• 대한수의학회지
• /
• 제37권1호
• /
• pp.203-212
• /
• 1997

Antibacterial efficacy and safety of copper sulfate pentahydrate (5% solution) was evaluated in laboratory and field studies for disinfection of some fish bacterial pathogens in cultured fish, flounder(Paralichthys olivaceus), mirror carp(Cyprinus carpio), gold fish(Carrassius auratus) and eel(Anguilla japonica). Dipping of fishes for acute toxicity was performed for a period of 48h, and the TLm value(median tolerance limit) were 4.0ppm in mirror carp and flounder, 4.4ppm in rainbow trout, and 10.0ppm in gold fish. After exposure below than TLm value for 1 month, no side effects and histopathological changes were observed. The test drug were shown high antibacterial activities against most bacterial pathogens by exposure in the laboratory and field trials. However, Aeromonas salmonicida showed a resistance to the dosage. We can prevent outbreaks of bacterial diseases of fish by the dosage of 1ppm for 6hr and the test drug is thought to be used effectively and widely as a disinfectant against most bacterial fish pathogens.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2023

In this study, the influence of pre-treatment(bleaching, mercerization by liquid ammonia and caustic soda) on cotton fabrics were investigated on dyeing Rubia cordifolia extracts. Aluminium Sulfate, Iron(Ⅱ) Sulfate Heptahydrate, Copper(Ⅱ) Sulfate Pentahydrate, Tin(Ⅱ) Sulfate, Manganese(Ⅱ) Chloride Tetrahydrate were used as mordanting agents. K/S value and washing fastnesses of the dyed cotton fabrics pretreated under different conditions were investigated. The K/S values were increased in the order of bleaching, liquid ammonia and mercerization pre-treatment. It was found that the pre-treatment conditions did not significantly affect the color change. The colorfastness to washing of most of all dyed fabrics were over grade 4 regardless of pre-treatment condition.

• 한국재료학회지
• /
• 제32권2호
• /
• pp.80-84
• /
• 2022

Copper nanoparticles (CuNPs) are considered of great importance due to their high catalytic and antimicrobial activities. This study focuses on the preparation and characterization of CuNPs, and on their antibacterial/antifungal activities. A copper salt (copper sulfate pentahydrate) as precursor, starch as stabilizing agent, and ascorbic acid as reducing agent were used to fabricate CuNPs. The resulting product was characterized via different techniques such as X-ray diffractrometry (XRD), Fourier Transform Infrared (FTIR) spectroscopy, and Scanning electron microscopy (SEM) to confirm its characteristic properties. Employing the Scherrer formula, the mean crystallite sizes of copper (Cu) and cuprous oxide (Cu₂O) nanocrystals were found to be 29.21 and 25.33 nm, respectively, as measured from the main X-ray diffraction peaks. The functional groups present in the resulting CuNPs were confirmed by FTIR. In addition, the engineered CuNPs showed antibacterial and antifungal activity against tested pathogenic bacterial and fungal strains.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권11호
• /
• pp.1608-1615
• /
• 2016

This study was conducted to determine the solubility of copper (Cu) in two sources of copper(II) sulfate ($CuSO_4$) including monohydrate and pentahydrate and three sources of dicopper chloride trihydroxide (dCCTH) including ${\alpha}$-form (dCCTH-${\alpha}$), ${\beta}$-form (dCCTH-${\beta}$), and a mixture of ${\alpha}$- and ${\beta}$-form (dCCTH-${\alpha}{\beta}$) at different pH and a 3-step in vitro digestion assay for pigs. In Exp. 1, Cu sources were incubated in water-based buffers at pH 2.0, 3.0, 4.8, and 6.8 for 4 h using a shaking incubator at $39^{\circ}C$. The $CuSO_4$ sources were completely dissolved within 15 min except at pH 6.8. The solubility of Cu in dCCTH-${\alpha}$ was greater (p<0.05) than dCCTH-${\beta}$ but was not different from dCCTH-${\alpha}{\beta}$ during 3-h incubation at pH 2.0 and during 2-h incubation at pH 3.0. At pH 4.8, there were no significant differences in solubility of Cu in dCCTH sources. Copper in dCCTH sources were non-soluble at pH 6.8. In Exp. 2, the solubility of Cu was determined during the 3-step in vitro digestion assay for pigs. All sources of Cu were completely dissolved in step 1 which simulated digestion in the stomach. In Exp. 3, the solubility of Cu in experimental diets including a control diet and diets containing 250 mg/kg of additional Cu from five Cu sources was determined during the in vitro digestion assay. The solubility of Cu in diets containing additional Cu sources were greater (p<0.05) than the control diet in step 1. In conclusion, the solubility of Cu was influenced by pH of digesta but was not different among sources based on the in vitro digestion assay.

