• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.25-26
• /
• 2023

The internal core material and external color of a sandwich panel have a significant impact on the performance of the sandwich panel. For use on roofs and walls, the internal core material and external color must be considered. Therefore, the surface and back side temperatures were measured for each exterior color and inner core material type. For the internal core materials, urethane foam and Expanded Poly Styrene(EPS), which are core materials mainly used in sandwich panels, were selected. As colors, black and ivory were selected according to brightness, and a total of five colors were selected: red, blue, and green, which are the three primary colors of light. As a result, there were differences in surface and temperature depending on the external color and type of internal core material. Regardless of the color, the temperature was measured lower for panels with urethane foam than for panels with an internal core of EPS. This is believed to have been influenced by the difference in thermal conductivity of urethane foam being 0.023W/(m·K) and that of EPS being 0.032W/(m·K). In addition, panels with a black exterior color were found to have higher surface and back temperatures than panels of other colors, and ivory-colored panels had lower back temperatures regardless of the core material. This is proportional to the brightness and light-absorbing characteristics.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.43-52
• /
• 2020

Purpose : The aim of this study was to investigate the change of the respiratory function of chronic low back pain patients after the thoracic manipulation and the trunk stability exercise on chronic low back pain patients. Methods : For this study, the group of the experiment was consisted of 44 patients suffering from the low back pain chronically. The participants were divided into two groups: the control group, which was assigned for core stabilization exercise (CSE), and the experimental group, which was randomly assigned for core stabilization exercise after thoracic manipulation (CSE+TM). Both groups carried out each assigned treatment on three times a week for 8 weeks. To study the change related to measurement variable from each test groups before and after intervention, paired t-test was performed. Further, the statistics for an intergroup comparison was analyzed by covariance analysis, ANCOVA. The measurement was conducted by the respiratory function, the respiratory function was measured by forced vital capacity (FVC) and forced expiratory volume in one second (FEV₁). Results : As a result, forced vital capacity (FVC) and forced expiratory volume in one second (FEV₁) showed significant differences not only by each groups but also between those groups before and after the test. Conclusion : In conclusion, both experiments, the core stabilization exercise and the core stabilization exercise conducted after thoracic manipulation, on chronic low back pain patients resulted in the significant level of difference in the respiratory function. This result indicates that the thoracic manipulation is an efficient treatment for improving the respiratory function for chronic low back pain patients.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.206.2-206.2
• /
• 2005

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.4
• /
• pp.31-34
• /
• 2021

Purpose: The purpose of this study is to review health-care program using the recent robotic horse-riding technology and its clinical effects for chronic low back pain. Research design, data and methodology: Recent clinical articles were determined under three inclusion criteria for in-depth review: 1) article that is published within 1 year, 2) article that includes the detailed explanation of health-care program using robotic horse-riding, 3) the article that deals with chronic low back pain during more than 6 months. Results: As a result, the finally-determined two articles demonstrated the clinical effects of robotic horse-riding statistically on pain intensity, low back muscle strength, spinal alignment, and fear-avoidance belief. Conclusions: After in-depth review, I concluded that health-care program using robotic horse-riding for chronic low back pain needs to be provided at low-intensity (e.g. less than 6km/h horse walking program) in the beginning of health-care for improving their motor control ability, then, at the increased intensity for strengthening core muscles.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• The Journal of Korean Physical Therapy
• /
• v.31 no.4
• /
• pp.216-221
• /
• 2019

Purpose: This study examined the effect of visual feedback squat on the core muscle thickness of young adults experiencing back pain. Methods: Thirty adult men and women who experienced back pain were assigned randomly to 15 members of the visual feedback squat group (VSG) and 15 of the normal squat group (NSG) to train three times a week for a total of eight weeks. The core muscle thickness was compared prior to the test for four weeks and eight weeks after the test by dividing it into warm-up exercise, main exercise, and 10 minutes finishing exercise. Before, and four weeks and eight weeks later, the thickness of the core muscle was compared using an ultrasonic imaging system. Repeated measured ANOVA was performed to compare the groups, and a Bonferroni test was performed as a post-hoc test to assess the significance of the timing of the measurements in each group according to the periods. An independent t-test was conducted to test the significance between the groups according to the measurement points. Results: A significant change in the main effects of time and interactions of the time difference in muscle thickness of transvers abdominis were observed between the visual feedback squat and control groups according to the measurement point (p<0.05). No significant difference in the muscle thickness of both muscles was observed between the groups with the exception of the right abdominis (p>0.05). Conclusion: These findings suggest that visual feedback squat exercise is expected to have positive effects on the development of transverse abdominis in core muscles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.67-74
• /
• 2009

Injection molding have been used for manufacturing various fields of automotive interior trims for years. The demands on the injection molding technique are grown with the further development of the automobile technique and the design presentations for cost reduction and environment-friendly. This paper shows that multi-component injection conditions are different from general injection, also shows how to optimize part design and mold design and how to manufacturing through the efficient use of multi-component injection in development process using core back system. To fulfill this purpose, all influential process parameters related to the quality of automobile parts were analyzed in terms of the correlation between them. Base on that, a innovative process will be developed by injection engineers to implement it in practice.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.2
• /
• pp.14-19
• /
• 2022

Background: Plank exercise (PE) is an effective exercise to enhance lower back stability by strengthening the core and lower limb muscles. However, in patients with a shortened hamstring muscle (HAM), PE may cause abnormal movement of the pelvis and lower back due to HAM hyperactivity. Therefore, the objective of this study was to investigate the effects of PE on the core muscles and HAM in subjects with a shortened HAM. Design: Cross-sectional study. Methods: Subjects were divided into a normal length of HAM group (NHG; 9 subjects) and a shortened length of HAM group (SHG; 14 subjects). The activities of the erector spinae (ES), rectus abdominis (RA), external oblique (EO), and HAM muscles were measured using surface electromyography. Results: The results showed that RA, EO, and ES muscle activities were higher in the NHG than in the SHG; however, no significant differences were detected. Conclusion: HAM activity was significantly higher in the SHG than in the NHG. In subjects with a shortened HAM, PE may hyperactivate the HAM, adversely affecting the pelvis and lower back.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.278-285
• /
• 1994

Aging test was done by loading back method for 20kVA amorphous core transformers manufactured by Hyosung Industries Co. and korea Electric Power Corporation. Iron losses, copper losses and insulation oil temperatures of the transfromers was measured for all the testing period. Expected life of amorphous core transformers on the basis of the degradation of the insulators was 46 years at 100% load, and 2.4 years at 130% load. Average temperature rising of transformer oil of amorphous core transformers was higher than that of silicon steel core transformers. Hence lowering the oil temperature by optimized design is needed for improving the expected life of the amorphous transformers.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.25 no.2
• /
• pp.47-56
• /
• 2019

Background: The purpose of this study was compare and analyze the Cobb's angle, core muscle strengthening in adolescents with idiopathic scoliosis and provide scientific basis for effectively treating idiopathic scoliosis in the future. Methods: The subjects of this study were 20 members of adolescent girls. Measurement tools were comprised Cobb's angle test, core muscle strengthening test. After 8 weeks of program, both groups had the same measurements as before program start. Results: The results of the study are as follows. First, the experimental group was decreased statistically significantly in Cobb's angle than the control group. Second, Both groups were increased statistically significantly in core muscle strengthening. The experimental group was increased statistically significantly direction in front, back l than the control group. Conclusion: Sling exercise with core exercise was effective in the decrease of Cobb's angle and core muscle strength than general scoliosis exercise in adolescents with idiopathic scoliosis.