• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.433-438
• /
• 2017

오늘날의 네트워크는 고속화와 유비쿼터스 환경으로 인해 다양한 응용이 급속도로 생성되고 있으며 네트워크 트래픽도 매우 복잡해지고 있다. 이에 효율적인 네트워크 운용 및 관리를 위한 구체적인 단위의 트래픽 분류가 필수적이다. 다양한 트래픽 분류 방법이 연구되고 있는 가운데 아직 트래픽을 완벽하게 분류해내는 방법론은 개발되지 않은 실정이다. 이에 본 논문에서는 네트워크 플로우의 연관성 모델을 정의하고 이를 기반으로 트래픽을 분류하는 방법을 제안한다. 트래픽 분류를 위한 네트워크 플로우의 연관성 모델은 크게 유사성 모델과 연결성 모델로 이루어진다. 제안하는 방법론을 효과적으로 적용하기 위한 방안을 제시하며 실험을 통해 본 분류 방법론이 높은 정확도와 분석률의 방법론이라는 것을 증명한다.

• Nuclear Engineering and Technology
• /
• 제44권6호
• /
• pp.639-652
• /
• 2012

A three-dimensional discrete fracture network model was developed in order to simulate the hydraulic characteristics of a granitic rock mass at Korea Atomic Energy Research Institute (KAERI) Underground Research Tunnel (KURT). The model used a three-dimensional discrete fracture network (DFN), assuming a correlation between the length and aperture of the fractures, and a trapezoid flow path in the fractures. These assumptions that previous studies have not considered could make the developed model more practical and reasonable. The geologic and hydraulic data of the fractures were obtained in the rock mass at the KURT. Then, these data were applied to the developed fracture discrete network model. The model was applied in estimating the representative elementary volume (REV), the equivalent hydraulic conductivity tensors, and the amount of groundwater inflow into the tunnel. The developed discrete fracture network model can determine the REV size for the rock mass with respect to the hydraulic behavior and estimate the groundwater flow into the tunnel at the KURT. Therefore, the assumptions that the fracture length is correlated to the fracture aperture and the flow in a fracture occurs in a trapezoid shape appear to be effective in the DFN analysis used to estimate the hydraulic behavior of the fractured rock mass.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.461-473
• /
• 2008

The paper explores the potential of Support Vector Machines (SVM) approach in predicting 28-day compressive strength and slump flow of self-compacting concrete. Total of 80 data collected from the exiting literature were used in present work. To compare the performance of the technique, prediction was also done using a back propagation neural network model. For this data-set, RBF kernel worked well in comparison to polynomial kernel based support vector machines and provide a root mean square error of 4.688 (MPa) (correlation coefficient=0.942) for 28-day compressive strength prediction and a root mean square error of 7.825 cm (correlation coefficient=0.931) for slump flow. Results obtained for RMSE and correlation coefficient suggested a comparable performance by Support Vector Machine approach to neural network approach for both 28-day compressive strength and slump flow prediction.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.33-38
• /
• 2007

Fan selection procedure and fan noise evaluation method are presented for the system electronic cooling by combining FNM(Flow Network Model) and fan noise correlation model. Internal flow paths and distribution in electronic system we analyzed by using the FNM with the flow resistances for flow elements of the system. Based on the fan operation point predicted from the FNM analysis results, the present fan noise model predicts overall sound power, pressure levels and spectrum. The predictions of the flow distribution, the fan operation and the noise level in electronic system by the present method are well agreed with 3-D CFD and actual test results.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.47-56
• /
• 2014

Since a typical plate heat exchanger is made up of a huge number of unitary cells, it may be impossible to predict the aero-thermal performance of the full scale heat exchanger through three-dimensional numerical simulation due to the enormous amount of computing resources and time required. In the present study, a simple flow-network model using the friction factor correlation and a thermal-network model based on the effectiveness-number of transfer units (${\varepsilon}$-NTU) method has been developed. The complicated flow pattern inside the cross-corrugated heat exchanger has been modeled into flow and thermal networks. Using this model, the heat transfer between neighboring streams can be considered, and the pressure drop and the heat transfer rate of full-scale heat exchanger matrix are calculated. In the calculation, the aero-thermal performance of each unitary cell of the heat exchanger matrix was evaluated using correlations of the Fanning friction factor f and the Nusselt number Nu, which were calculated by unitary-cell CFD model.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.461-470
• /
• 2014

This paper presents a probabilistic power flow (PPF) analysis method for distribution network incorporating the randomness and correlation of photovoltaic (PV) generation. Based on the multivariate kernel density estimation theory, the probabilistic model of PV generation is proposed without any assumption of theoretical parametric distribution, which can accurately capture not only the randomness but also the correlation of PV resources at adjacent locations. The PPF method is developed by combining the proposed PV model and Monte Carlo technique to evaluate the influence of the randomness and correlation of PV generation on the performance of distribution networks. The historical power output data of three neighboring PV generators in Oregon, USA, and 34-bus/69-bus radial distribution networks are used to demonstrate the correctness, effectiveness, and application of the proposed PV model and PPF method.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.339-351
• /
• 2020

