• Title/Summary/Keyword: copper database

Search Result 26, Processing Time 0.025 seconds

Preparation of Copper Database of Korean Foods and Copper Nutritional Status of Korean Adults Living in Rural Area Assessed by Dietary Intake and Serum Analysis (한국인 상용 식품의 구리영양가표작성과 식이섭취 및 혈청분석에 의한 한국농촌성인의 구리영양상태 평가)

  • 정효지
    • Journal of Nutrition and Health
    • /
    • v.32 no.3
    • /
    • pp.296-306
    • /
    • 1999
  • This study was carried out to prepare a copper database of Korean foods which can be used in calculating copper intake from dietary data, and to evaluate the copper nutritional status of Koran adults living in rural areas by dietary intake and serum copper concentrations. A copper database for 1,176 Korean foods was constructed (1) by analysing 112 Korean foods which are frequently consumed by Korean adults living in rural areas, (2) by adapting values form food composition databases from other countries-320 items from the University of Minnesota database, 201 items from the USAD database, and 25 items from U.K. database, and (3) by imputing values from similar foods for 518 food items. Copper intake of 2,034 Korean adults over the age of 30 living in Yeonchongun was Kyunggi province, Korea was estimated by 24-hour recall method. Mean daily copper intake of subjects was 0.98mg. Mean daily intake level of males was 1.11mg which was significantly higher than that of females, 0.88mg. There was a significant difference in the distribution of subjects by the level of copper intake and sex(p<0.05). Mean serum copper concentration was 14.8umol/1 and the percentage of subjects with low, adequate, and high levels of copper concentration were 23.9%, 69.4%, and 6.6%, respectively. The two food groups which contributed most to the dietary copper intake of subjects were cereals and grain products, and vegetables, supplying 46.2% and 12.7% of total copper intake, respectively. Individuallym, rice contributed most, suppling 31% of total copper intake, followed by soybean curd, starch vermicle, barley, etc. Plant foods contributed to 82.1% of the total copper intake. In summary, results of this study show that copper intake of Korean adults living in rural areas is low, and that dietary sources of copper are mainly plant foods. Serum levels of copper in the subjects were relatively normal. The copper database for Korean foods constructed in present study will be a valuable tool for the as-yet limited assessment of copper intake of Koreans. Such studies will contribute to the establishment of a dietary of a dietary allowance of copper and the relationship of copper nutriture and chronic diseases in Koreans.

  • PDF

Evaluation of Zinc and Copper Status in Korean College Women (일부 여대생의 구리와 아연 영양상태 평가)

  • 김정혜
    • Journal of Nutrition and Health
    • /
    • v.32 no.3
    • /
    • pp.277-286
    • /
    • 1999
  • This study was conducted to assess dietary intake and nutritional status of zinc and copper in Korean college women. Dietary survey was conducted by 24-hour recall method and fasting serum samples were collected from 111 apparently healthy subjects. Intake levels of zinc and copper were calculated using newly developed database for Zn & Cu of Korea food. Serum levels of Zn, Cu and activities of ALP, EC-SOD were measured from fasting serum sample. Mean daily zinc and copper intakes were 6.72mg/day(56.0% RDA) and 1.11mg/day respectively. Mean values of serum ALP activity, zinc and copper concentration were 43.9U/L, 14.8umol/1, 15.5umol/1and these values were mostly within normal range. EC-SOD activitis of the subjects were low and had no correlation with intake or serum levels of Zn, Cu. In conclusion, these results show that zinc and copper intake of Koran college women are lower than those from other counties but higher than those of adults in rural area of Korea. Their serum levels of Zn, Cu, ALP are relatively normal. These results indicate that marginal deficiency of Zn and Cu may be quite prevalent in these subjects but serum indicators measured may not be sensitive enough to detect such marginal deficiency. Further study in needed to develop a biochemical index sensitive enough to evaluate Zn and Cu status.

  • PDF

1D-Coordination Polymer Formed by Structural Conversion of an Oxazolidine Ligand in Reaction with the Copper(II) Halides

  • Mardani, Zahra;Golsanamlou, Vali;Jabbarzadeh, Zahra;Moeini, Keyvan;Carpenter-Warren, Cameron;Slawin, Alexandra M.Z.;Woollins, J. Derek
    • Journal of the Korean Chemical Society
    • /
    • v.62 no.5
    • /
    • pp.372-376
    • /
    • 2018
  • A 1D-coordination polymer of $1D-\{Cu({\mu}-picolinato)_2\}$ $\{Hakimi,\;2012\;\sharp73\}_n$ (1), was prepared by the reactions between 2-(2-(pyridin-2-yl)oxazolidin-3-yl)ethanol (AEPC) ligand and $CuCl_2$ or $CuBr_2$. The product was characterized by elemental analysis, UV-Vis, FT-IR spectroscopy and single-crystal X-ray diffraction. The X-ray analysis results revealed that the AEPC ligand, after reactions with the copper(II) chloride or bromide, gives the same product - $1D-\{Cu({\mu}-picolinato)_2\}_n$ (1). The coordination modes for various picolinate-based ligands were extracted from the Cambridge Structural Database (CSD). In the crystal structure of 1, the copper atom has a $CuN_2O_4$ environment and octahedral geometry, which is distorted by elongation of the axial bond lengths due to the Jahn-Teller effect.

