• Computers and Concrete
• /
• v.17 no.5
• /
• pp.613-628
• /
• 2016

In this study, the influence of coarse aggregate size and type on chloride penetration of concrete was investigated, and the grey correlation analysis was applied to find the key influencing factor. Furthermore, the proposed 6-10-1 artificial neural network (ANN) model was constructed, and performed under the MATLAB program. Training, testing and validation of the model stages were performed using 81 experiment data sets. The results show that the aggregate type has less effect on the concrete permeability, compared with the size effect. For concrete with a lower w/b, the coarse aggregate with a larger particle size should be chose, however, for concrete with a higher w/c, the aggregate with a grading of 5-20 mm is preferred, too large or too small aggregates are adverse to concrete chloride diffusivity. A new idea for the optimum selection of aggregate to prepare concrete with a low penetration is provided. Moreover, the ANN model predicted values are compared with actual test results, and the average relative error of prediction is found to be 5.62%. ANN procedure provides guidelines to select appropriate coarse aggregate for required chloride penetration of concrete and will reduce number of trial and error, save cost and time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.1150-1163
• /
• 2016

This study makes use of meta-analysis to statistically integrate the quantitative results of individual research on the influence of fashion product attributes on purchase; in addition, this study utilizes the effect sizes of correlation coefficients. This study was based on 24 individual studies from January 2000 to March 2015. The meta-analysis analyzed 91 effect sizes and 24 studies and calculated the correlation coefficient effect sizes. A random effect model was employed for meta-analysis because the results for the homogeneity test indicated that the effect sizes of each research were heterogeneous. The analysis results are as follows. First, when the total effect sizes of the fashion product attributes that influence clothing purchase decisions were calculated as .256; this indicated that the effect size is slightly below the mid-sized level. Second, upon examining the effect sizes of the categorized fashion product attributes, the intrinsic attributes yielded .222, extrinsic factors yielded .235, and the compiled attributes yielded .420; this demonstrated that the compiled attributes have a larger effect size than individual attributes. Third, when they were measured by the characteristics of study targets, they were larger for a mixed-gender group than women as well as for ordinary citizens than university students. When the effect sizes were measured based on the characteristics of fashion products as suggested in the study, there were significant differences with respect to sportswear, followed by SPA brand clothing, general clothing, fashion accessories, and designer clothing. The cases where the clothing were purchased in non-retail stores were found to have a slightly larger effect size than those of offline retail stores when the effect sizes were measured based on purchase routes; however, the difference was not statistically significant. Next, an investigation of the trend of effect sizes based on published year via the meta regression analysis indicated slightly larger effect sizes as shown in more recent publications, but this was not statistically significant.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.9-17
• /
• 2001

The floc characteristics of base paper stock for coating by the retention aid system consisting of polyacrylamide (high molecular weight low charge density, HMLC) and PEI without and with anionic inorganic oxide (IO) were investigated under various shear conditions of MDDA (modified dynamic drainage analyzer). The floc size was increased with cationic electrolytes dosage whatever inorganic oxide is applied or not. The effect of inorganic oxide on the floc size showed the different result between PAM and PEI. The smaller floc was obtained by PAM without inorganic oxide, but larger floc was obtained by PAM with inorganic oxide. However, the effect of shear force was not observed. Floc formation index was decreased by the addition of cationic electrolytes with or without inorganic oxide. Floc formation index had better correlation format formation index than floc size. The relationships between wet web permeability and mat air permeability showed the significant linear correlation ($R^2$=0.97~0.98) for HML PAM and PEI. Floc formation index gave more useful information than the retention measurement when the performance of retention aids is evaluated at the laboratory before applying at the paper mill.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.396-405
• /
• 2002

An experimental study on counter-current flow limitation phenomena in narrow annular passages was carried out The gap sizes tested were 1, 2 and 3 mm. This is very small compared with the outer diameter of the annular passage, 500 mm. It was visually observed that a CCFL might occur in some part of the periphery while the other part is remained in a counter current flow pattern. That is, non-uniform behaviour of fluids due 4o a 2-dimensional effect appear in a large diameter facility. Because of this non-uniformity, a CCFL is defined in the present work as the situation where net water accumulation is sustained. That is, some amount of water should not be allowed to penetrate the gap and accumulate over the gap at CCFL criterion. The measured data are presented in the form of Wallis＇type correlation with characteristic length of gap size. It was found that the present correlation is in good agreement with other empirical correlation based on measurements whose test section diameter is close and the gap size is much larger than that of the present test section.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.4
• /
• pp.259-272
• /
• 2022

Objectives: To identify the factors influencing the turnover intention of registered South Korean dental hygienists and analyze the effect sizes. Methods: Overall, 54 studies based on criteria of PICO from 1 January 2000 to 11 January 2022 were extracted. The factors related to turnover intention were applied to the ecological system theory and categorized. Subsequently, the effect size of the correlations was comprehensively meta-analyzed by dividing it into protective and risk factors depending on the negative or positive correlation direction. Results: For the overall effect size, the protective factor (ES_r=-0.458) was higher than the risk factor (ES_r=0.352). In the protective factors, organizational commitment and perceived organizational support belonging to the microsystem yielded the largest effect size. Furthermore, as for risk factors, burnout, job stress, work harassment, role conflict, and emotional labor belonging to the microsystem showed a moderate effect size. Conclusions: Factors belonging to the microsystem demonstrated a large effect size in both protection and risk factors for dental hygienists' turnover intention. Additionally, the factor showing the largest effect size was protective factor categorized into a microsystem.