Earthquakes are natural disasters that cause serious social disruptions and economic losses. In particular, they have a significant impact on critical lifeline infrastructure such as urban water transmission networks. Therefore, it is important to predict network performance and provide an alternative that minimizes the damage by considering the factors affecting lifeline structures. This paper proposes a probabilistic reliability approach for post-hazard flow analysis of a water transmission network according to earthquake magnitude, pipeline deterioration, and interdependency between pumping plants and 154 kV substations. The model is composed of the following three phases: (1) generation of input ground motion considering spatial correlation, (2) updating the revised nodal demands, and (3) calculation of available nodal demands. Accordingly, a computer code was developed to perform the hydraulic analysis and numerical modelling of water facilities. For numerical simulation, an actual water transmission network was considered and the epicenter was determined from historical earthquake data. To evaluate the network performance, flow-based performance indicators such as system serviceability, nodal serviceability, and mean normal status rate were introduced. The results from the proposed approach quantitatively show that the water network is significantly affected by not only the magnitude of the earthquake but the interdependency and pipeline deterioration.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4776-4797
• /
• 2022

In the one-dimensional thermal-hydraulic (TH) codes, a subcooled boiling model to predict the void fraction profiles in a vertical channel consists of wall heat flux partitioning, the vapor condensation rate, the bubbly-to-slug flow transition criterion, and drift-flux models. Model performance has been investigated in detail, and necessary refinements have been incorporated into the Safety and Performance Analysis Code (SPACE) developed by the Korean nuclear industry for the safety analysis of pressurized water reactors (PWRs). The necessary refinements to models related to pumping factor, net vapor generation (NVG), vapor condensation, and drift-flux velocity were investigated in this study. In particular, a new NVG empirical correlation was also developed using artificial neural network (ANN) techniques. Simulations of a series of subcooled flow boiling experiments at pressures ranging from 1 to 149.9 bar were performed with the refined SPACE code, and reasonable agreement with the experimental data for the void fraction in the vertical channel was obtained. From the root-mean-square (RMS) error analysis for the predicted void fraction in the subcooled boiling region, the results with the refined SPACE code produce the best predictions for the entire pressure range compared to those using the original SPACE and RELAP5 codes.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2196-2207
• /
• 2017

This paper presents a two-stage market auction model in a pool-based electricity market, which explicitly takes into account the system network security. The security network-constrained market auction model considers the use of corrective control to yield economically efficient actions in the post-contingency state, while ensuring a certain security level. Under this framework, the proposed model shows not only for quantifying the correlation between secure system operation and efficient market operation, but also for providing transparent information on the pricing system security for market participants. The two-stage market auction procedure is formulated using Benders decomposition (BD). In the first stage, the market participants bid in the market for maximizing their profit, and the independent system operator (ISO) clears the market based on social welfare maximization. System network constraints incorporating post-contingency control actions are described in the second stage of the market auction procedure. The market solutions, along with the BD, yield nodal spot prices (NSPs) and nodal congestion prices (NCPs) as byproducts of the proposed two-stage market auction model. Two benchmark systems are used to test and demonstrate the effectiveness of the proposed model.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.263-272
• /
• 2016

모듈러 제품 설계는 유연한 제품 수정, 제품 개발 및 생산 리드타임 감소, 제품의 다양성 증대와 같은 많은 장점들이 있다. 모듈러 제품 설계의 목적은 여러 개의 모듈들로 구성된 제품의 아키텍쳐를 효율적으로 개발하는 것인데, 이들 모듈들은 컴포넌트들 간 물리적, 기능적 상호관계 분석을 토대로 컴포넌트들 간의 유사성을 최대화함으로써 만들어 질 수 있다. 본 연구에서는 모듈러 제품 설계의 핵심 작업인 모듈화를 위하여 3개 단계로 이뤄진 체계적인 절차를 제시하고자 한다. 첫 번째 단계는 컴포넌트들 간 물리적, 기능적 상호관계 분석을 통한 컴포넌트들 간 상관 관계 매트릭스를 구성하는 것이고, 두 번째 단계는 컴포넌트들 간 상관 관계를 최대화하는 컴포넌트들의 군집들을 찾아내기 위하여 네트워크 흐름으로 모델링하는 것이다. 마지막으로 세 번째 단계에서는 선형 계획 모형인 네트워크 흐름 모델을 풀어서 컴포넌트들의 군집들을 찾아내고 이들을 모듈화 하는 것이다. 본 연구에서 제시한 절차의 이해와 실제 적용을 위하여 진공 청소기 모듈화 사례에 적용해 보고 절차의 타당성을 보여준다.