• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.5
• /
• pp.423-433
• /
• 2014

This study examined the short-term variability of $CO_2$ concentrations measured at the Gosan site ($33^{\circ}17^{\prime}N$, $126^{\circ}10^{\prime}E$) in Jeju, Korea for the last 9 years from 2002 to 2010. The weekly distribution shows higher $CO_2$ concentrations during weekends than weekdays which implies the impact of local emissions because Jeju Island is one of the top tourist attraction in Korea. In diurnal variation, $CO_2$ concentration reached the maximum at 6 am and the minimum at 1 pm. The high $CO_2$ concentrations were mostly associated with lower wind speed (below 4 m/s) and easterlies, which was typical of summer night. In other seasons, however, the high concentrations were encountered under strong westerlies (8~16 m/s), which implies the influence of Chinese outflows. $CO_2$ concentrations were found to be highly correlated with meteorological parameters including wind speed, temperature, humidity, and solar radiation except for winter.

• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.1-20
• /
• 1993

In this study, laboratory direct shear tests on 37 core specimens of gneiss were performed to examine the characteristics of shear behavior on fractures by using a portable direct shear box. The multi-stage shear testing method was used and normal stress applied to specimens ranges from 5.60 to $25.67kg/\textrm{cm}^2$. On the basis of test results, the empirical equations for the shear strength on fractures were suggested. The methanical parameters that can influence the shear behavior were derived and compared between each parameter. The values of shear stiffness have a trend showing rapid increase with the increase of normal stress and joint roughness coeffident, and the average value of secant shear stiffness for all specimens is about $110.68kg/\textrm{cm}^3$ under the range of normal stress applied in this test In addition, the relationship between the length of specimen and shear stiffness is inversely correlated due to the size effect. Therefore, even the specimens with the same joint roughness coeffident show the trend of decreasing shear stiffness in case of the specimens being the longer length.

• Water Engineering Research
• /
• v.6 no.2
• /
• pp.39-48
• /
• 2005

The Brazos River is one of the longest rivers contained entirely in the state of Texas, flowing over 700 miles from northwest Texas to the Gulf of Mexico. Today, the Brazos River Authority and Texas Commission on Environmental Quality interest in drought protection plan, waterpower project, and allowing the appropriation of water system-wide and water right within the Brazos River Basin to meet water needs of customers like farmers and local civilians in the future. Especially, this purpose of this paper primarily intended to provide the data for the engineering guidelines and make easily geological mapping tool. In the Brazos River basin, many stream-flow gage station sites are not working, and they can not provide stream-flow data sets enough for development of the Probable Maximum Flood (PMF) for use in the evaluation of proposed and existing dams and other impounding structures. Integrated GIS-Spatial Interpolation (GIS-SI) tool are composed of two parts; (1) extended GIS technique (new making interface for hydrological regionalization parameters plus classical GIS mapping skills), (2) Spatial Interpolation technique using weighting factors from kriging method. They are obtained from the relationship among location and elevation of geological watershed and existing stream-flow datasets. GIS-SI technique is easily used to compute parameters which get drainage areas, mean daily/monthly/annual precipitation, and weighted values. Also, they are independent variables of multiple linear regressions for simulation at un gaged stream-flow sites. In this study, GIS-SI technique is applied to the Brazos river basin in Texas. By assuming the ungaged flow at the sites of Palo Pinto, Bryan and Needville, the simulated daily/monthly/annual time series are compared with observed time series. The simulated daily/monthly/annual time series are highly correlated with and well fitted to the observed times series.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.905-909
• /
• 2010

Two sets of data on carcass traits and beef cut parameters were used to investigate the relationships between carcass and beef cut measurements, which can be used to make predictions of retail cut percentages. One set had a total of 1,141 measurements of Hanwoo cattle of three different sex origins, which were slaughtered in an abattoir located at the National Institute of Animal Science, RDA, Korea from 1996 to 2008. To develop prediction models for retail cut percentage with higher accuracies than the current model, another set consisting of a total of 13,389 records of carcass and beef cut traits were collected from 30 abattoirs and butcheries in Korea from 2008 to 2009. Bulls yielded heavier and leaner carcasses than steers. High correlation coefficients were estimated between amount of body fat and percent retail cut (-0.82) as well as between back fat thickness (BF) and percent retail cut (-0.62). The amount of retail cut, however, was highly correlated with body weight before slaughter (BW, 0.95) or with cold carcass weight (CWT, 0.94). Relationships between percent retail cut and measurable beef yield traits, BF, loin eye area (LEA) or CWT varied by sex class, which must be considered for development of a prediction model with high accuracy. Models of data for all breeds and sexes fit the effects of breed, sex, and interaction of abattoir by butchers, whereas models of data for each breed and sex fit the effect of interaction of abattoir by butcher only. Due to possible future changes in back fat control, we performed a log transformation of BF. Our new models fit better than the currently used model.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.107.2-107.2
• /
• 2012

