• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.463-471
• /
• 2024

Average and local convective heat transfer coefficients of nitrogen are measured experimentally in an electrically heated circular tube for a range of Reynolds number from 1.08 × 10⁴ to 3.60 × 10⁴, and wall-to-bulk temperature ratio from 1.01 to 1.77. The exit Mach number is up to 0.17, and the heat flux is up to 46 kW·m^-2. The molybdenum test section has a 62 diameters heated section with an inside diameter of 5 mm and a 30 diameters entrance section to ensure the fully-developed flow. Uncertainty of Nusselt number is less than 1.6 % in this study. The results indicate that the average heat transfer correlations evaluated by both the bulk and the modified film Reynolds numbers agree well with the experimental data. The local heat transfer results based on bulk properties are compared with previous empirical correlations. New prediction correlations are recommended which are significantly affected by the property variation and heated length. The comparison between the proposed correlations and experimental points shows that 88 % of experimental data fall into an error of 10 %, and almost all data are within an error of 20 %.

• Geomechanics and Engineering
• /
• v.36 no.3
• /
• pp.259-276
• /
• 2024

The undrained shear strength is widely acknowledged as a fundamental mechanical property of soil and is considered a critical engineering parameter. In recent years, researchers have employed various methodologies to evaluate the shear strength of soil under undrained conditions. These methods encompass both numerical analyses and empirical techniques, such as the cone penetration test (CPT), to gain insights into the properties and behavior of soil. However, several of these methods rely on correlation assumptions, which can lead to inconsistent accuracy and precision. The study involved the development of innovative methods using extreme gradient boosting (XGB) to predict the pile set-up component "A" based on two distinct data sets. The first data set includes average modified cone point bearing capacity (q_t), average wall friction (f_s), and effective vertical stress (σ_vo), while the second data set comprises plasticity index (PI), soil undrained shear cohesion (S_u), and the over consolidation ratio (OCR). These data sets were utilized to develop XGBoost-based methods for predicting the pile set-up component "A". To optimize the internal hyperparameters of the XGBoost model, four optimization algorithms were employed: Particle Swarm Optimization (PSO), Social Spider Optimization (SSO), Arithmetic Optimization Algorithm (AOA), and Sine Cosine Optimization Algorithm (SCOA). The results from the first data set indicate that the XGBoost model optimized using the Arithmetic Optimization Algorithm (XGB - AOA) achieved the highest accuracy, with R2 values of 0.9962 for the training part and 0.9807 for the testing part. The performance of the developed models was further evaluated using the RMSE, MAE, and VAF indices. The results revealed that the XGBoost model optimized using XGBoost - AOA outperformed other models in terms of accuracy, with RMSE, MAE, and VAF values of 0.0078, 0.0015, and 99.6189 for the training part and 0.0141, 0.0112, and 98.0394 for the testing part, respectively. These findings suggest that XGBoost - AOA is the most accurate model for predicting the pile set-up component.

• Transactions of Materials Processing
• /
• v.33 no.2
• /
• pp.103-111
• /
• 2024

With the increasing global interest in carbon neutrality, the automotive industry is also transitioning to the production of eco-friendly cars, specifically electric vehicles. In order to achieve comparable driving distances to internal combustion engine vehicles, the application of high-capacity battery packs has led to an increase in vehicle weight. To achieve light-weighting and durability requirements of automotive components simultaneously, there is a demand for research on the application of Ultra-High Strength Steel (UHSS). However, when manufacturing chassis components using UHSS, there are challenges related to fracture defects due to lower elongation compared to regular steel sheets, as well as spring-back issues caused by high tensile strength. In this study, a simulated specimen that is not affected by the property changes of four materials was designed to improve formability of the rear cross member, which is the most challenging automotive chassis component. The influence and correlation of material-specific variables were analyzed through finite element analysis (FEA) for each material with tensile strength of 440, 590, 780, and 980 MPa grades, resulting in the development of a predictive equation. To validate the equation, the simulated specimens of 980 MPa grade were produced from the test molds. Then the reliability of the FEA and predictive equation was verified with measured specimen data using a 3D scanner. The results of this study can be proposed to improve the formability of UHSS chassis components in future researches.

