• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.89-98
• /
• 2016

In this paper, we proposed an automated areal feature matching method based on geometric similarity without user intervention and is applied into areal features of many-to-many relation, for confusion of spatial data-sets of different scale and updating cycle. Firstly, areal feature(node) that a value of inclusion function is more than 0.4 was connected as an edge in adjacency matrix and candidate corresponding areal features included many-to-many relation was identified by multiplication of adjacency matrix. For geometrical matching, these multiple candidates corresponding areal features were transformed into an aggregated polygon as a convex hull generated by a curve-fitting algorithm. Secondly, we defined matching criteria to measure geometrical quality, and these criteria were changed into normalized values, similarity, by similarity function. Next, shape similarity is defined as a weighted linear combination of these similarities and weights which are calculated by Criteria Importance Through Intercriteria Correlation(CRITIC) method. Finally, in training data, we identified Equal Error Rate(EER) which is trade-off value in a plot of precision versus recall for all threshold values(PR curve) as a threshold and decided if these candidate pairs are corresponding pairs or not. To the result of applying the proposed method in a digital topographic map and a base map of address system(KAIS), we confirmed that some many-to-many areal features were mis-detected in visual evaluation and precision, recall and F-Measure was highly 0.951, 0.906, 0.928, respectively in statistical evaluation. These means that accuracy of the automated matching between different spatial data-sets by the proposed method is highly. However, we should do a research on an inclusion function and a detail matching criterion to exactly quantify many-to-many areal features in future.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.26-35
• /
• 1987

As an attempt to make the multi-objection for the line design of the rope way, the resulted formulas from the catenary curve as exact ones were summarized, and it was found out that the Kuhn-Tucker's optimality conditions and regions of the objective functions can analytically be expressed with dimensionless parameters. The Pareto's optimum solution set was analytically obtained through the objective function-the minimum relation of $W^{*}$, and $W^{*}$ is a trade-off relation. From this, The dimension of a rope and the value of an initial tension that are the standard in design of the rope way were determined. It was concluded that $V^{*}$ should become minimum, and that the ratio of the dimension of rope to the value of and initial tension become larger than superposition factor corresponding to curve AB.to curve AB.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.69
• /
• pp.153-178
• /
• 2016

The United Nations Convention on the International Sale of Goods(CISG) leaves a number of aspects concerning commercial sales untouched. In particular, it is not concerned with the validity of the contract or of any of its provisions or of any usage. And UNIDROIT don't deal with all-round validity in International Commercial Contract. Especially, UNIDROIT includes declaration of intention department. The UNIDROIT contains the chapter 3 on the "validity" in terms of the defects of consent such as mistake, fraud, and threat as well as "gross disparity". Notwithstanding these provisions, the Principles did not deal with invalidity arising from the lack of capacity or authority, or immorality or illegality. On the other hand, there are arguments that the corresponding provisions of the Principles of International Commercial Contracts(UNIDROIT Principles; PICC). Therefore, Validity in International Commercial Contract is delegate by Each Country Law. So Trade practicer should know full well about Each Country Law Position. People(human, corporation, company) of position Trade practice classify each country civil law relation to validity of commercial contract. This paper is to examine the Validity of UNIDROIT Principles. Also this paper analyses comparison on each country position relation to capacity of right, capacity to act, illegality of contract, declaration of intention. In conclusion, This paper expect that people of trade practice makes use of analysis knowledge.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1437-1448
• /
• 1996

This paper presents a simplified model for approximate analysis of the solute redistribution in coarsening dendrite arms during solidification of binary metal alloys. By introducing a quadratic concentration profile with a time-dependent coefficient, the integral equation for diffusion in the solid phase is reduced to a simple differential relation between the coefficient and the solid-liquid interface position. The solid fraction corresponding to the system temperature is readily determined from the relation, phase equilibrium and the overall solute balance in which the liquid phase is assumed to be completely mixed. In order to validate the developed model, calculations are performed for the directional solidification of Al-4.9 mass Cu alloy. The predicted eutectic fractions for a wide range of the cooling rate reasonably agree with data from the well-known experiment as well as sophisticated numerical analyses. Also, the results for the back diffusion limits are consistent with available references. Additional calculations show that the characteristic parameters such as the coarsening, density variation and nonlinarity in the phase diagram significantly affect the microsegregation. Owing to the simplicity, efficiency and compatibility, the present model may be suitable for the micro-macroscopic solidification model as a microscopic component.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.2
• /
• pp.135-141
• /
• 2004

This paper proposes a new heuristic search technique for obstacle avoidance of autonomous underwater vehicles equipped with a looking ahead obstacle avoidance sonar. We suggest the fuzzy relation between the sonar sections and the properties of real world environment. Bandler and Kohout's fuzzy relational method are used as the mathematical implementation for the analysis and synthesis of relations between the partitioned sections of sonar over the real-world environmental properties. The direction of the section with optimal characteristics would be selected as the successive heading of AUVs for obstacle avoidance. For the technique using in this paper, sonar range must be partitioned into multi equal sections; membership functions of the properties and the corresponding fuzzy rule bases are estimated heuristically. With the two properties Safety, Remoteness and sonar range partitioned in seven sections, this study gives the good result that enables AUVs to navigate through obstacles in the optimal way to goal.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.200-208
• /
• 1999

