• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.30 no.3
• /
• pp.149-170
• /
• 2019

This study aimed at analyzing the 6 foreign reformed theological journals and index terms, authors to find out the intellectual structures and the characteristics of the journals, the authors. First, analyzing the index terms, we analyzed the main keywords and the increasing trend by period, second, analyzing the journals, we analyzed the main subject of them and the subjects of distinguishing features by the journals, third we analyzed the authors' profiling. The index terms were clustered four big clusters and 23 small clusters. The journals were clustered the two clusters, and we also analyzed the index terms to distinguish a journal from other journals. The authors were clustered the six clusters, the index terms the clusters of the authors shared were similar to the results of the two analyses. The biblical teachings of The Old Testament and the New Testament and reformed theology were core subject terms and it was consistent in the results of these three analyses. This study mainly aimed at analyzing the 6 foreign reformed theological journals, and we found out that the parts of the results of this study were similar to the results of analyzing the domestic reformed theological journals. Therefore, there should be more researches needed to figure out what the results of this study mean to Korean reformed theology.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2019

Composite pile, which is composed of the steel pipe pile in which the large horizontal force acts and the PHC pile in which the small horizontal force acts by a special connecting devices, is being commercialized as a base material for civil engineering structures. The core of such a composite pile can be said to be a design criterion for estimating the joint position and stability of the connection device between steel pipe pile and PHC pile. In Korea, there is no precise specification for the location of composite pile joints. In the LH Design Department (Korea Land & Housing Corporation, 2009), "Application of composite pile design and review of design book marking" was made with reference to Road Design Practice Volume 3 (Korea Expressway Corporation, 2001). this is used as a basis of the design of the composite pile. It can not be regarded as a section change of the composite pile, so it has a limitation in application. Therefore, In this study, we propose a design criterion for the location of the section of the composite pile (joint of steel pipe pile and PHC pile) and evaluate the stability and economical efficiency of it by using experimental method and analytical method. Analysis of composite pile design data installed in 79 domestic bridges abutment showed that the stresses, bending moments, and displacements acting on the pile body and connection of the pile were analyzed. Through the redesign process, it was confirmed that the stresses generated in the connecting device occur within the allowable stress values of the connecting device and the PHC pile. In conclusion, the design proposal of composite pile joint location through empirical case study in this study is an improved design method considering both stability and economical efficiency in designing composite pile.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.674-681
• /
• 2021

Cyber attacks targeting critical infrastructure are on the rise. Critical infrastructure is defined as core infrastructures within a country with a high degree of interdependence between the different structures; therefore, it is difficult to sufficiently protect it using outdated cybersecurity techniques. In particular, the distinction between the physical and logical risks of critical infrastructure is becoming ambiguous; therefore, risk management from a comprehensive perspective must be implemented. Accordingly, as a means of further actively protecting critical infrastructure, major countries have begun to apply their security and cybersecurity systems by design, as a more expanded concept is now being considered. This proactive security approach (CSbD, Cybersecurity by Design) includes not only securing the stability of software (SW) safety design and management, but also physical politics and device (HW) safety, precautionary and blocking measures, and overall resilience. It involves a comprehensive security system. Therefore, this study compares and analyzes security by design measures towards critical infrastructure that are leading the way in the US, Europe, and Singapore. It reflects the results of an analysis of optimal cybersecurity solutions for critical infrastructure. I would like to present a plan for applying by Design.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.292-302
• /
• 2021

The purpose of this study was to use Google Classroom for Cooking Practice Subject. We would like to present a practice class operation method suitable for the current educational environment and conditions. If the Untact Class in the Practice Subject is conducted in the future, we want to cultivate the core competencies and practical skills of the major. In addition, Q Methodology, which can be extracted by type, was applied by analyzing subjective opinions or perception structures for the cooking major students who are currently experiencing the curriculum. The survey period was conducted from March 23 to April 30, 2020 for first-year Cooking Major students taking the Cooking Practice Subject. Type 1 (N=11): Development of cooking training kit, Type 2 (N=7): Special lectures from industry experts, Type 3 (N=7): Development of practice form self-directed learning, respectively. Based on this study, it is expected to contribute to the Q Methodology on the development of the curriculum for the operation of the cooking practice subject, the effectiveness of education, and the application of learning methods.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.427-476
• /
• 2020

