• Journal of Korean Association for Spatial Structures
• /
• v.22 no.4
• /
• pp.71-79
• /
• 2022

Recently, the construction of tall buildings utilized by high strength-concrete in the whole world is tending to be on the rise. The application of high-rise structural system in buildings results in the excellent cut-down effect in construction materials due to section reduction. Therefore, in order to investigate the CO₂ and resource reduction effect for the high-rise structural system, comparisons of GWP and ADP in embodied energy of structural materlais between 4 type of high-rise structural system have been performed. As a result, GWP emission increased in the order of steel structure outrigger system, RC shear wall system, and RC outrigger system. On the other hand, ADP emissions increased in the order of RC shear wall system, RC outrigger system, and steel structure outrigger system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.2
• /
• pp.30-35
• /
• 1992

High quality of turbine babbit bearing has to be maintained for smooth operation of power plants. So in the research center of the Korea Electric Power Company, Ultrasonic testing has been peformed on the spare part of babbit bearing during past ten years. Since separation between babbit bearing and base metal was seen for most of the bearings in stock, investigation has begun in order to see the effect on temperature and humidity variation of the separation, and thus searching for the optimum storage method.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.641-647
• /
• 2005

The partial oxidation of methane is one of important processes for hydrogen production. As a membrane reactor, palladium-silver (Pd-Ag) alloy membrane prepared by electroless plating technique was employed for partial oxidation of methane. The experimental variables were reaction temperature, $O_2/CH_4$ mole ratio, $CH_4$ feed rate, and $N_2$ sweep gas flow rate. The methane conversions increased with the reaction temperatures in the range of 350 to $730^{\circ}C$. The highest methane conversion and CO selectivity were obtained at the condition of $O_2/CH_4$ mole ratio of 0.5 and $730^{\circ}C$ using commercially available nickel/alumina catalyst. The Pd-Ag membrane reactor showed higher methane conversions, 10~40% higher, compared to those in a traditional reactor.

• