• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.165-166
• /
• 2014

The application of particle reaction model in the packed bed process modeling is discussed for iron ore pellet induration process. Combustion of coke breeze in the pellet is estimated by using shrinking unreacted-core model and grain model in which the progress of chemical reaction is described in different concepts. Under the identical inlet gas and solid conditions, the calculation using shrinking core model showed deviated results in terms of temperature profile and conversion fraction, which may imply the significance of selecting proper particle reaction model in consideration of particle characteristics and process operation conditions.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.27-36
• /
• 2002

다양한 가능을 가진 고분자 복합재료인 Core-shell 복합인자를 제조하여 부직포 바인더로 사용하기 위하여 유기/유기계 core-shell 에멀젼 중합을 시도하였다. 유기/유기계 Core-shell 중합으로 메틸메타아크릴레이트(MMA), 스티렌(St)의 core와 shell의 단량체, 개시제는 과황산암모늄(APS) 유화제는 도데실벤젠슬폰나트륨(SDBS)의 농도, 교반속도를 변화시켜 전환율, 분자량, 입자경과 입자형태, 유리전이온도, 인장강도를 측정하여 최적반응조건을 산출하였다. 1) PMMA, PSt core와 shell의 입자중합은 각각 개시제의 농도 $1.58{\times}10^{-3}mol/L$와 $4.0{\times}10^{-4}mol/L$가 최적이다. 2) PMMA/PSt의 PMMA core 중합에서 유화제의 농도는 $1.45{\times}10^{-5}mol/L$, PSt/PMMA의 PSt core 중합은 $2.91{\times}10^{-5}mol/L$가 최적이다. 3) 유화중합에 최적교반속도는 200 rpm이며, 입자안정성은 유화제 첨가량과 비례하여 증가하였다. 4) Core-shell 복합입자는 동일조성의 공중합체에 비하여 유리온도 조절이 용이하고, 인장강도값도 높게 측정되었다.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.199-204
• /
• 2009

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

• 한국응용과학기술학회지
• /
• 제27권1호
• /
• pp.56-60
• /
• 2010

Titanium dioxide particles are used as photocatalysts, sensors, adsorbents and catalyst. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 0.5~2.0 wt% EU-S133D, Titanium dioxide / Acrylate core-shell polymerization was carried out on the surface of Titanium dioxide particle without forming the new Titanium dioxide particle during acrylate shell polymerized in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

• 한국응용과학기술학회지
• /
• 제21권3호
• /
• pp.259-266
• /
• 2004

Film properties of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. Tensile strength and tensile elongation at break of final films were evaluated. Those properties can be interpreted in terms of PBA/PMMA phase ratio and their morphology. The interfacial adhesion strength was also evaluated using $180^{\circ}$ peel strength measurement and cross hatch cutting test.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.28-35
• /
• 2019

Dry water is a core-shell structured powder which comprises a very fine water core covered with hydrophobic silica particles. Recently, the dry water has attracted attention as a new type of fire extinguishing agents. However, characteristics of the dry water as a fire extinguishing agent have not been revealed until now. To our best knowledge, this is the first work to uncover effects of particle size of the dry water on the fire extinguishing performance. Pristine dry water, which has heterogeneous particle size distribution, was carefully separated by sieving method into three fractions which were a small size (ca. $110{\mu}m$) fraction, a medium size (ca. $220{\mu}m$) fraction and a large size (ca. $400{\mu}m$) fraction. Microscopic observations confirmed the effective separation of dry water's particle size. In extinguishing tests of wood cribs fire, the medium size dry water showed most excellent fire extinguishing performance, as compared to other dry waters having small (ca. $110{\mu}m$) and large (ca. $400{\mu}m$) particle size. The good performance of the medium size (ca. $220{\mu}m$) dry water may be attributed to the balance between cooling effect of the water core and smothering effect of the silica particles. It is also revealed that small size dry water has poor flowability than large size dry water.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.81-87
• /
• 2004

Composite particles using inorganic and organic chemicals were synthesized and the results of those reaction were compared to variation of temperature and agitation speed in presence of $CaCO_3$ which was adsorbed SDBS. Also the synthesises were optimized according to conversion rate of composite particles. In inorganic/organic core-shell composite particle polymerization, $CaCO_3$ adsorbed by 0.5wt% surfactant SDBS was prepared initially and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA at the addition of APS 3.16${\times}$$10^{-3}$mol/L to minimize the coagulated PMMA particle itself during MMA shell polymerization. Encapsulated PMMA on $CaCO_3$ as inorganic/organic core-shell particles was verified by FT-IR and DSC analysis. It was found that the $CaCO_3$ was very well encapsulated by PMMA as shell. The surfaces were distinctly found as spindle shape and broad particle distribution after capsulation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.325-326
• /
• 2015

Combustion of coke grains in a pellet used to be modeled using the shrinking core model in the previous indurator simulations. This leads to the discussions about its propriety due to the fundamental assumptions of the model inconsistent with the particle characteristics. The current study presents the grain model as an improvemen, and the differently used reaction models are compared. In addition, the simulations assuming changed particle conditions are conducted to display the effects of using the grain model.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 2003

To investigate the effect of the parameters of the plasma arc discharge process on the particle formation and particle characteristics of the iron nano powder, the chamber pressure, input current and the hydrogen volume fraction in the powder synthesis atmosphere were changed. The particle size and phase structure of the synthesized iron powder were studied using the FE-SEM, FE-TEM and XRD. The synthesized iron powder particle had a core-shell structure composed of the crystalline $\alpha$-Fe in the core and the crystalline $Fe_3O_4$ in the shell. The powder generation rate and particle size mainly depended on the hydrogen volume fraction in the powder synthesis atmosphere. The particle size increased simultaneously with increasing the hydrogen volume fraction from 10% to 50%, and it ranged from about 45nm to 130 nm.

• 한국건설순환자원학회논문집
• /
• 제2권1호
• /
• pp.120-127
• /
• 2006

폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다.