• 대한치과교정학회지
• /
• 제51권2호
• /
• pp.135-141
• /
• 2021

Objective: To assess the effects of thermoforming on aligner thickness and gap width in six aligner systems with the same nominal thickness. Methods: Six passive upper aligners of different brands were adapted to a single printed cast. Each sample was evaluated with high-resolution micro-computed tomography. To investigate aligner thickness and gap width, two-dimensional (2D) analysis was conducted assessing the effects of the following variables: tooth type (central incisor, canine, and first molar), 2D reference points, and aligner type. Data were analyzed and compared using analysis of variance and Tukey's post-hoc tests (p < 0.05). Results: Tooth type, dental region, and aligner type affected both the gap width and aligner thickness. The aligner thickness remained moderately stable across the arch only in the F22. Conclusions: All thermoformed samples displayed smaller aligner thickness and gap width at anterior teeth and both gingival and coronal centers than at posterior teeth and occlusal surfaces.

• Journal of Periodontal and Implant Science
• /
• 제38권sup2호
• /
• pp.373-384
• /
• 2008

Purpose: The aim of this study is to compare the healing response of various Hydroxyapatite(HA) coated dental implants by Ion-Beam Assisted Deposition(IBAD) placed in the surgically created circumferential gap in dogs. Materials and methods: In four mongrel dogs, all mandibular premolars and the first molar were extracted. After an 8 weeks healing period, six submerged type implants were placed and the circumferential cylindrical 2mm coronal defects around the implants were made surgically with customized step drills. Groups were divided into six groups : anodized surface, anodized surface with 150nm HA and heat treatment, anodized surface with 300nm HA and heat treatment, anodized surface with 150nm HA and no heat treatment, and anodized surface with 150nm HA, heat treatment and bone graft, anodized surface with bone graft. The dogs were sacrificed following 12 weeks healing period. Specimens were analyzed histologically and histomorphometrically. Results: During the healing period, healing was uneventful and implants were well maintained. Anodized surface with HA coating and $430^{\circ}C$ heat treatment showed an improved regenerative characteristics. Most of the gaps were filled with newly regenerated bone. The implant surface was covered with bone layer as base for intensive bone formation and remodeling. In case that graft the alloplastic material to the gaps, most of the coronal gaps were filled with newly formed bone and remaining graft particles. The bone-implant contact and bone density parameters showed similar results with the histological findings. The bone graft group presented the best bone-implant contact value which had statistical significance. Conclusion: Within the scope of this study, nano-scale HA coated dental implants appeared to have significant effect on the development of new bone formation. And additional bone graft is an effective method in overcoming the gaps around the implants.

• Journal of Periodontal and Implant Science
• /
• 제38권sup2호
• /
• pp.385-394
• /
• 2008

Purpose: The aim of this study was to evaluate the factors affecting healing patterns of surgically created circumferential gap defects around implants in dogs. Materials and Methods: In four mongrel dogs, all mandibular premolars were extracted. After 8 weeks of healing periods, implants were submerged. According to the surface treatment, turned surface was designated as a group A and rough surface as a group B. In each dog, surgical defects on the left side were made with a customized tapered step drill and on the right with a customized paralleled drill. Groups were also divided according to the width of the coronal gaps: 1.0mm, 1.5mm, or 2.0mm. The dogs were sacrificed following 8 weeks and the specimens were analyzed histologically and histomorphometrically. Results: During the postoperative period, healing was uneventful and implants were well-maintained. As the size of the coronal gap was increased, the amount of bone-to-implant contact was decreased. The bone healing was greater in rough surface implants compared to the turned ones. About the defect morphology, tapered shape showed much bone healing and direct bone to implant contact even in the smooth surface implants. Conclusion: Healing of the circumferential defect around dental implant is influenced by the implant surface, defect width and the morphology of the defect. When using rough surface implants, circumferential gap defects within 2 mm do not need any kinds of regenerative procedures and the healing appeared to be faster in the tapered defect morphology than the paralleled one.

