• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.475-480
• /
• 2001

Sensing soil organic matter is crucial for precision farming and environment friendly agriculture. Near infra-red(NIR) was utilized to measure the soil organic matter. Multivariate calibration methods, including stepwise multiple linear regression(MLR), principal components recession(PCR) and partial least squares regression(PLS), were applied to soil spectral reflectance data to predict the organic matter content. The effect of soil particle size and water content was studied. The range of soil organic matter contents was from 0.5 to 11%. Near infrared (NIR) region from 700 to 2,500nm was applied. For uniform soil particle size, result had good correlation (R$\^$2/ = 0.984, standard error of prediction= 0.596). The effect of soil particle size could be eliminated with 1st order derivative of the NIR signal. However. moist soil had a little lower correlation. R$\^$2/ was 0.95 and standard error of prediction was 0.94% using the PLS method. The results showed the possibility of soil organic matter measurement using NIR reflectance on the field.

• Korean Journal of Biological Psychiatry
• /
• 제22권3호
• /
• pp.118-127
• /
• 2015

Objectives Standardization of head size is essential for the volume study. Cortical thickness analyses are increasingly being used in many fields of neuroscience. However, it is not established whether head size correction should be done for thickness study. Methods Using the Open Access Series of Imaging Studies data, we determined cortical thickness of 316 cognitively normal participants aged 18-94 with FreeSurfer. The association between head size and cortical thickness of whole cortical mantle and in each lobe among age tertile groups was assessed. Estimated total intracranial volume (eTIV) was calculated for determining head size. Results Across all participants, cortical thickness in whole brain except some areas in cingulate and insula decreased with aging. eTIV had positive correlation with the thickness of frontal, parietal, occipital and whole brain areas. However, the age effect was not shown in whole brain of the first tertile group and in cingulate areas of the third tertile group. eTIV had negative correlation with the thickness of cingulate in the third tertile group. Gender effects were shown in some areas in third tertile group, but it would be due to difference of head size. Conclusions These findings suggest that head size standardization might be done especially in older population and in studies of paralimbic areas.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제55권6호
• /
• pp.127-133
• /
• 2013

The purpose of this study was to investigate maximum and minimum grain size which eroded by wind according to soil and wind conditions, such as top soil water content, roughness, land slope, wind velocity and proportion of grain size under 0.84mm. For performing this study, portable wind erosion tunnel was designed and utilized during field test, which facilitated measuring actual wind erosions under artificially controlled wind conditions. In the result, maximum, minimum grain size had strong negative correlation with roughness while weak positive correlation with wind velocity. Also, Slope which means the effect of gravity also influence grain size erodible by winds. Based on these results, regression equations were suggested for predicting maximum and minimum grain sizes by using multiple linear regression analysis from SPSS 20.0. The equation for maximum grain size erodible by winds showed a good agreement with the observed data with $R^2$=0.896. Other equation for minimum grain size had $R^2$=0.777.

• Restorative Dentistry and Endodontics
• /
• 제49권1호
• /
• pp.3.1-3.8
• /
• 2024

This article is a narrative review that discusses the recommended sample size requirements to design a pilot study to assess the reliability of a questionnaire. A list of various sample size tables that are based on the kappa agreement test, intra-class correlation test and Cronbach's alpha test has been compiled together. For all calculations, type I error (alpha) was set at a maximum value of 0.05, and power was set at a minimum value of 80.0%. For the kappa agreement test, intra-class correlation test, and Cronbach's alpha test, the recommended minimum sample size requirement based on the ideal effect sizes shall be at least 15, 22, and 24 subjects respectively. By making allowances for a non-response rate of 20.0%, a minimum sample size of 30 respondents will be sufficient to assess the reliability of the questionnaire. The clear guideline of minimum sample size requirement for the pilot study to assess the reliability of a questionnaire is discussed and this will ease researchers in preparation for the pilot study. This study provides justification for a minimum requirement of a sample size of 30 respondents specifically to test the reliability of a questionnaire.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.545-553
• /
• 2020

Although networking behavior is an effective job search method to students, far too little attention has been paid to mechanisms explaining the antecedents and networking behavior. The goal of this study was to demonstrate the effect of the HEXACO personality dimensions on graduated students' job search networking behavior through their network size. A survey of 773 participants was conducted to assess personality traits, network size, and networking behavior. All constructs in the study were measured by 5-point Likert scales. This study employed a structural equation model to examine the proposed conceptual model and the correlations among variables. Results showed that the personality of emotionality negatively influence students' network size, while extraversion and agreeableness are positively associated with the scope of their social network. Second, the findings confirmed that network size is directly related to the level of looking-for job behavior, particularly networking behavior. Finally, our results explored that network size played the mediating effect on how personality traits affect networking behavior. These findings suggest that network size is a dynamic mechanism that helps to understand the correlation between personality traits and job search networking behavior. The theoretical and practical implication of the study, as well as the future research direction were discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제27권3호
• /
• pp.326-333
• /
• 2003

In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

• The Journal of Fisheries Business Administration
• /
• 제42권2호
• /
• pp.1-14
• /
• 2011

