• Journal of Oral Medicine and Pain
• /
• v.42 no.4
• /
• pp.102-108
• /
• 2017

Purpose: Many metal ions released from dental casting alloys have been reported to influence the intraoral symptoms of oral lichen planus (OLP) and burning mouth syndrome (BMS). The aim of this study was to investigate the relationship between salivary metal ion levels and the prosthetic duration as well as to evaluate the time-dependent morbid effects of metal ions in OLP and BMS patients. Methods: Three study groups consist of the following subjects respectively: 17 OLP patients, 12 BMS patients, and 12 patients without oral symptoms. The salivary concentrations of 13 metal ions (copper, cobalt, zinc, chromium, nickel, aluminum, silver, iron, titanium [Ti], platinum, tin, palladium, and gold) were measured by Laser Ablation Microprobe Inductively coupled Plasma Mass Spectrometry. Results: The Ti ions had statistically significant differences among the groups with a prosthetic duration of less than 5 years. There were no significant differences between all ion levels among the groups wearing dental cast alloys for over 5 years. In the BMS group, the level of Ti ions in patients with prosthetic restorations less than 5 years old were significantly high (p<0.05). Conclusions: In the BMS group, 3-60 months during which salivary Ti levels were higher were matched with the duration of burning symptoms ($15.6{\pm}17.1months$). Furthermore, Ti ions were statistically high in the oral cavity of BMS patients fitted with dental casting alloys for 5 years. These results suggest that Ti ions released from dental implants and oral prostheses could attribute to burning sensation of BMS.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.574-578
• /
• 1998

Electrochemical Ion Exchang(EIX) electrode containing Amberlite IRP-64 as a cation ion exchange resin and Stylene-Buthylene-Rubber(SBR) as a binder was fabricated by the compressed diecasting method. The adsorption and elution characteristics in copper sulfate solution were investigated at the various electrode potentials and electrolyte pHs. In the adsorption process, it was found that the maximum adsorption rate of copper was obtained at -1800 mV and the ratio of adsorption was 92% during 90 min. In the elution process, the elution rate of copper was increased in proportion to anodic potential in the present experimental range and the ratio of elution was 88% during 50 mins at 3600 mV. The adsorption and elution processes were significantly affected by the variation of local pH in the vicinity of electrochemical ion exchange electrode. The higher performances of adsorption and elution were elution were obtained at basic and acidic eletrolytes.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.782-788
• /
• 2018

Submicron copper-silver core-shell (Cu@Ag) particles were synthesized using the sonochemical combined transmetallation reaction and the application to printed electronics as a low cost conductive paste was evaluated. $Cu_2O$ of the $Cu_2O/Cu$ composite used as a core in the reaction for the synthesis of core-shell was sonochemically reduced to Cu, and Cu atoms functioned as a reducer for silver ions in transmetallation to achieve the copper-silver core-shell structure. The characterization of submicron particles by TEM-EDS and TG-DSC confirmed the core-shell structure. Conductive pastes in which 70 wt% Cu@Ag was dispersed in solvents were prepared using a binder and wetting agents, and coated on the polyamide film using a screen-printing method. Printed paste films containing synthesized Cu@Ag particles with 8 at% and 16 at% Ag exhibited low resistivity of 96.2 and $38.4{\mu}{\Omega}cm$ after sintering at $180^{\circ}C$ in air, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.189-196
• /
• 2007

The purpose of this study was to analyze steel corrosion resistance of concrete containing copper slag. The specimens were made with normal portland cement and pozzolan materials with various replacement ratio and with W/B ratio ranging from 35% to 55%. Compressive strength, coefficient of chloride diffusion, corrosion area ratio and weight reduction ratio were determinated for the test. The results show that the concrete with pozzolan materials is superior resistant to chloride ions compared to the concrete without pozzolan materials. It was observed that blast furnace slag replacement ratio of 20% gives the best results with respect to chloride ion penetration and corrosion tests and observed that copper slag replacement ratio of 10% gives the seperior resistance compared to normal concrete.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.644-650
• /
• 2016

In soil-to-plant transfer of heavy metals, the amount absorbed and accumulated varies depending on the environment conditions. The absorption rate of cadmium (Cd) in plants differs considerably depending on the bioavailability of Cd in the soil, while usage by various organic matters is also reported to affect absorption patterns. Therefore, this study aimed to identify the difference in the transfer of essential metal ions and Cd to various plant parts when rice straw compost was used to cultivate soybean (Glycine max L. cv. Daepung). In the two-leaf stage of soybean cultivated in a greenhouse, Cd was mixed in the soil, after which the Cd and essential metal ions contents, and physiological changes of soybean seedlings were studied on the 15th and 25th day. The Cd toxicity in the plant was reduced with the use of rice straw compost. Further, the Cd content varied with the plant part, and was higher in young leaves (3rd and 4th leaf) than in the stem. When analyzed by leaf age, the Cd transfer was highest in young leaves (3rd and 4th leaf), followed by mature leaves (1st and 2nd leaf). While there was no significant difference between plant tissues in the absorption rate of copper (Cu) and zinc (Zn) when rice straw compost was used against Cd toxicity, the absorption rate of manganese (Mn) and iron (Fe) showed a significant decline in both the control and rice straw compost treatment conditions, as well as a significant difference between leaf ages. Therefore, these results confirm that the use of rice straw compost against Cd toxicity is effective, and implies that the rate of Cd transfer in the soybean plant varies significantly with leaf age.