The statics relation of the Stewart platform has been investigated from the viewpoint of the forward and inverse force transmission analyses. Two eigenvalue problems corresponding to the forward and inverse force transmission analyses have been formulated. The forward force transmission analysis is to determine the ranges of the magnitudes of the force and moment generated at the end-effector for the given magnitude of linear actuator forces. In reverse order, the inverse force transmission analysis is to find the range of the magnitude of actuator forces for the given ranges of the magnitudes of the force and moment at the end-effector. The inverse force transmission analysis is important since it can provide a designer with a valuable information about how to choose the linear actuators. It has been proved that two eigenvalue problems have a reciprocal relation, which implies that solving either of the eigenvalue problems may complete the forward/inverse force transmission analysis. A numerical example has been also presented.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.85-89
• /
• 2005

Lineament maps are the important tools that may reveal points of groundwater recharge, flow and development. In particular, groundwater flows and yields in mountainous area, composed of crystalline rocks with many fractures, are governed mainly by the lineaments corresponding to fractures, joints and faults. Lineaments may give important information on the best distribution of wells and their management. For two districts; Pohang and Cheonan, the relationship between lineament and groundwater factors was analyzed. To compare groundwater productivity, storativity, and transmissivity of a well site along the distance to lineament, the distances to lineament was regrouped into five groups with an equal range, 100m, for the Pohang district and they are also divided into five groups with an equal range, 150m, for the Cheonan district. From the results of the Spearman Rank Correlation Analysis and Kendall Analysis for each group, the means of SPC and T of wells which are located near lineaments generally have large values. The means of SPC and T show a reverse linear relationship with a lineament distance, but the means of S shows a disperse distribution and no distinct linear relation. Result of the linear regression model between SPC and lineament length density shows that it will be effective to use the lineament length density map when finding the optimal well site on a regional scale.

• Computers and Concrete
• /
• v.2 no.1
• /
• pp.1-18
• /
• 2005

This paper presents a study on the effects of localized steel-concrete bond degradation on the flexural behaviour of RC beams. A finite element analysis is undertaken to complete the experimental analysis. The first part deals with an experimental study on beams where bond was removed by using plastic tube at different locations and for various lengths. The flexural behaviour was studied at global scale (load-deflection) and local scale (moment-curvature). The second part, a numerical study using a simplified special finite element (rust element) modelling the rust layer occurring between reinforcement and concrete with corrosion was conducted in order to find the relation between the degree of corrosion and the degradation of the steel-concrete bond. The computed value of the corrosion degree corresponding to the total degradation of bond has been used in a second time to model the tests, in order to evaluate the influence of the loss of bond, the steel cross section reduction, and the combination of both. The results enable to evaluate the influence of the different corrosion effects on the flexural behaviour, according to the length and the location of the corroded zone.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.1
• /
• pp.65-74
• /
• 2008

Light creates ambiance that affects our impression of space. Before the modern age, the role of light is a religious factor and a primitive state to see. In the modern space design, light is used to achieve the continuous transformation and translation of building's image. Ever-changing space is a flexible corresponding of space to its environment, caused by certain dynamic light. The space turn into some other thing from what it was before, or just changing its character. approaching men and society with different meanings. The purpose of this study is to explore the relation between light(natural and artificial) and ever-changing space through the case study. The impacts of light on ever-changing in today's space design can be summarized as follows. 1) Materialization of light in space design. Nowadays light becomes a form itself. The geometric properties of the space form playa secondary role as compared to the importance assigned to light. 2) Pixelization of space by a light effect. The impacts of digital technology on the space design have come through enhancing the 'pixelization' of the surface from which buildings are made their responsiveness and adaptability to changing needs. The surface with ever-changing lights that blur the boundary of space and expand the image of space.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4617-4632
• /
• 2021

IEEE 802.11ax is a protocol being developed for high-density Wireless Local Area Networks (WLAN). Several algorithms have been proposed to improve the level of spatial reuse applied in IEEE 802.11ax. However, these algorithms are tentative and do not specify how to select the transmit power and carrier sense threshold in practice; It is unclear when and why the tuned parameters lead to better network performance. In this paper, we restricted the scale of transmit power tuning to prevent the case of backfire in which spatial reuse will result in transmission failure. If the restrictions cannot be satisfied, spatial reuse will be abandoned. This is why we named the proposed scheme as Arbitration based Spatial Reuse (ASR). We quantified the network performance after spatial reuse, and formulate a corresponding maximum problem whose solution is the optimal carrier sense threshold and transmit power. We verified our theoretical analysis by simulation and compared it with previous studies, and the results show that ASR improves the throughput up to 8.6% compared with 802.11ax. ASR can avoid failure of spatial reuse, while the spatial reuse failure rate of existing schemes can up to 36%. To use the ASR scheme in practice, we investigate the relation between the optimal carrier sense threshold and transmit power. Based on the relations got from ASR, the proposed Relation based Spatial Reuse (RSR) scheme can get a satisfactory performance by using only the interference perceived and the previously found relations.