We used the electrophoretic deposition (EPD) process to fabricate a glass composite and investigated the EPD parameters to find the optimum deposition time by understanding the relationship among the process parameters of zeta potential (ZP), pH, deposition yield and saturation point. A binder and a dispersing agent were mixed properly with glass frit ($0.2{\sim}25{\mu}m$, d50=$8.77{\mu}m$) in an ethyl alcohol medium for the preparation of the slurry. The pH and ZP were in an inverse relationship to each other due to the generation of $H_3O^+$ ions with the addition of the dispersing agent in the slurry. The acidic nature of the dispersing agent was resulted in a decrease of the pH and an increase of the ZP. Otherwise, the pH increased with the addition of the glass frit in the slurry because $H_3O^+$ ions were absorbed on the glass frit. Therefore, the $OH^-$ ions correspondingly increased. The saturation point of EPD was strongly correlated with the variation of the pH in the slurry; this is caused by a chemical reaction between the ethyl alcohol and the ions that make up the glass frit. An adjustment of the pH variation and the saturation point in the slurry can be established with respect to the optimum deposition time in the slurry.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.5
• /
• pp.41-47
• /
• 2013

Well-graded and dense soils have good engineering properties. Unsaturated soil properties such as shear strength, compressibility and permeability are closely related to the soil-water characteristic curve of the soil. Therefore it is important to study the effects of the coefficient of uniformity and the porosity on the soil-water characteristic curve of the sandy soils, which are also related to the grain size distribution and the density of the soil, respectively. In this study soil-water characteristic curves (SWCCs) for six sandy soil specimens were investigated using Tempe pressure cells. The test data were best-fitted to Fredlund and Xing equation. The obtained fitting parameters and the characteristic points of SWCCs were discussed and correlated with the porosity and the coefficient of uniformity of the specimens. The results show that the smaller the porosity of the specimen becomes, the larger the value of the residual matric suction becomes, whereas the larger the coefficient of uniformity of the specimen becomes, the larger the value of the residual matric suction becomes. Regardless of the coefficient of uniformity, the smaller the porosity of the specimen, the flatter the max. slope of SWCC.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.71-82
• /
• 2008

Survivin is a member of the inhibitors of apoptosis (IAP) family that have been known to inhibit activated caspases in apoptosis. In contrast to most IAP family members, survivin mRNA is expressed during fetal development, is not found in normal adult tissues and is overexpressed again in the cancer. Though survivin expression has been documented in most human cancers, little is known about its expression in OSCC and its potential value as a predictor of cancer survival. The purpose of this study was to investigate survivin expression in OSCC and to evaluate its value as a prognostic marker. We evaluated survivin expressions in cancer lines and OSCC samples and investigated the relationships between survivin expressions and clini-co-pathological parameters including stage, differentiation, proliferation, lymph node metastasis, blood vessel density, and gelatinolytic activity. With immunohistochemistry, we analyzed survivin expression in 38 OSCCs. Patients' clinico-pathological parameters and their survival rate were analyzed to reveal their correlations with Survivin expressions. We cultured oral cancer cell lines and evaluated the correlation between gelatinolytic activities and survivin expressions of them. Survivin protein was observed both in nuclei and cytoplasm of tumor specimens while little or not observed in normal gingival mucosal tissues. Additionally, survivin expressions were correlated with lymph node metastasis, tumor proliferation and survival rate. Survivin expression was observed in 100% of 38 samples of OSCC and its expression levels are statistically associated with the proliferative activity of the tumors, lymph node metastasis and the survival of the patients. Based on these results, survivin is commonly expressed in OSCC and may thus provide valuable prognostic information related with lymph node metastasis, proliferation and survival rate as well as a potential therapeutic target in OSCC.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.217-224
• /
• 2016

