• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.695-696
• /
• 2008

This paper deals with the reduction of DC component of cogging toruqe by using the heat treatment of the stator core. The stator core is made of electrical steel sheared by the punching die. From the punching process, large mechanical stress at the edge of stator tooth induces significant plastic and elastic deformation and influences magnetic properties. Then, these phenomenon in the sheared region has influence on the magnetic unbalance in the air-gap of motor. This paper investigated the effect of the punching process on the magnetization process and the mechanical deformation and proposed the stress relief annealing method for the reduction of friction torque among one of motor characteristics.

• International Journal of Contents
• /
• 제15권3호
• /
• pp.39-46
• /
• 2019

This study aimed to develop a peer-assisted learning (PAL) program for use in a core nursing skills education course and to investigate the effects of the education program on three key outcomes. A comparative study was conducted through the division of students of a core nursing skills education program into a treatment group and control group. After the programs, self-efficacy, confidence and satisfaction were compared between the groups. The comparison of these three factors indicated that the related scores were significantly higher in the treatment group receiving the education program with the PAL method than those of the control group receiving traditional education. We concluded that self-efficacy gave the nursing students the confidence that they could successfully perform their tasks and motivation to learn. Education programs using the PAL method are suggested as an effective method for the acquisition of skills among nursing students.

• 생명과학회지
• /
• 제22권2호
• /
• pp.245-250
• /
• 2012

Vibrio속의 core 균주(Vibrio alginolyticus, Vibrio parahaemolyticus)를 포함하여 총 6 종의 Vibrio 균주(V. fluvialis, V. proteolyticus, V. vulnificus, V. mimicus)와 Grimontia (Vibrio) hollisae의 16S rDNA를 PCR 증폭하여 Alu I, Cfo I, Dde I, Hae III, Msp I, Rsa I의 6 종의 제한효소를 처리 후 RFLP 분석을 수행하였다. 2 종의 core 균주와 V. proteolyticus는 4 종의 제한효소(Cfo I, Dde I, Msp I, Rsa I)에서 동일한 제한효소 패턴을 나타내었다. 제한효소의 패턴의 조합에 의해 6 종의 Vibrio 종은 6 개의 RFLP type으로 구분되었다. 특히 Alu I의 경우, 실험된 6 종의 Vibrio속에 대하여 각기 다른 6 개의 종 특이적 RFLP type을 나타내었다. 제한효소 패턴에 근거하여 작성한 덴드로그램에서 Vibrio core group 균주인 V. alginolyticus 와 V. parahaemolyticus는 90% 이상의 매우 높은 유사도를 나타내었다. 반면 Grimontia hollisae는 실험된 모든 제한효소 패턴에서 Vibrio속 세균과는 분명히 구분되는 RFLP type을 나타내었다. 따라서 PCR-RFLP는 제한효소를 적절히 선택한다면 Vibrio 속 세균의 신속한 구분에 여전히 유용하다.

• 대한치과보철학회지
• /
• 제20권1호
• /
• pp.25-32
• /
• 1982

An in vitro study was conducted to compare the bond strength of cements between Verabond coping and various cores. Fifty-four idential cores simulating maxillary central incisor prepared for PFM crowns were made. Eighteen samples were made with 20K cast gold, eighteen with Verabond, and eighteen with Adaptic. Samples were randomly divided into three groups, each consisting of six 20K cast gold, six verabond, and six Adaptic samples. The first group was cemented with zinc phosphate cement, the second group with poly-carboxylate cement, and the third group with glass ionomer cement. Constant finger pressure was applied for cementation. The sample were then stored at $37^{\circ}C$ in distilled water bath for 24 hours. The tensile strength test was performed on an Instron Universal test machine with crosshead speed of 0.05cm/min and the results compared statistically. Results of the study showed that: 1. A significant difference of bond strength was observed with different types of dental cements and core materials. 2. With gold core, zinc phosphate cement was stronger than both the polycarboxylate cement and glass ionomer cement, which did not differ in bond strength. 3. With base-metal core, zinc phosphate cement showed the highest bond strength and was followed by polycarboxylate cement and glass ionomer cement. 4. With composite resin core, zinc phosphate cement showed the highest bond strength and was followed by glass ionomer cement and polycarboxylate cement. 5. The base-metal core (Verabond core) privided the highest retention of all core materials.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.53-59
• /
• 1982

An in vitro study was performed in order to evaluate the restoring methods in the endodontically treated molar teeth. 68 extracted teeth were divided into 4 groups according to the restoring techniques. The teeth of first group were restored by amalgam. Those of second group were restored by the stainless steel post and amalgam. The teeth of the third group were restored by the amalgam with crown. The teeth of the fourth group were restored by the stainless steel post and amalgam core with crown. All the specimens were tested and measured for the fracture load by means of the Instron (UTM-111-500 Toyo Baldwin Co., LTD. Japan) and the Pressure Instrument (Yonsei University, Department of Metal Engineering.) The results were as follows; 1. There were no statistical differences in the fracture loads between the amalgam restoration and post-amalgam core restorative techniques. 2. The techniques of amalgam core with crown showed lower fracture loads those of post and amalgam core with crown. 3. In the crowned teeth, they presented higher fracture loads than those without crown.