• 천문학회보
• /
• 제37권2호
• /
• pp.137.1-137.1
• /
• 2012

If all Coronal mass ejections (CMEs) have flux ropes, then the CMEs should keep their helicity signs from the Sun to the Earth according to the helicity conservation principle. We select 34 CME-ICME pairs whose source active regions (ARs) have continuous SOHO/MDI magnetogram data covering more than 24 hr without data gap during the passage of the ARs near the solar disk centre. The helicity signs in the ARs are determined by estimation of accumulating amounts of helicity injections through the photospheric surfaces in the entire source ARs. The helicity signs in the ICMEs are estimated by applying the cylinder model developed by Marubashi (2000) to 16 second resolution magnetic field data from the MAG instrument onboard the ACE spacecraft. It is found that 30 out of 34 events (88%) are helicity sign-consistent events, while 4 events (12%) are sign-inconsistent. Through a detailed investigation of the AR solar origins of the 4 exceptional events, we find that those exceptional events can be explained by the local AR helicity sign opposite to that of the entire AR helicity (2000 July 28 ICME), incorrectly reported solar source in CDAW (2005 May 20 ICME), or the helicity sign of the pre-existing coronal magnetic field (2000 October 13 and 2003 November 20 ICMEs). We conclude that the helicity signs of the ICMEs are quite consistent with those of the injected helicities in the AR regions where CMEs were erupted.

• 천문학논총
• /
• 제11권1호
• /
• pp.263-277
• /
• 1996

We have intensively carried out numerical calculations on flare predictions from the solar activity data for photospheric sunspots, chromospheric flare and plages, coronal X-ray intensities and 2800MHz radio fluxes, by using multilinear regression method. Intensities of solar flares for the next day have been predicted from the solar data between 1977-1982 and 1993-1996. Firstly, we have calculated flare predictions with the multilinear regression method, by using separate solar data in growth and decay phase of sunspot area and magnetic field strength from the whole data on solar activities. Secondly, the same operations as above have been made for the remaining data after removal of the data with large deviation from the mean calculated by the above prediction method. we have reached a conclusion that average hit ratio of correct predictions to total predictions of flares with class of M5 over has been as high as 70% for the first case and that of correct prediction number to total observation number has been shown as 61%.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.94-100
• /
• 2015

태양흑점폭발로 인해 방출되는 코로나 물질은 지자기 교란을 일으킨다. 대규모 지자기 교란으로 인한 유도전류는 변압기 손상을 일으킬 수 있다. 이러한 유도전류를 산출하기 위해 먼저 유도전기장을 산출해야 한다. 푸리에 변환 방법을 적용한 유도전기장 산출방법은 정확도가 높으나, 1일 24시간 동안의 관측 데이터가 필요하다. 반면, 적분 공식을 적용한 유도전기장 산출방법은 실시간 데이터로 산출이 가능하나, 정확도 확인이 요구된다. 이 논문에서 적분 구간을 조정하여 푸리에 변환 방법의 결과값과 오차를 줄이고자 하였다. 그 결과, 적분 공식을 적용한 유도전기장 예상값은 푸리에 변환방법의 예상값과 상관성이 높았으며, 적분 공식으로 산출한 유도전류 예상값은 유도전류 관측값과 시간 동기 및 방향이 일치하고, 그 크기가 오차 범위 1 A 이하에서 92 % 이상 일치함을 확인하였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.967-972
• /
• 2018