• 대한화학회지
• /
• 제57권3호
• /
• pp.357-360
• /
• 2013

Sustainable development is a balance between environment and development. Sustainable development requires sustainable supplies of clean, affordable, and renewable energy sources that do not cause negative impact to the society. This article introduces a green chemistry method to synthesize 2-amino-4H-chromenes that reduces or eliminates the use and generation of hazardous substances in the design, manufacture, and application of chemical products. This method is described using copper (II) sulfate pentahydrate, as a green and reusable catalyst on water. The products were obtained at very good yields, short reaction time, and at lower cost than other reported procedures.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.708-712
• /
• 2015

This study reports the effects of $H_2S$ gas concentration on the properties of $Cu_2ZnSnS_4(CZTS)$ thin films. Specifically, sulfurization process with low $H_2S$ concentrations of 0.05% and 0.1%, along with 5% $H_2S$ gas, was studied. CZTS films were directly synthesized on Mo/Si substrates by chemical bath deposition method using copper sulfate, zinc sulfate heptahydrate, tin chloride dihydrate, and sodium thiosulfate pentahydrate. Smooth CZTS films were grown on substrates at optimized chemical bath deposition condition. The CZTS films sulfurized at low $H_2S$ concentrations of 0.05 % and 0.1% showed very rough and porous film morphology, whereas the film sulfurized at 5% $H_2S$ yielded a very smooth and dense film morphology. The CZTS films were fully crystallized in kesterite crystal form when they were sulfurized at $500^{\circ}C$ for 1 h. The kesterite CZTS film showed a reasonably good room-temperature photoluminescence spectrum that peaked in a range of 1.4 eV to 1.5 eV, consistent with the optimal bandgap for CZTS solar cell applications.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.199-207
• /
• 2020

Recently, as the demand for masks increases, the use of filter-replaceable cotton masks is increasing. A filter-replaceable cotton mask is one of the ways to solve the environmental problems of a disposable nonwoven mask because only the filter can be replaced after washing. Cotton fiber products are known to be environmentally friendly, but cotton products dyed with general synthetic dyes are not safe for humans. In this study, to prepare of cotton mask applied with natural dyeing, the optimal dyeing conditions are set when dyeing with gallnut extract. A polychromatic natural dye that changes color by mordant, and the functionalities of gallnut dyeing fabrics are evaluated. The experimental method is dyed the gallnut by temperature and time by concentration to set the optimal conditions. The color fastness rating grade of aluminium potassium sulfate dodecahydrate, copper(ll) sulfate pentahydrate, and iron(ll) chloride tetrahydrate were evaluated after the pre/post mordanting.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.374.1-374.1
• /
• 2016

Copper and zinc are well known elements with antibacterial effect. So in this research, Cu and Zn (CZ) nanofibers (NFs) were fabricated by electrospinning method using polyvinylpyrrolidone (PVP) for adjusting viscosity. The CZ/PVP precursor solutions were prepared with copper sulfate pentahydrate, and zinc acetate dihydrate. Distilled water was used for solvent and PVP was used to regulate the viscosity of precursor solution. The CZ/PVP NF composites were obtained by electrospinning method using the precursor solution. The average diameter of obtained CZ/PVP NFs was determined by optical microscopy using Motic image plus 2.0 program and was found to be 490 nm. The chemical environment of the obtained CZ/PVP NF composites was investigated with X-ray photoelectron spectroscopy (XPS). After heating the obtained CZ/PVP NF composites at 353 K, the solvent was removed. The characteristic C 1s, Cu 2p, and Zn 2p core level XPS peaks were observed. After calcination the CZ/PVP NF composites at 873 K in Ar environment for 5 hrs, PVP was decomposed at this temperature and CZ NF was obtained. This was confirmed by decreasing the intensity of C 1s.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.121-121
• /
• 2012

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordant effect of Hwangsu spring was analyzed by pH, temperature, trace elements and organic matter. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, 2011, in Yeongcheon(Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. The Result of ICP analysis, it contain bned Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm). Dyeing and post-mordant procedure; Fabrics(cotton, silk, rayon) were dyed with natural colorants(Sopbora Japonica L., Caesalpinia sappan L., Allium cepa L.) for 20 min at $80^{\circ}C$. Hwangsu spring, aluminium sulfate $14-18H_2O(Al_2(SO_4)_3{\cdot}14-18H_2O)$, iron sulfate peptahydrate($FeSO_4{\cdot}7H_2O$), copper sulfate pentahydrate($CuSO_4{\cdot}5H_2O$) were used by post mordants. But in the case of Caesalpinia sappan L. was dyed after pre-mordanting with Al(II). The fabrics were dyed with each mordant solutions at $25^{\circ}C$ for 10min. The colorless also was measured by color-differnce meter. Comparison with a synthetic mordants, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• 복식문화연구
• /
• 제16권1호
• /
• pp.158-165
• /
• 2008

The purpose of this study was to investigate the dyeing property and ultraviolet-cut ability on silk 100% and nylon 100% fabrics dyed with Rhus verniciflua extracts. This study was investigated K/S values, surface color, washing fastness, dry cleaning fastness and ultraviolet-cut ability of the silk and nylon fabrics dyed with Rhus verniciflua extracts under the various dyeing conditions. As mordanting were used Tin(II) Chloride dihydrate $(SnCl_2{\cdot}2H_2O)$, Copper(II) sulfate pentahydrate$(CuSO_5{\cdot}5H_2O)$, Iron(II)Chloride$(FeC_2{\cdot}4H_2O)$. pH was adjusted by sodium carbonate$(Na_2CO_3)$ and formic acid(HCOOH). The optimum dyeing temperature, dyeing time, and pH of the silk fabrics dyed with Rhus verniciflua extracts were $90^{\circ}C$, 100min, and in the nylon fabrics were $90^{\circ}C$, 45min. It were colored(munsell value) 6.4Y 7.5/4.1 in the silk fabrics and colored 4.3Y 6.6/5.9 in the nylon fabrics dyed with Rhus verniciflua extracts. Washing fastness and dry-cleaning fastness in the silk and nylon fabrics dyed with mordanting agent improved in $4{\sim}5$ grade. UV-A test showed that nylon fabrics a high rate of 92% with Rhus verniciflua extracts.