• 농촌계획
• /
• 제9권3호
• /
• pp.41-46
• /
• 2003

The study was focused on setting priority for future core technologies in rural development and resources using AHP. The technologies were derived by Delphi method. Evaluation criteria for the priority setting were decided as 'technology', 'market oriented', and 'public concerns' by council. The future core technologies were divided as four groups by importance and R&D level. Technologies in upper two groups were considered in the study. Group I had high importance and high R&D level. Group II had high importance and lower R&D level. Questionnaires were given to 9 specialists in agricultural resources. As the results, 'public concerns' was decided as a most important evaluation criterion. The most important technologies are "technology developing for animal feces and urine treatment, and restoration it to farm land" in group I, and "technology developing for agricultural by-products as energy source" in group II.

• 한국운동역학회지
• /
• 제28권2호
• /
• pp.119-125
• /
• 2018

Objective: The purpose of this study was to compare the effect of different 12-week exercise programs for posture correction on postural alignment in elderly women. Method: The study included 36 elderly women who were randomly divided into 3 groups: Group A (core exercise, n=12), Group B (combined exercise, n=12), and Group C (Pilates exercise, n=12). Postural alignment was measured using 6 variables in frontal and sagittal planes. Two-way mixed analysis of variance was used to compare the effect of exercise program types on postural alignment and a paired t-test was used to compare differences in postural alignment after exercise. Results: The core exercise group showed statistically significant improvement (p<.05) in multiple upper and lower body postural alignment measurements. The combined exercise and Pilates exercise groups showed statistically significant improvement (p<.05) in upper body measurements alone. Conclusion: Core exercise, combined exercise, and Pilates exercise improved postural alignment in elderly woman through improvement in muscle strength and ligament flexibility around the spine and pelvis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2492-2512
• /
• 2018

Multicast communication can effectively reduce network resources consumption in contrast with unicast. With the advent of SDN, current researches on multicast traffic are mainly conducted in the SDN scenario, thus to mitigate the problems of IP multicast such as the unavoidable difficulty in traffic engineering and high security risk. However, migration to SDN cannot be achieved in one step, hybrid SDN emerges as a transitional networking form for ISP network. In hybrid SDN, for acquiring similar TE and security performance as in SDN multicast, we redirect every multicast traffic to an appropriate SDN node before reaching the destinations of the multicast group, thus to build up a core-based multicast tree substantially which is first introduced in CBT. Based on the core SDN node, it is possible to realize dynamic control over the routing paths to benefit traffic engineering (TE), while multicast traffic manageability can also be obtained, e.g., access control and middlebox-supported network services. On top of that, multiple core-based multicast trees are constructed for each multicast group by fully taking advantage of the routing flexibility of SDN nodes, in order to further enhance the TE performance. The multicast routing and splitting (MRS) algorithm is proposed whereby we jointly and efficiently determine an appropriate core SDN node for each group, as well as optimizing the traffic splitting fractions for the corresponding multiple core-based trees to minimize the maximum link utilization. We conduct simulations with different SDN deployment rate in real network topologies. The results indicate that, when 40% of the SDN switches are deployed in HSDN as well as calculating 2 trees for each group, HSDN multicast adopting MRS algorithm can obtain a comparable TE performance to SDN multicast.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.291-298
• /
• 2014

This paper concerns estimating uncertainties of the core neutronics design parameters of power reactors by direct sampling method (DSM) calculations based on the two-step McCARD/MASTER design system in which McCARD is used to generate the fuel assembly (FA) homogenized few group constants (FGCs) while MASTER is used to conduct the core neutronics design computation. It presents an extended application of the uncertainty propagation analysis method originally designed for uncertainty quantification of the FA FGCs as a way to produce the covariances between the FGCs of any pair of FAs comprising the core, or the covariance matrix of the FA FGCs required for random sampling of the FA FGCs input sets into direct sampling core calculations by MASTER. For illustrative purposes, the uncertainties of core design parameters such as the effective multiplication factor ($k_{eff}$), normalized FA power densities, power peaking factors, etc. for the beginning of life (BOL) core of Yonggwang nuclear unit 4 (YGN4) at the hot zero power and all rods out are estimated by the McCARD/MASTER-based DSM computations. The results are compared with those from the uncertainty propagation analysis method based on the McCARD-predicted sensitivity coefficients of nuclear design parameters and the cross section covariance data.

• 한국치위생학회지
• /
• 제18권6호
• /
• pp.1037-1045
• /
• 2018

Objectives: The purpose of this study was to evaluation the effect of translucency on CAD/CAM ceramic according to different core/veneer thicknesses. Methods: A total of 42 samples from 2 groups of 7 ceramic cores, each with 3 thickness values (0.8, 1.0, 1.2 mm) were manufactured. The veneers were also manufactured in 3 thicknesses (0.3, 0.5, 0.7 mm). The group names were based on the name of the ceramic core (IPS e.Max CAD; LD, and IPS Empress CAD; LR). The associated number was determined by the combined thickness of the core and veneer: 1 = (0.8 + 0.7); 2 = (1.0 + 0.5); 3 = (1.2 + 0.3). The translucency was measured using a spectrophotometer and defined via the contrast ratio (CR) and translucency parameter (TP). Two-way ANOVA was performed to compare the 2 groups (material and thickness). Results: As the core thickness increased, the TP value also increased, and the CR value (for LR group) decreased. The results of 2-way ANOVA demonstrated that the thicknesses of different core/veneer combinations significantly affected the translucency (p<0.05). Conclusions: The different core and veneer thicknesses affected the translucency of CAD/CAM ceramic.