Study Design: Biomechanical study. Purpose: To investigate the relative stiffness of a new posterior pelvic fixation for unstable vertical fractures of the sacrum. Overview of Literature: The reported operative fixation techniques for vertical sacral fractures include iliosacral screw, sacral bar fixations, transiliac plating, and local plate osteosynthesis. Clinical as well as biomechanical studies have demonstrated that these conventional techniques are insufficient to stabilize the vertically unstable sacral fractures. Methods: To simulate a vertically unstable fractured sacrum, 12 synthetic pelvic models were prepared. In each model, a 5-mm gap was created through the left transforaminal zone (Denis zone II). The pubic symphysis was completely separated and then stabilized using a 3.5-mm reconstruction plate. Four each of the unstable pelvic models were then fixed with two iliosacral screws, a tension band plate, or a transiliac fixation plus one iliosacral screw. The left hemipelvis of these specimens was docked to a rigid base plate and loaded on an S1 endplate by using the Zwick Roell z010 material testing machine. Then, the vertical displacement and coronal tilt of the right hemipelves and the applied force were measured. Results: The transiliac fixation plus one iliosacral screw constructions could withstand a force at 5 mm of vertical displacement greater than the two iliosacral screw constructions (p=0.012) and the tension band plate constructions (p=0.003). The tension band plate constructions could withstand a force at $5^{\circ}$ of coronal tilt less than the two iliosacral screw constructions (p=0.027) and the transiliac fixation plus one iliosacral screw constructions (p=0.049). Conclusions: This study proposes the use of transiliac fixation in addition to an iliosacral screw to stabilize vertically unstable sacral fractures. Our biomechanical data demonstrated the superiority of adding transiliac fixation to withstand vertical displacement forces.

• Investigative Magnetic Resonance Imaging
• /
• 제9권2호
• /
• pp.117-133
• /
• 2005

자기공명영상에서 병리구조물을 깨닫기 위해서는 먼저 자기공명영상에서 정상 해부구조물을 깨달아야 한다. 자기공명영상에서 해부구조물을 익히기 위해서는 다음과 같은 학습 자료가 필요하다. 첫째, 온몸의 자기공명영상, 둘째, 수평, 이마 그리고 마루 자기공명영상, 셋째, 자기공명영상에 들어맞는 구역화영상, 넷째, 자기공명영상에 있는 해부구조물의 3차원영상, 넷째, 자기공명영상, 구역화영상 그리고 3차원영상을 볼 수 있는 소프트웨어가 필요하다. 그러나 지금까지 이러한 학습 자료를 구하기 힘들었다. 따라서 이 연구에서는 의과대학 학생과 의사가 자기공명영상에서 정상 해부구조물을 익히는 데 도움을 주는 학습 자료를 다음처럼 만들었다. 표준 체형을 가진 건강한 한국인 남성을 골랐다. 온몸의 자기공명영상 613장을 찍고(slice thickness 3 mm, interslice gap 0 mm, field of view 480mm${\times}$480mm, resolution 512${\times}$512, T1 weighted) 개인용 컴퓨터에 옮겼다. 자기공명영상에 있는 60개의 해부구조물을 구역화해서 구역화영상을 만들었다. 이마, 마루 자기공명영상과 이마, 마루 구역화영상을 만들었다. 구역화영상을 바탕으로 47개 해부구조물의 3차원영상을 수동 표면재구성 방법으로 만들었다. 자기공명영상, 구역화영상, 3차원영상을 볼 수 있는 소프트웨어를 만들었다. 이 연구에서 만든 온몸의 수평, 이마, 마루 자기공명영상, 자기공명영상에 들어맞는 구역화영상, 3차원영상, 소프트웨어와 같은 학습 자료는 의과대학 학생과 의사가 자기공명영상에서 정상 해부구조물을 익히는 데 도움을 줄 것이다. 이 학습 자료는 인터넷이나 CD를 통해서 널리 퍼뜨릴 것이다.