• Journal of the Korean Chemical Society
• /
• v.68 no.4
• /
• pp.185-190
• /
• 2024

Recently, it was reported that the benzobisoxazole (BBO) molecule can be used for independent modulation of the HOMO and LUMO energy levels. In this study, we utilized this interesting property of BBO to quantitatively investigate the substituent effects according the substituents. We designed and proposed four BBO model systems (1BBO, 2BBO, 3BBO and 4BBO) by extending the π-conjugation lengths based on a BBO molecule. Two directions of substitution (x-axis and y-axis) and 15 various substituents were considered. From strong correlation between the LUMO energy levels of x-axis substitution and HOMO energy levels of y-axis substitution calculated from DFT method, it is found that the standardization of substitution effects can be established from BBO model systems. In addition, we demonstrated that the HOMO values of y-axis substituted 3BBO show the best performance to define the order of substituent effects. Our proposed way can be used to expect the substituent effect of any arbitrary substituents and develop the organic sensors and organic light emitting diodes.

• Journal of Internet Computing and Services
• /
• v.25 no.4
• /
• pp.97-108
• /
• 2024

Ethical and technical problems are becoming serious as the industrialization of artificial intelligence robots becomes active, research on risk is insufficient. In this situation, the researcher developed 52 verified indicators that can measure the body, rights, property, and social risk of artificial intelligence robots. In order to develop measurement indicators for each type of risk of artificial intelligence robots, 11 experts were interviewed in-depth after IRB deliberation. IIn addition, 328 workers in various fields where artificial intelligence robots can be introduced were surveyed to verify their fieldwork, and statistical verification such as exploratory factor analysis, reliability analysis, correlation analysis, and multiple regression analysis was verifyed to measure validity and reliability. It is expected that the measurement indicators presented in this paper will be widely used in the development, certification, education, and policies of standardized artificial intelligence robots, and become the cornerstone of the industrialization of artificial intelligence robots that are socially sympathetic and safe.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1159-1170
• /
• 2000

It is necessary to improve the ambient air quality through the proper treatment and control of pollutants by designating air pollutants to regulatory ones. Especially, human took a concern for particulate matters which raised visibility reduction, public health effects and injury of property for urban areas. In order to reduce the effect of particulate matters, we need to establish proper control strategies based on the concentration characteristics of particulate matters. In this study. to evaluate the characteristics of $PM_{2.5}$ and $PM_{10}$. thirty-eight samples of $PM_{2.5}$ and $PM_{10}$ were collected at Nam-Gu sampling site where continuous air monitoring system has been operated, from May, 1999 to November, 1999, and their concentrations for the mass and anion components($Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$) were analyzed. The important conclusions obtained in this study were as followings. Total average mass concentrations of $PM_{2.5}$ and $PM_{10}$ were 35.016 and $50.293{\mu}g/m^3$ respectively. and $PM_{2.5}/PM_{10}$ ratio was calculated 0.692. Total average concentrations of anion components in $PM_{2.5}$ were $1.581(Cl^-)$, $3.690(NO_3{^-})$ and $12.825(SO_4{^{2-}}){\mu}g/m^3$ and those in $PM_{10}$ were $2.471(Cl^-)$, $5.819(NO_3{^-})$ and $14.414(SO_4{^{2-}}){\mu}g/m^3$ respectively. From the correlations analysis. the correlation coefficient between mass concentration of $PM_{2.5}$ and $PM_{10}$ was calculated as 0.945. The correlation coefficients between $PM_{2.5}$ and anion components were analyzed as $Cl^-$(0.025), $NO_3{^-}$(0.788) and $SO_4{^{2-}}$(0.500) respectively, and the correlation coefficients between $PM_{10}$ and anion components were analyzed as $Cl^-$(-0.019), $NO_3{^-}$(0.806) and $SO_4{^{2-}}$)(0.535) respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.19-24
• /
• 2020