Comparative Genomics Platform and Phylogenetic Analysis of Fungal Laccases and Multi-Copper Oxidases

  • Wu, Jiayao;Choi, Jaeyoung;Asiegbu, Fred O.;Lee, Yong-Hwan
    • Mycobiology
    • /
    • v.48 no.5
    • /
    • pp.373-382
    • /
    • 2020
  • Laccases (EC 1.10.3.2), a group of multi-copper oxidases (MCOs), play multiple biological functions and widely exist in many species. Fungal laccases have been extensively studied for their industrial applications, however, there was no database specially focused on fungal laccases. To provide a comparative genomics platform for fungal laccases, we have developed a comparative genomics platform for laccases and MCOs (http://laccase.riceblast.snu.ac. kr/). Based on protein domain profiles of characterized sequences, 3,571 laccases were predicted from 690 genomes including 253 fungi. The number of putative laccases and their properties exhibited dynamic distribution across the taxonomy. A total of 505 laccases from 68 genomes were selected and subjected to phylogenetic analysis. As a result, four clades comprised of nine subclades were phylogenetically grouped by their putative functions and analyzed at the sequence level. Our work would provide a workbench for putative laccases mainly focused on the fungal kingdom as well as a new perspective in the identification and classification of putative laccases and MCOs.

Implementation of Dynamic Resistance Database for Weld Quality Improvement of Inverter Spot Welder (인버터 스폿용접기의 용접품질 향상을 위한 동저항 데이터베이스 구축)

  • 김재문;원충연;최규하;김규식;목형수
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.4 no.3
    • /
    • pp.294-303
    • /
    • 1999
  • Resistance spot welding is commonly used for welding products of high quality because of clean welding and short w welding-time. But. conventional spot welders bring about the depreciation of welding products, iuespective of dynamic r resistance characteristics during welding time. This paper discussed dynamic resistance database implementation in t terms of welding performance improvement. On different welding conditions, we compared dynamic resistance, r respectively, about pure iron and Sn-Pb alloy on Copper. Also, it investigated the relation of tensile shear strength and d dynamic resistance in welded workpiece.

  • PDF

The Characteristics of Arc Scattering and Fusing Current of Copper Wire in the Fault Process DB System of Cables in a PL Environment

  • Kim, Young-Seok;Shong, Kil-Mok;Kim, Sun-Gu
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.3
    • /
    • pp.52-58
    • /
    • 2008
  • The importance of. identifying the causes of electrical faults cannot be overstated because of the accidents caused by over-current that take place at the home, the office and electrical facilities due to misuse, poor products and system faults. It is necessary to gather objective, scientific data pertaining to electrical fault investigation in a product liability(PL) environment. To date, no database(DB) has been built concerning the accurate cause analysis of faultyfacilities. In this paper, accident hazard and arc scattering when over-current flows in copper wire was investigated. It was found that when over-current flows in a copper wire, the copper wire became heated and bent and beads were scattered around the wire with a flash. It was determinedthat the fusing current and time was related to the current rise per second. For example, when the current rise per second was largethe fusing current was higher than when the current rise per second was small, and the beads dispersed along a wide area. Fusing time, however, was shorter. The possibility of electrical fault became highest when the fusing current was higher. As the current rise per second is short, the dendrite structure is distributed in the surface of the copper wire. These experimental results can be utilized for a fault process DB system in the investigation and the prevention of electrical faults.

Dietary Copper Intakes and Nutritional Status of Copper in Serum among Elementary Schoolchildren in Chungnam Province in Korea: Comparison between Remote Rural and Urban Areas (일부 학령기 아동의 구리 섭취량 및 구리 영양 상태에 관한 연구: 충남 벽지농촌과 도시간의 비교)