• 말소리와 음성과학
• /
• 제5권1호
• /
• pp.109-121
• /
• 2013

This study examined several kinematic properties of the primary articulator (the tongue dorsum) and the supplementary articulator (the jaw) in the articulation of the voiceless velar stop (/k/) within nonassimilating contexts. We examined in particular the spatiotemporal properties (constriction duration and constriction maxima) from the constriction onset to the constriction offset by analyzing a velar (/k/) followed by the coronal fricative (/s/), the coronal stop (/t/), and the labial (/p/) in across-word boundary conditions (/k#s/, /k#t/, and /k#p/). Along with these measurements, we investigated intergestural temporal coordination between C1 and C2 and the jaw articulator in relation to its coordination with the articulation of consonant sequences. The articulatory movement data was collected by means of electromagnetic midsagittal articulometry (EMMA). Four native speakers of Seoul Korean participated in the laboratory experiment. The results showed several characteristics. First, a velar (/k/) in C1 was not categorically reduced. Constriction duration and constriction degree of the velar (/k/) were similar within nonassimilating contexts (/k#s/=/k#t/=/k#p/). This might mean that spatiotemporal attributes during constriction duration were stable and consistent across different contexts, which might be subsequently associated with the nontarget status of the velar in place assimilation. Second, the gestural overlap could be represented as the order of /k#s/ (less) < /k#p/ (intermediate) < /k#t/ (more) as we measured the onset-to-onset lag (a longer lag indicated shorter gestural overlap.). This indicates a gestural overlap within nonassimilating contexts may not be constrained by any of the several constraints including the perceptual recoverability constraint (e.g., more overlap in Front-to-Back sequences compared to the reverse order (Back-to-Front) since perceptual cues in C1 can be recovered anytime during C2 articulation), the low-level speech motor constraint (e.g., more overlap in lingual-nonlingual sequences as compared to the lingual-lingual sequences), or phonological contexts effects (e.g., similarity in gestural overlap within nonassimilating contexts). As one possible account for more overlap in /k#t/ sequences as compared to /k#p/, we suspect speakers' knowledge may be receptive to extreme encroachment on C1 by the gestural overlap of the coronal in C2 since it does not obscure the perceptual cue of C1 as much as the labial in C2. Third, actual jaw position during C2 was higher in coronals (/s/, /t/) than in the labial (/p/). However, within the coronals, there was no manner-dependent jaw height difference in C2 (/s/=/t/). Vertical jaw position of C1 and C2 was seen as inter-dependent as higher jaw position in C1 was closely associated with C2. Lastly, a greater gap in jaw height was associated with longer intergestural timing (e.g., less overlap), but was confined to the cluster type (/kp/) with the lingual-nonlingual sequence. This study showed that Korean jaw articulation was independent from coordinating primary articulators in gestural overlap in some cluster types (/k#s/, /k#t/) while not in others (e.g., /k#p/). Overall, the results coherently indicate the velar stop (/k/) in C1 was robust in articulation, which may have subsequently contributed to the nontarget status of the velar (/k/) in place assimilation processes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.571-577
• /
• 2008

Introduction: Possible etiologic factors associated with bone loss around implants after implantation are surgical trauma, occlusal overload, periimplantitis, presence of micro gap and the formation of biologic distances. Tarnow et al. observed that the crestal bone loss was greater when the distance between the implants was <3mm than when the implants were ${\geq}\;3mm$ apart. The aim of this study was to evaluate the influence of different interimplant distance on marginal bone and crestal bone resorption in the beagle dogs. Materials and methods: The mandibular premolars of 5 dogs were extracted bilaterally. After 12 weeks of healing, each dog received 7 implants. On each side, implants were separated by 2mm (Group 1) and by 5mm (Group 2). After 16 weeks of healing, the dogs were sacrificed. Marginal bone loss was determined through linear measurements made between the implant-abutment junctions and the most coronal portions of the bone in contact with the implant surface. A line was drawn uniting the implant-abutment junctions of the adjacent implants, and a linear measurement was made at the midpoint in the direction of the most coronal peak of the interimplant bone crest to determine the crestal bone loss. Both of them was measured radiologically and histologically. Result and conclusion: In radiological analysis, the mean of marginal bone loss was $1.26{\pm}0.14mm$ for group 1 and $1.23{\pm}0.34mm$ for group 2, the mean of crestal bone loss was $1.10{\pm}0.14mm$ for group 1 and $1.02{\pm}0.30mm$ for group 2. The results were not statistically significant between 2 groups. In histological analysis, the mean of marginal bone loss was $1.63{\pm}0.48mm$ for group 1 and $1.62{\pm}0.50mm$ for group 2, the mean of crestal bone loss was $1.23{\pm}0.35mm$ for group 1 and $1.15{\pm}0.39mm$ for group 2. The differences were also not statistically significant. The clinical significance of this result is that the increase in the crestal bone loss results in the increase in the distance between the base of the interproximal contact of the crowns and the bone crest, and this determines if papilla will be present or absent between implants. Considering this fact, keeping up sufficient interimplant distance is important to minimize crestal bone loss.