• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.337-350
• /
• 2006

The characteristics of neighborhood correlation images for change detection were explored at different spatial resolution scales. Bi-temporal QuickBird datasets of Las Vegas, NV were used for the high spatial resolution image analysis, while bi-temporal Landsat $TM/ETM^{+}$ datasets of Suwon, South Korea were used for the mid spatial resolution analysis. The neighborhood correlation images consisting of three variables (correlation, slope, and intercept) were evaluated and compared between the two scales for change detection. The neighborhood correlation images created using the Landsat datasets resulted in somewhat different patterns from those using the QuickBird high spatial resolution imagery due to several reasons such as the impact of mixed pixels. Then, automated binary change detection was also performed using the single and multiple neighborhood correlation image variables for both spatial resolution image scales.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3475-3489
• /
• 2014

Here we present a simple flame detection method for an infrared (IR) thermal camera based real-time fire surveillance digital signal processor (DSP) system. Infrared thermal cameras are especially advantageous for unattended fire surveillance. All-weather monitoring is possible, regardless of illumination and climate conditions, and the data quantity to be processed is one-third that of color videos. Conventional IR camera-based fire detection methods used mainly pixel-based temporal correlation functions. In the temporal correlation function-based methods, temporal changes in pixel intensity generated by the irregular motion and spreading of the flame pixels are measured using correlation functions. The correlation values of non-flame regions are uniform, but the flame regions have irregular temporal correlation values. To satisfy the requirement of early detection, all fire detection techniques should be practically applied within a very short period of time. The conventional pixel-based correlation function is computationally intensive. In this paper, we propose an IR camera-based simple flame detection algorithm optimized with a compact embedded DSP system to achieve early detection. To reduce the computational load, block-based calculations are used to select the candidate flame region and measure the temporal motion of flames. These functions are used together to obtain the early flame detection algorithm. The proposed simple algorithm was tested to verify the required function and performance in real-time using IR test videos and a real-time DSP system. The findings indicated that the system detected the flames within 5 to 20 seconds, and had a correct flame detection ratio of 100% with an acceptable false detection ratio in video sequence level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.541-550
• /
• 2005

In this paper, we address the derivation of joint distributions and correlation coefficients for four pairs of statistics used commonly in a number of signal detection schemes. The upper and lower bounds of the correlation coefficients are obtained, and interesting relationships between the correlation coefficients are derived. Explicit values of the correlation coefficients are given in the form of tables and figures for easy reference. The results in this paper should be useful in comparing various detection statistics.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.84-89
• /
• 2003

Water leak is one of topics with great concern in Korea and many other countries, because of decreasing water supplies and the deterioration of old pipeworks. Correlation techniques have been widely used in leak detection of water pipes, which allow to locate a leak point based on the correlation of leak noise at two sites along water pipes. In this study, both the cross-correlation method and the conventional arrival time difference method are applied in order to analyze and to locate a leak point of a water pipe. In experiment, a 150 m of whole length waterwork pipeline system was constructed in a ground, and several types of leak noise were installed on the pipeline in order to control leak condition. Both the cross-correlation technique and the arrival time difference method showed favorable results at leak detection with the experimental pipeline system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.633-641
• /
• 2005

In this paper, we address the derivation of joint distributions and correlation coefficients for three pairs of statistics used commonly in a number of signal detection schemes. The upper and lower bounds of the correlation coefficients for the three pairs are obtained, and interesting relationships between the correlation coefficients are derived. Explicit values of the correlation coefficients evaluated for some meaningful distributions are given in the form of tables and figures for easy reference. The results in this paper should be useful in comparing various detection statistics.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.445-452
• /
• 2008

Preliminary results are reported on ship detection using coherence images computed from cross-correlating images of multi-look-processed dual-polarization data (HH and HV) of ENVISAT ASAR. The traditional techniques of ship detection by radars such as CFAR (Constant False Alarm Rate) rely on the amplitude data, and therefore the detection tends to become difficult when the amplitudes of ships images are at similar level as the mean amplitude of surrounding sea clutter. The proposed method utilizes the property that the multi-look images of ships are correlated with each other. Because the inter-look images of sea surface are covered by uncorrelated speckle, cross-correlation of multi-look images yields the different degrees of coherence between the images and water. In this paper, the polarimetric information of ships, land and intertidal zone are first compared based on the cross-correlation between HH and HV images, In the next step, we examine the technique when the dual-polarization data are split into two multi-look images, It was shown that the inter-look cross-correlation method could be applicable in the performance improvement of small ship detection and the land masking, It was also found that a simple combination of coherence images from each co-polarised (HH) inter-look and cross-polarised (HV) inter-look data can provide much higher target-detection possibilities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.672-679
• /
• 2006

Cognitive radio, which is designed to dynamically adapt its transmission to the environments, is believed to be one of the fundamental techniques for future spectrum utilization. As the first step of cognitive radio, spectrum sensing is treated as the most important technique, through which cognition is well explained. In this paper, we propose a spectral correlation based detection method for spectrum sensing. An unlicensed secondary user system operating in TV broadcast bands is taken as an example. Based on the cyclostationarity of communication signals, spectral correlation function is used to minimize the effect of random noise and interference. Energy measurement and peak detection based criteria are proposed. Simulation results show that the proposed detection method outperforms the energy detection and is more suitable for spectrum sensing in cognitive radios.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.262-265
• /
• 2007

Preliminary results are reported on ship detection using coherence images computed from cross-correlating images of multi-look-processed dual-polarization data (HH and HV) of ENVISAT ASAR. The traditional techniques of ship detection by radars such as CFAR (Constant False Alarm Rate) rely on the amplitude data, and therefore the detection tends to become difficult when the amplitudes of ships images are at similar level as the mean amplitude of surrounding sea clutter. The proposed method utilizes the property that the multi-look images of ships are correlated with each other. Because the inter-look images of sea surface are covered by uncorrelated speckle, cross-correlation of multi-look images yields the different degrees of coherence between the images and water. The polarimetric information of ships, land and intertidal zone are first compared based on the cross-correlation between HH and HV. In the next step, we examine the technique when the dual-polarization data are split into two multi-look Images.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.57-64
• /
• 2020

In this paper, we propose an scalable re-detection for correlation filter in visual tracking. In real world, there are lots of target disappearances and reappearances during tracking, thus failure detection and re-detection methods are needed. One of the important point for re-detection is that a searching area must be large enough to find the missing target. For robust visual tracking, we adopt kernelized correlation filter as a baseline. Correlation filters have been extensively studied for visual object tracking in recent years. However conventional correlation filters detect the target in the same size area with the trained filter which is only 2 to 3 times larger than the target. When the target is disappeared for a long time, we need to search a wide area to re-detect the target. Proposed algorithm can search the target in a scalable area, hence the searching area is expanded by 2% in every frame from the target loss. Four datasets are used for experiments and both qualitative and quantitative results are shown in this paper. Our algorithm succeed the target re-detection in challenging datasets while conventional correlation filter fails.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.3-10
• /
• 2014

The synchronization signal in Long Term Evolution (LTE) systems contains the primary synchronization signal (PSS) and the secondary synchronization signal (SSS), and the overall synchronization performance is dominated by PSS detection. In this paper, we propose a PSS detection scheme employing three partial correlation based PSS detectors with different partial correlation lengths, in which calculated partial correlation values are reused in order to reduce computational complexity. A coherent selection scheme using tentative frequency offsets is also proposed to select one reliable result from outputs of partial correlation based PSS detectors. It is shown through computer simulation that the proposed scheme can have a robust detection performance in wide range of frequency offsets.