Purpose: This study aimed to generate 3-D occlusal curvatures and evaluate the relationship between the occlusal curvatures and mandibular occlusal morphology factors. Methods: Mandibular dental casts from 25 young adult Korean were scanned as a virtual dental models with a 3-D scanner(Scanner S600, Zirkonzahn, Italy). The curve of Spee, curve of Wilson, and Monson's sphere were generated by fitting a circle/sphere to the cusp tips using a least-squares method. The mandibular mesiodistal cusp inclination, buccolingual cusp inclination, and tooth wear parameters were measured on the prepared virtual models using RapidForm2004(INUS technology INC, Seoul, Korea). Wilcoxon signed-rank test was performed to test side difference, and Spearman's rank correlation coefficients were investigated to verify the correlation between occlusal curvatures and correlated factors (a=0.05). Results: The mean radii of curve of Spee were $83.09{\pm}33.94$ in the left side and $79.00{\pm}28.12mm$ in the right side. The mean radii of curve of Wilson were $66.82{\pm}15.87mm$ in the mesial side and $47.87{\pm}9.40mm$ in the distal side with significantly difference between mesiodistal sides(p<0.001). The mean radius of Monson's sphere was $121.85{\pm}47.11mm$. Most of the cusp inclination parameters showed negative correlation for the radius of Monson' sphere(p<0.05). Especially, the buccolingual cusp inclinations in mesial side of molar showed high correlation coefficients among the factors(p<0.05). Conclusion: The radius of Monson's sphere was greater than the classical 4-inch values, and the buccolingual cusp inclinations in mesial side of molar can be considered as one of the main factors correlating with the radius of Monson's sphere.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.279-289
• /
• 1999

This study was conducted to investigate the physical characteristics and risk factors for hyperchol-esterolemia (HC) in Korean. 344 adult men who took the annual health check-ups at D or J hospitals were participated in this cross-sectional study. The subjects were grouped by plasma total cholesterol level in to three groups: normal cholesterolemic (n=139) borderline hypercholesterolemic(n=93) and hypercholesterolemic (n=112) groups. The data of height weight and plasma cholesterol level were col-lected from medical records. Body circumferences(midarm, waist, hip, and thight) skinfold thicknesses (biceps, triceps, subcostal, abdomen, and suprailic), and body composition (fat mass and fat free mass) were measured. Body mass index (BMI) height/weight ratio (HWR) waist/hip circumference ratio (WHR) waist/ thigh circumference ratio (WTR) central skinfold thickenss (CSF) and peripheral skin-fold thickness were calculated. The subjects with HC had significantly higher weight BMI waist cir-cumference skinfold thickness and body fat mass than those of the normal subjects. The relative and attributable risks on HC were 1.61 and 0.17 for obesity (BMI$\geq$25) 1,30 and 0.11 for upper body obesity (WTR$\geq$1.30) and 1.54 and 0.18 for central body obesity (CSF$\geq$95.7). Plasma total cholesterol level was positively correlated with several antropometric parameters: BMI (p<0.001) weight(p<0.001) waist circumference(p<0.001) and skinfold thickness of abdomen (p<0.001) spraillic (p<0.01) triceps(p<0.01) subcostal (p<0.01) and biceps (p<0.05) In conclusion the major influencing factors to plasma cholesterol level was BMI. Among the each physical parameters the circumference of waist the skinfol-d thickness of abdomen and the percentage of body fat were closely related to plasma cholesterol level. The important risk factor for hypercholesterolemia was obesity specially upper body obesity and central body obesity.

• Clinical and Experimental Pediatrics
• /
• v.57 no.4
• /
• pp.171-177
• /
• 2014

Purpose: Eosinophilia is common in premature infants, and its incidence increases with a shorter gestation period. We investigated the clinical significance of eosinophilia in premature infants born at <34 weeks gestation. Methods: We analyzed the medical records of premature infants born at <34 weeks gestation who were admitted to the neonatal intensive care unit at Ewha Womans University Mokdong Hospital between January 2003 and September 2010. Eosinophilia was defined as an eosinophil percentage of >3% of the total leukocytes. Perinatal parameters and clinical parameters were also analyzed. Results: Of the 261 infants born at <34 weeks gestation, 22.4% demonstrated eosinophilia at birth. The eosinophil percentage peaked in the fourth postnatal week at 7.5%. The incidence of severe eosinophilia increased after birth up to the fourth postnatal week when 8.8% of all patients had severe eosinophilia. Severity of eosinophilia was positively correlated with a lower gestational age, birth weight, and Apgar score. Respiratory distress syndrome, bronchopulmonary dysplasia, nephrocalcinosis, intraventricular hemorrhage, and sepsis were associated with a higher eosinophil percentage. The eosinophil percentage was significantly higher in infants with bronchopulmonary dysplasia from the first postnatal week and the percentage was the highest in the fourth postnatal week, with the maximal difference being 4.1% (P<0.001). Conclusion: Eosinophilia is common in premature infants and reaches peak incidence and severity in the fourth postnatal week. The eosinophil percentage was significantly higher in bronchopulmonary dysplasia patients from the first postnatal week. Severe eosinophilia was significantly associated with the incidence of bronchopulmonary dysplasia even after adjusting for other variables.