We try to find the determinants of fisheries firms' capital structure during the years from 1992 to 2007 in this paper. We also have a comparative analysis of capital raising behavior in pre and post-IMF financial crisis. Regression analysis is used for this empirical study. Dependent variable is leverage ratio and independent variables are firm size, operating risk, proportion of tangible asset, non-debt tax shield effect, sales growth ratio, profitability and dummy variable. We compared the characteristics of fisheries industry with that of manufacturing industy. The determinants of fisheries firms' capital structure and correlation between pre and post-IMF financial crisis are roughly same as the hypothses except a little difference. As a peculiar difference, corrlation between fisheries firms' operating risk and leverage ratio is (+) in the pre-IMF financial crisis, but (-) in the post-IMF financial crisis. Proportion of tangible asset has a (+) correlation with leverage ratio in pre and post-IMF financial crisis, but in case of manufacturing industy, (-) correlation shows in the pre-IMF financial crisis. Because, in the pre-IMF financial crisis, high proportion of tangible asset doesn't play a role of a collateral, but only increase the bankruptcy probability. Non-debt tax shield effect and leverage ratio have (-) correlation in all industry and all period, but only (+) correlation in case of fisheries industry in the pre-IMF financial crisis. Sales growth ratio has no significant relationship with leverage ratio in fisheries industry, and this is not coincide with our hypothsis. We have a limitation of the sample size of fisheries firms and sample period in this study. Further study is required to classify the fisheries industry with in-shore fisheries, deep sea fisheries and cold storage industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.551-554
• /
• 2005

The method of the reduction of the automotive induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, When the Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. Thus Normalized FXLMS algorithm was developed to improve the control performance under the rapid acceleration. The advantage of Normalized FXLMS algorithm is that the step size is no longer constant. Instead, it varies with time. But there is one additional practical difficulty that can arise when a nonstationary input is used. If the input is zero for consecutive samples, then the step size becomes unbounded. So, in order to solve this problem. the Correlation FXLMS algorithm was developed. The Correlation FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Correlation FXLMS Is presented in comparison with that of the other FXLMS algorithms based on computer simulations.

• The Journal of Industrial Distribution & Business
• /
• 제12권11호
• /
• pp.17-31
• /
• 2021

Purpose: Despite the fact that face (i.e. Chemyon) is deeply-rooted in Korean culture and significantly affects the behavior of Korean people, the effect of face on leisure consumers' consumption behavior has only reported mixed findings, that is, significant and/or insignificant face effects have been reported. It is necessary to integrate prior research findings, and comprehensively examine the effect of face on leisure consumers' consumption behavior. The purpose of this study was to investigate the effect (i.e. effect size, and moderating variables) of face on leisure consumers' consumption behavior through meta-analysis. Research design, data and methodology: Among 1,019 face-related academic studies, retrieved from the academic research information services (RISS), 34 studies and 300 cases examining the effect of face on leisure consumers' consumption behavior were finally included for meta-analysis. Face measured as face sensitivity and/or a face sensitivity sub-component (shame-consciousness, formality-consciousness, and other-consciousness) were integrated in the meta-analysis. Leisure consumers' consumption behavior was classified as antecedents of purchase (overall conspicuous consumption tendency, overall symbolic consumption tendency, personality, high price, high quality, brand seeking, fashion seeking, enjoyment, other person (interpersonal) consideration, position, reference group, and attitude), purchase (purchase intention, unplanned purchase, purchase, and expenditure), and post-purchase (satisfaction, repurchase, and post-purchase). The data used in the meta-analysis was comprised of correlation coefficients, and the meta-analysis was performed using the R-program. Results: The overall mean effect size of face on leisure consumers' consumption behavior was .248. It was found that the effect size was the largest in the order of shame-consciousness face, formality-consciousness face, and other-consciousness face. Among the types of leisure consumers' consumption behavior categorized as dependent variables, the effect size was found to be largest in the order of position, attitude, reference group, post-purchase behavior, brand seeking, personality, trend seeking, etc. In addition, it was found that the leisure types moderated the effect size of face on leisure consumers' consumption behavior. The effect size was found to be largest in the order of skin diving, baseball, various leisure participation, dance, gambling, golf, etc. Conclusions: Face moderately or significantly influence leisure consumers' consumption behavior.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제2권5호
• /
• pp.11-22
• /
• 1994

The pupose of this study is to measure droplet size and velocity simultaneously for a transient diesel fuel spray in a quiescent chamber at atmospheric temperature and pressure. Generally, diesel combustion phenomena is mainly governed by characteristics of injection system and fuel spray. Therefore we need to clarify these characteristics for developing more economical diesel systems. In this study, correlation between droplet size and velocity was measured at downstream distance from nozzle. Governing parameters are pump speed and fuel quantity for the detailed nature in this transient diesel fuel spray. It is observed effect to the droplet size and velocity distribution. Velocity(peak, mean, rms), number density and droplet size were investigated simulaneously using PDA in the spray. Various results are presented to illustrate the effects of operation factors and correlation between the droplet diameter and velocity.