In this work, the electrical property of Si-doped β-Ga2O3 was investigated via a post-growth annealing process. The Ga2O3 samples were annealed under air (O-rich) or N2 (O-deficient) ambient at 800~1,200℃ for 30 mins. There was no correlation between the crystalline quality and the electrical conductivity of the films within the experimental conditions explored in this work. However, it was observed the air ambient led to severe degradation of the film's electrical conductivity while N2-annealed samples exhibited improvement in both the carrier concentration and Hall mobility measured at room temperature. Interestingly, the x-ray photoemission spectroscopy (XPS) revealed that both annealing conditions resulted in higher concentration of oxygen vacancy (VO). Although it was a slight increase for the air-annealed sample, high resistivity of the film strongly suggests that VO cannot be a shallow donor in β-Ga2O3. Therefore, the enhancement of the electrical conductivity of N2-annealed samples must be originated from something other than VO. One possibility is the activation of Si. The XPS analysis of N2-annealed samples showed increasing relative peak area of Si 2p associated with SiOx with increasing annealing temperature from 800 to 1,200℃. However, it was unclear whether or not this SiOx was responsible for the improvement as the electrical conductivity quickly degraded above 1,000℃ even under N2 ambient. Furthermore, XPS suggested the concentration of Si actually increased near the surface as opposed to the shift of the binding energy of Si from its initial chemical state to SiOx state. This study illustrates the electrical changes induced by a post-growth thermal annealing process can be utilized to probe the chemical and electrical states of vacancies and dopants for better understanding of the electrical property of Si-doped β-Ga2O3.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.377-398
• /
• 1999

Calcium fluoride, created by topical fluoride application, is the reservoir for fluoride ion regulated by pH in the oral environment. Therefore, the amount and the maintenance of calcium fluoride have an important role in preventing dental caries. The aim of this study is to evaluate the effect of Nd:YAG laser irradiation on the generation of calcium fluoride and the acid resistance of tooth enamel. The bovine anterior permanent teeth were prepared (n=276), and divided into following groups : no treatment (control) fluoride application alone, laser irradiation alone, laser irradiation after fluoride application, and fluoride application after laser irradiation. And each group was subdivided based on the application time of 1.23% acidulated phosphate fluoride (APF) (5 min and 30 min) and the irradiation energy of Nd:YAG laser ($20J/cm^2\;and\;40J/cm^2$). In case of fluoride application, each group was divided according to KOH treatment. Twenty three treatment conditions were made for this experiment and twelve specimens were assigned to each treatment condition. In each treatment condition, ten specimens were used for chemical analysis and two specimens were observed under SEM. In groups without treating KOH, fluoride content and the depth of enamel dissolved were measured using enamel biopsy technique. In groups with treating KOH, the amount of calcium fluoride was measured by the treatment with 1 M KOH for 24 hours and enamel biopsy was performed after KOH treatment. The results were analyzed by the fluoride content and the depth of enamel dissolved by enamel biopsy, amount and thickness of calcium fluoride, and the surface structures of enamel. The results are as follows: 1. In groups without treating KOH, the fluoride content of removed enamel showed a positive relationship with the energy density of laser when the laser irradiated before fluoride application 2. In groups without treating KOH, the depth of enamel dissolved decreased more with the combined laser and fluoride treatment than with laser or fluoride treatment, except for the case of $20J/cm^2$ laser irradiation after 5 minute fluoride application (p<0.05). 3. The amount of calcium fluoride did not increased by laser treatment with no statistical significance(p>0.05). 4. The particle size of calcium fluoride increased in case of fluoride treatment after laser irradiation, compared with fluoride application alone. In case of laser treatment after fluoride application, the particle size of calcium fluoride increased and some of the particles fused as well. 5. There were no significant differences in the fluoride content of dissolved enamel between groups without treating KOH and control group, except for the case of laser irradiation after treatment of APF for 30 minutes (p>0.05). 6. In groups with treating KOH, depth of removed enamel in the groups of combined treatment with laser and fluoride was shallower than that in fluoride application groups (p<0.05). 7. In groups without treating KOH, the relationship between fluoride content and the depth of enamel dissolved showed more negative (Spearman correlation coefficient: -0.6281) than in groups with treating KOH (Spearman correlation coefficient: -0.3792). The greater amount of calcium fluoride could be found in case where there was a significant differences of the depth of enamel dissolved between groups with and without treating KOH. From these results, it can be concluded that laser seems to be a little effects on the amount of calcium fluoride formation, but has some effect on the lowering the solubility of calcium fluoride. As the combined treatment of laser and fluoride application showed more effective acid-resistant property, more extended recall period for fluoride application can be achieved with this combined treatment in the clinic.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.477-496
• /
• 2015

