높게 유지되고 있고, 클로로필도 대조구 보다 16% 정도 더 높게 유지되고 있었다. 소비자 측면에서 살펴본 시장성도 FC 포장구는 대조구 보다는 2-3일, LD포장구 보다는 1-2일정도 더 시장성이 있는 것으로 나타났다.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.52-58
• /
• 2020

Bellows are corrugated mechanical elements used to absorb displacements or vibrations caused by temperature changes, pressure, earthquakes, waves, etc., which are welded to flanges or directly connected to pipes. Expansion joint bellows must not only be designed to sufficiently withstand the internal pressure of the pipes but also accommodate axial, transverse, and rotational deformations to minimize the transfer of forces to the sensitive components of the system. Bellows have various types of corrugations, but U-type bellows are most commonly used in general piping systems. In this study, the behavior of U-shaped one-, two-, and three-ply bellows with the same inner diameter under pressure and forced displacement was analyzed using the finite element method. The results were compared with the design formula in the Expansion Joint Manufacturers Association (EJMA)'s code. Manufacturer data were used for the applied pressure and force displacement. The behavioral characteristics of the three cases were compared via structural analysis because the stress levels will be different for each model, even if they have the same inner diameter. Since the analytical model has an axisymmetric shape but displacement occurs in the transverse direction, the finite element model was composed of 1/2 of the whole model, and ANSYS Workbench 17.2 was employed for the analysis.

• Composites Research
• /
• 제33권6호
• /
• pp.408-414
• /
• 2020

샌드위치 구조는 우수한 강도와 경량성을 동시에 만족하는 구조물로써 다양한 분야에서 널리 사용되고 있다. 스킨은 주로 고강도의 섬유가, 코어는 경량화에 유리한 허니콤 구조 및 발사(balsa) 나무가 주로 사용되고 있으나, 내부의 공기층 및 난연처리의 어려움으로 인하여 화재에 취약하는 것이 단점이다. 본 연구에서는 대나무 섬유의 난연처리 연구를 통하여 친환경적인 소재를 이용한 난연처리 조건을 제시하였다. 또한 대나무 섬유를 이용하여 천연섬유 샌드위치 복합재료를 제조하고 기계적 특성평가를 수행하였다. 난연성이 향상된 천연섬유를 이용하여 샌드위치 구조의 복합재료를 제조한다면 새로운 유형의 복합재료가 될 수 있을 것으로 기대된다.