• Computers and Concrete
• /
• v.28 no.5
• /
• pp.521-532
• /
• 2021

Present paper focuses on the modeling of size effect on the compressive strength of normal concrete with the application of Discrete Element Method (DEM). Test specimens with different size and shape were cast and uniaxial compressive strength test was performed on each sample. Five different concrete mixes were used, all belonging to a different normal strength concrete class (C20/25, C30/37, C35/45, C45/55, and C50/60). The numerical simulations were carried out by using the PFC 5 software, which applies rigid spheres and contacts between them to model the material. DEM modeling of size effect could be advantageous because the development of micro-cracks in the material can be observed and the failure mode can be visualized. The series of experiments were repeated with the model after calibration. The relationship of the parallel bond strength of the contacts and the laboratory compressive strength test was analyzed by aiming to determine a relation between the compressive strength and the bond strength of different sized models. An equation was derived based on Bazant's size effect law to estimate the parallel bond strength of differently sized specimens. The parameters of the equation were optimized based on measurement data using nonlinear least-squares method with SSE (sum of squared errors) objective function. The laboratory test results showed a good agreement with the literature data (compressive strength is decreasing with the increase of the size of the specimen regardless of the shape). The derived estimation models showed strong correlation with the measurement data. The results indicated that the size effect is stronger on concretes with lower strength class due to the higher level of inhomogeneity of the material. It was observed that size effect is more significant on cube specimens than on cylinder samples, which can be caused by the side ratios of the specimens and the size of the purely compressed zone. A limit value for the minimum size of DE model for cubes and cylinder was determined, above which the size effect on compressive strength can be neglected within the investigated size range. The relationship of model size (particle number) and computational time was analyzed and a method to decrease the computational time (number of iterations) of material genesis is proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.990-996
• /
• 2005

The effect of diets varying in level and source of nitrogen (N) and fermentable organic matter on dynamic characteristics of microbial populations in rumen liquor and their impact on substrate fermentation in vitro was studied. The diets tested were straw alone, straw+concentrate mixture and straw+urea molasses mineral block (UMMB) lick. The same diets were taken as substrates and tested on each inoculum collected from the diets. Diet had no effect on the amino acid (AA) composition of either bacteria or protozoa. Differences among the diets in intake, source of N and OM affected bacterial and protozoal characteristics in the rumen. Upper asymptote of gas production (Y$\alpha$) had a higher correlation with bacterial pool size and production rate than with protozoal pool size and production rate. Among the parameters of the gas production model, Y$\alpha$ and lag time in total gas has showed significant (p<0.01) correlation with bacterial characteristics. Though the rate constant of gas production significantly differed (p<0.01) between diet and type of straw, it was least influenced by the microbial characteristics. The regression coefficient of diet and type of straw for Y$\alpha$ indicated that the effect of diet on Y$\alpha$ was threefold higher than that of the straw. As microbial characteristics showed higher correlation with Y$\alpha$, and diet had more influence on the microbial characteristics, gas production on a straw diet could be used effectively to understand the microbial characteristics.

• Journal of Korea Trade
• /
• v.26 no.1
• /
• pp.99-112
• /
• 2022

Purpose - This paper empirically investigates via a spatial lag model from the perspective of space economy to find the influencing factors of South Korea's OFDI along with 60 countries. Design/methodology - In the study of regional economic phenomena, we must first test the corresponding spatial correlation, and on this basis, complete the construction of the spatial model. For the target research object, after testing the spatial correlation, if there is spatial correlation, a spatial measurement model is needed. This paper uses the global Moran's I index for calculation. Based on the characteristics and research needs of the research object, this paper selects the spatial lag model to verify the existence of the spatial effect and factors affecting OFDI. Findings - Our results show that export scale, infrastructure, technology level, political stability, resource endowment, market size, distance and labor cost have a certain impact on Korea's OFDI, but at present the distance and market size factors are the most important influencing factors for South Korea's OFDI, The technical level and political stability have little effect on South Korea's OFDI, and are not main factors determining South Korea's OFDI. Originality/value - Through spatial measurement verification, it was found that the spatial effect has a significant impact on OFDI, along with more than 60 countries. On this basis, relevant suggestions are put forward, which have strong practical significance for South Korea's OFDI to achieve healthy and sustainable development.

• Wind and Structures
• /
• v.36 no.1
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.196-201
• /
• 1997

This study was carried out to understand the effect of low temperature treatment and seedling size on growth and bolting in Angeljca gjgas. Bolting rate increased as period of low temperature increased and bolting rate of control was lower than that of low temperature treatment. In low temperature treatment with seedling size, the smaller seedling size, the higher bolting rate. Period from transplanting to bolting was reduced with low temperature treatment extended and large seedling. The plant height, position of bolting leaf and number of developing leaf were decreased with low temperature treatment extended and large seedling, respectively, There was a highly significant negative correlation between bolting rate and number of developed leaves before bolting and number of developed leaves in growth to first bolting but positive correlation in late growth, respectively.