Emotional awareness is the image of a person is represented by different tendencies. Currently, the emotion computing to objectively evaluate the emotion recognition research is being actively studied. However, existing emotional computing research has many problems to run. First, the non-objective in emotion recognition if it is inaccurate. Second, the correlation between the emotion recognition is unclear points. So to test the regularity of image sensitivity to the need of the present study is to control emotions in the computing system. In addition, the screen number of the emotion recognized for the purpose of this study, applying the method of objective image emotional computing system and compared with a similar degree of emotion of the person. The key features of the image emotional computing system calculates the emotion recognized as numbered digital form. And to study the background of emotion computing is a key advantage of the effect of the James A. Russell for digitization of emotion (Core Affect). Pleasure emotions about the core axis (X axis) of pleasure and displeasure, tension (Y-axis) axis of tension and relaxation of emotion, emotion is applied to the computing research. Emotional axis with associated representative sensibility very happy, excited, elated, happy, contentment, calm, relaxing, quiet, tired, helpless, depressed, sad, angry, stress, anxiety, pieces 16 of tense emotional separated by a sensibility ComputingIt applies. Course of the present study is to use the color of the color key elements of the image computing formula sensitivity, brightness, and saturation applied to the sensitivity property elements. Property and calculating the rate sensitivity factors are applied to the importance weight, measured by free-level sensitivity score (X-axis) and the tension (Y-axis). Emotion won again expanded on the basis of emotion crossed point, and included a representative selection in Sensibility size of the top five ranking representative of the main emotion. In addition, measuring the emotional image of a person with 16 representative emotional score, and separated by a representative of the top five senses. Compare the main representative of the main representatives of Emotion and Sensibility people aware of the sensitivity of the results to verify the similarity degree computing emotion emotional emotions depending on the number of representative matches. The emotional similarity computing results represent the average concordance rate of major sensitivity was 51%, representing 2.5 sensibilities were consistent with the person's emotion recognition. Similar measures were the degree of emotion computing calculation and emotion recognition in this study who were given the objective criteria of the sensitivity calculation. Future research will need to be maintained weight room and the study of the emotional equation of a higher concordance rate improved.

• Journal of Families and Better Life
• /
• v.2 no.1
• /
• pp.35-55
• /
• 1984

This study aims to present basic data for a reasonable home management through investigating the change of home economy conditions incidental to the family life cycle, also through analyzing the effect of socio-anthropological variables on the family-life cycle. The data investigation using the questionnaires method was conducted on housewives in Seoul as the central census tract. Housewives as the subject of investigation were chosen by the method of the purpose-sampling in consideration of the regional differences and the socio-economical strata. Nine hundred and forty questionnaires were distributed to housewives but seven hundred questionnaires were collected. Only five hundred and ten questionnaires of them were analyzed in this study. The frequency and the percentage of collected data, first of all, were founded in order to grasp the general characteristics of the subject of investigation. To classify the stage of family life cycle, the correlations of the classifying factors among each group were examined x2 Test and One-Way ANOVA were applied to explore the differences among each stage of the change of household-economy. And the effect of socio-anthropological variables on the change of household- economy was analyzed by Two-way ANOVA. the conclusions derived from the results of this study are as follows; 1) The marriage-period and the educational conditions of the first child were selected as the classifying factors through analyzing correlation among the age, the marriage-period and the educational conditions of their children. As a result of this analysis, the family life cycle were classified into seven stages: Stage 1; Establishment Stage 2; Preschool family Stage 3; Elementary school family stage 6; Adult period family Stage7; Marriage period family . 2) The change of household economy incidental to the progress of family life cycle has a significant differences in all of variables (except the other member of family's income) Stage 1; Though the husband's income and the income from property are on a low level, the total income is on a high level due to the housewife's income. Stage 2; The total income is on a low level owing to the decrease of house wife's income, though the husband's income keep growing. Stage 3; Owing to the increase of husband's income, the cost of living as well as the total income keeps growing but the savings are on the decrease. Stage 4; Compared with Stage 3, the total income tends to be on a low level but the living expenses are on the increase. Stage 5; The husband's income is on the highest level in the stages of family life cycle. The total income and the living expenses are on a high level. Stage 6; The income of husband and housewife are on the remarkable decrease but the children's income is on the increase. Stage 7; Owing to the increase of the children's income and the income from property, the total income is on the highest level in the stages of family life cycle. 3) Considering the effect of socio-anthropological variables on the conditions of household-economy, family system has an significant effect on children's income. the husband's occupation exerts a significant effect upon the housewife's and children's income. The husband's schooling exercises an effect upon the children's income. S.E.S has a important effect on the income of husband, housewife and children. From the above results, it is found that the change of household-economy conditions is incidental to the progress of family life cycle. Therefore, a suitable measure to cope with the desire of family and the conditions of household-economy should be prepared, in order to carry on a reasonable home management.