Park Wudang formally registered Daesoon Jinrihoe in 1969. While it shares ideas and history with other Jeungsanist groups, this paper argues that its organizational profile is unique. The two major institutional structures, the bonbu (headquarters) and the bangmyeon (branch) have together created space for the rapid development of this Korean new religion. The bonbu is a centralized hierarchy, while the bangmyeon exhibits the strong loyalty and cohesiveness of the clan. Running throughout both structural forms is the lineage concept, which is conceived here as an articulating paradigm able to operate in different organizational forms. This finely-balanced institutional structure makes a major contribution to Daesoon Jinrihoe's ability to fulfill its religious mission. The first side of this balance is the headquarters, which includes the core organization based in Yeoju as well as some outside temples and training centers. All of these were established under the direction of the Lord of Principle, the Dojeon, Park Wudang. Park Wudang also fixed the Dao Constitution, the Doheon, which serves as a blueprint for governance. From the Central Council to the various institutions for propagation, guidance, and auditing, current management practices conform closely to Park Wudang's organization vision. The second aspect of Daesoon Jinrihoe's organization is the branch structure. The larger branches, such as Yeongwol and Geumreung, are complex organizations in their own rights. The paper concludes by characterizing the two major axes of headquarters and branch as organizational types. Using Robert Quinn and Kim Cameron's institutional typology, the paper concludes that the bonbu is a classic centralized hierarchy with its focus on efficiency. The bangmyeon, in contrast, with its high level of group identity and spirit, comes approximates the clan institutional structure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.226-234
• /
• 2021

The objective of this study is to establish the fundamental design data for axial load-displacement relationship under axial monotonic or cyclic responses of seismic damping·isolation (SDI) units developed for ceiling structures. The main parameters include the installation of a spring, the number of rubber layer, prestress stress of bolts for connector between the spring and rubbers, and loading type. Test results showed that SDI units with a spring in the core and higher prestress stress of bolts tended to be higher stiffness at the ascending branch and more ductile behavior at the descending branch. This trends more notable for the specimens under monotonic load rather than cyclic loads. Consequently, the energy dissipation of SDI unit can be optimally designed with the following conditions: installation of a spring within 3-layer rubbers and prestress applied to the bolts at 10% of their yielding strength . When compared with the experimental tension capacity of the developed SDI units, the predictions by JIS B 2704-1 and KDS 31 00 are conservative under monotonic loading but higher by approximately 10% under cyclic loading.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.273-282
• /
• 2023

Probabilistic safety assessment (PSA) has been widely used to evaluate the seismic risk of nuclear power plants (NPPs). However, studies on seismic PSA for process plants, such as gas plants, oil refineries, and chemical plants, have been scarce. This is because the major disasters to which these process plants are vulnerable include explosions, fires, and release (or dispersion) of toxic chemicals. However, seismic PSA is essential for the plants located in regions with significant earthquake risks. Seismic PSA entails probabilistic seismic hazard analysis (PSHA), event tree analysis (ETA), fault tree analysis (FTA), and fragility analysis for the structures and essential equipment items. Among those analyses, ETA can depict the accident sequence for core damage, which is the worst disaster and top event concerning NPPs. However, there is no general top event with regard to process plants. Therefore, PSA cannot be directly applied to process plants. Moreover, there is a paucity of studies on developing fragility curves for various equipment. This paper introduces PSA for gas plants based on FTA, which is then transformed into Bayesian network, that is, a probabilistic graph model that can aid risk-informed decision-making. Finally, the proposed method is applied to a gas plant, and several decision-making cases are demonstrated.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.86-96
• /
• 2022