• Journal of Environmental Science International
• /
• v.25 no.12
• /
• pp.1623-1632
• /
• 2016

Zeolite (FZ) prepared using coal fly ash from an Ulsan industrial complex was immobilized with polysulfone (PS) to fabricate PS-FZ beads. The prepared PS-FZ beads were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The optimum ratio for preparing PS-FZ beads was 1 g of PS to 2 g of FZ. The removal efficiencies of Sr and Cu ions by the PS-FZ beads increased as the solution pH increased and nearly reached a plateau at pH 4. A pseudo-second-order model morel fit the adsorption kinetics of both ions by the PS-FZ beads better than a pseudo-first-order model. The Langmuir isotherm model fit the equilibrium data well. The maximum adsorption capacities calculated from the Langmuir isotherm model were 46.73 mg/g and 62.54 mg/g for the Sr and Cu ions, respectively. Additionally, the values of thermodynamic parameters such as free energy (${\Delta}G^{\circ}$), enthalpy (${\Delta}H^{\circ}$) and entropy (${\Delta}S^{\circ}$) were determined. The results implied that the prepared PS-FZ beads could be interesting an alternative material for Sr and Cu ion removal.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.123-127
• /
• 1995

$CuFe_{2}O_{4}$ was accomplished by chemical rrethod and the crystallographic and magnetic properties have been studied by $M\"{o}ssbauer$ spectroscopy and X-ray diffraction. The slowly cooled sample is found to have a tetragonal spinel structure with the lattice constant $a=8.26{\pm}0.05{\AA},\;c=8.75{{\pm}}0.05{\AA}$. The $M\"{o}ssbauer$ spectra between the room temperature to the Curie temperature show that the $Cu_{2+}$ ions at octahedral site have the Jahn-Teller effect and the sample exhibits a structural phase transition near 630K due to the Jahn-Teller effect. The Curie temperature is found to be 690K and it is lower than that of ceramic method.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1495-1500
• /
• 2014

Two new complexes with 5-methyl-1-(pyridine-3-yl)-1H-1,2,3-triazole-4-carboxylic acid (Hmptc) ligand: [$Cd(mptc)_2(H_2O)_4$] (1) and $[Cu(mptc)_4{\cdot}2H_2O]_n$ (2) were prepared and their crystal structures were determined by single crystal X-ray diffraction analyses. In complex 1, the Cd(II) ions coordinates with the pyridyl nitogen atom from the Hmptc ligand, forming a mononuclear Cd(II) compound. Complex 2 exhibits a novel two-dimensional (2D) polymer in which four Hmptc ligands stabilize the Cu(II) atom. And the coordination involves one nitrogen atom of the triazole, one oxygen atom of the carboxylic acid and the pyridyl nitrogen atom. In addition, FT-IR and solid-state fluorescent emission spectroscopy of two compounds have been determined.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.148-154
• /
• 2008

A simple and fast method for extraction and determination of trace amounts of copper(II) ions using octadecyl-bonded silica membrane disks modified with 2-propylpiperidine-1-carbodithioate (PPCD)I and atomic absorption spectrometry (AAS) is introduced. Extraction efficiency and the influence of flow rates, pH, and type and smallest amount of stripping acid were investigated. Maximum capacity of the membrane disks modified with 2 mg of the anthraquinone derivative used was found to be 425μg Cu2+. The limit of detection of the proposed method is 7 ng/ml. The method is applied to the recovery of Cu2+ from different synthetic samples and a spring water sample.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.9
• /
• pp.2731-2736
• /
• 2013

We report a new tetrameric supramolecular Cu(II) complex ($Cu_4L_4$ = tetrakis(N,N'-bis(salicylidene)-2,2'-ethylenedianiline)Copper(II)) with a Schiff-base ligand ($H_2L$ = N,N'-bis (salicylaldimine)-1,2-ethylenediamine) containing two N,O-bidentate chelate groups. Though the copper sites of $Cu_4L_4$ are non-coupled, the complex exhibits a unsually high catecholase-like activity ($k_{cat}=935h^{-1}$) when the $Cu_4L_4$ solution is treated with 3,5-di-tert-butylcatechol (3,5-DTBC) at basic condition in the presence of air. Combined information obtained from UV-VIS and EPR measurements could lead the suggestion of the reaction pathway in which the substrate may bind to Cu(II) ions by anti-anti didentate bridging mode.