  • Kim Sun-Hyo
    • Journal of Nutrition and Health
    • /
    • v.39 no.4
    • /
    • pp.381-391
    • /
    • 2006
  • This study is performed to compare the dietary intakes and food sources of copper (Cu) using the database of Cu content developed in this study between the elementary schoolchildren in remote rural areas (RA, n=58, $9.9{\pm}1.7$ yrs) and those in urban area (UA, n=60, $9.4{\pm}1.8$ yrs), and to analyze the relationship between serum Cu concentration and serum antioxidant status in the RA. The results obtained in this study were as followings: 1) Dietary intakes of calorie, calcium and iron in the RA were in the 3/5-4/5 of the Korean RDA while the UA were similar to or more than the Korean RDA, 7th ed. except iron. 2) More than 273 kinds of food consumed by the subjects were analyzed the content of Cu and database of Cu content were developed in the present study. The mean dietary intake of Cu per day in the RA was $0.99{\pm}0.07mg/d$ ($170.0{\pm}13.2%$ of the USA RDA) while it was $1.22{\pm}0.07mg/d$ ($203.4{\pm}13.1%$ of the RDA) in the UA. The percentage of dietary intakes of Cu less than 213 of the RDA was 8.6% in the RA in comparison to 0% in the UA. 3) The RA and the UA consumed more than 80% of total dietary intakes of Cu from plant foods. Thus, the RA and the UA consumed Cu from cooked rice, vegetables and fruits as a major source. However the RA had less Cu from meat and their products than did the UA (p<0.05) .4) Crab stew including crab and juice was the highest food source of Cu for the total subjects, followed by seasoned bud of aralia, cooked; beef rib meat, roasted; soybean paste soup w/mallow; and soybean paste soup w/mallow & beef. Major food source of Cu was similar for the RA and the UA such as cooked rice, vegetables and fruits. 5) Mean concentration of serum Cu in the RA was $18.1{\pm}0.7{\mu}M/L$ that was in the normal value, and all subjects in this group were in more than normal value. In the RA serum Cu concentration related positively with serum ceruloplasmin concentration, serum vitamin C concentration and EC SOD activity, respectively. However, serum Cu concentration did not relate with serum TBARS concentration in the RA. Above results showed that the RA had good status of Cu nutrition based upon dietary intake and serum concentration, however some of the RA had lower intake of Cu than the RDA. The overall children in the UA had good Cu nutrition. Therefore, the subgroup of the RA should be supported to improve their Cu nutrition, and this support could give them better antioxidant status based upon positive relationship between serum Cu concentration and serum antioxidant status in the RA.

Measurement Technology of Chamber Impedance for RF Matching (RF 정합 특성 개선을 위한 챔버의 임피던스 측정법)

  • 설용태;이의용;박성진
    • Journal of the Semiconductor & Display Technology
    • /
    • v.2 no.4
    • /
    • pp.13-17
    • /
    • 2003
  • An adaptor is designed for chamber impedance measurement of plasma process. Copper rod, fixed board and compensation circuit are the major components of the adaptor. An adaptor can be to measure chamber impedance on time unless stopping a process and Data to measure can do the database. We can use it to a criteria data for a failure diagnosis. So developed adaptor could be used for diagnosis the plasma process chamber in semiconductor industry.

  • PDF

Relationship between Mn Nodule Abundance and Other Geological Factors in the Northeastern Pacific: Application of GIS and Probability Method

  • Ko, Young-Tak;Lee, Sa-Ro;Kim, Jong-Uk;Kim, Ki-Hyune;Jung, Mee-Sook
    • Ocean Science Journal
    • /
    • v.41 no.3
    • /
    • pp.149-161
    • /
    • 2006
  • The aims of this study are 1) to construct a database using geostatistics and Geographic Information System (GIS), and 2) to derive the spatial relationships between manganese nodule abundance and other geological factors such as metal grade, slope, water depth, topography, and acoustic characteristics of the sub-bottom. Using GIS, it is possible to analyze a large amount of data efficiently, and to maximize the practical application, to increase specialization, and to enhance the accuracy of the analyses. The greater the copper and nickel grade, the higher the rating. The distribution pattern of nickel grade is similar to that of copper grade. The slopes are generally less than $3^{\circ}$ except for seamounts and cliff areas. The rating shows no correlation with slope. The rating is highest for slopes between 2.5 and $3.5^{\circ}$ in block N1 and between 4.0 and $4.5^{\circ}$ in block N3. The topography is classified into five groups: seamount, hill crest, hill slant, hill base or plain, and seafloor basin or valley. The rating proves lowest for seamount and hill crest. Our results show that the rating increases with the water depth in the study area. Nodule abundance dose not show any significant relationship with the thickness of the upper transparent layer in the study area.

Development of Theme Park Management Automation System Using RFID (RFID를 이용한 공원관리 자동화 시스템 개발 연구)

  • Lee, Yang-Weon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.4
    • /
    • pp.871-876
    • /
    • 2005
  • Theme park automation system is developed by using the RFID sensor reader, IIS web server, ASP.NET and MSSQL database in this paper. Its operation is that park entrance people checked automatically when he who possessed the ta8 passed the reader acquisition bound and its tag information is sent to the host computer through the RS-232 data acquisition system. Tag information and time data will be stored in the RFID database tables and reused to extract and distribute the entrance people for the purpose of each arrangement of each entertainment devices. First of all, we developed interface program between host and reader and then, programmed the related web site and database connection function using ASP.NET with $C\#$ and MSSQ. We also design and make an production of external Ant. to extend the acquisition range up to $30\~40$ cm using copper PCB plate. We confirmed the performance through the RFID test bed site.