The development trend of jet fighter's avionics system architecture is the digitization of subsystem component functions, increased RF sensor sharing, fiber optic channel networks, and modularized integrated structures. The avionics system architecture of the fifth generation jet fighters (F-22, F-35) has evolved into an integrated modular avionics system based on computing function integration and RF integrated sensor systems. The integrated modular avionics system of jet fighters should provide improved combat power, fault tolerance, and ease of jet fighter control. To this aim, this paper presents the direction and requirements of the next-generation jet fighter's avionics system architecture through analysis of the fifth generation jet fighter's avionics system architecture. The core challenge of the integrated modularized avionic system architecture requirements for next-generation fighters is to build a platform that integrates major components and sensors into aircraft. In other words, the architecture of the next-generation fighters is standardization of systems, sensor integration of each subsystem through open interfaces, integration of functional elements, network integration, and integration of pilots and fighters to improve their ability to respond and control.

• Korea Trade Review
• /
• v.41 no.5
• /
• pp.63-87
• /
• 2016

Despite its rising labor costs these days, China still serves the role as 'World's Factory' thanks to a great deal of foreign direct investment, still remaining one of the world's highest, and the global companies, which have been willingly establishing foreign subsidiaries in China. While enjoying the benefits from the Chinese market, these global companies can now take advantages of another market; the one of Korea. If a product produced by a certain global company is actually manufactured in the local factory in China and the product meets specifications of Rules of Origin, the product shall receive preferential treatment under China-Korea FTA. In the perspective of global market, therefore, it is found that China-Korea FTA may have negative effects on chemical industry in Korea, which is considered one of the representatives of China-Korea FTA. This study examines such risks by network analysis, with several cases of 'Beauty or Make-up Preparations (HS Code 3304).' Analysis shows that Korea is classified as the marginal country group but not main country group when it comes to beauty products family. So this can be a great chance to the global cosmetic companies with local factories in China in the sense that they can increase their sales towards the market of Korea based on the China-Korea FTA. Under these concerns, this study suggests two policy alternatives for the chemical industry in Korea to deal with current challenges rising from China-Korea FTA. The suggested alternatives are: to actively attract the global chemical corporations which are yet to directly enter the Chinese market; and to invest on chemical products with high potential of growth as a priority.

• Journal of the Korean earth science society
• /
• v.42 no.3
• /
• pp.311-324
• /
• 2021

Recently, ten geosites have been considered in Hwaseong for endorsement as national geoparks, including the Jebudo, Gojeongri Dinosaur Egg Fossils, and Ueumdo geosites. The Jebudo geosite in the southern part of the Seoul metropolitan area has great potential for development as a new geoscience educational site because it has geological, geographical (landscape), and ecological significance. In this study, we described the geological characteristics through field surveys in the Jebudo geosite. We evaluated its potential as a geo-education site based on comparative analysis with other geosites in Hwaseong Geopark. In addition, we reviewed the practical effect of field education at geosites on the essential concepts and critical competence-oriented education emphasized in the current 2015 revised science curriculum. The Jebudo Geosite is geologically diverse, with various metamorphic rocks belonging to the Precambrian Seosan Group, such as quartzite, schist, and phyllite. Various geological structures, such as clastic dikes, faults, joints, foliation, and schistosity have also been recorded. Moreover, coastal geological features have been observed, including depositional landforms (gravel and sand beaches, dunes, and mudflats), sedimentary structures (ripples), erosional landforms (sea cliffs, sea caves, and sea stacks), and sea parting. The Jebudo geosite has considerable value as a new geo-education site with geological and geomorphological distinction from the Gojeongri Dinosaur Egg Fossils and Ueumdo geosites. The Jebudo geosite also has opportunities for geo-education and geo-tourism, such as mudflat experiences and infrastructures, such as coastal trails and viewing points. This geosite can help develop diverse geo-education programs that improve key competencies in the science curriculum, such as critical thinking, inquiry, and problem-solving. Furthermore, by conducting optimized geo-education focused on the characteristics of each geosite, the following can be established: (1) the expansion of learning space from school to geopark, (2) the improvement of understanding of specific content elements and linkage between essential concepts, and (3) the extension of the education scope throughout the earth system. There will be positive impacts on communication, participation, and lifelong learning skills through geopark education.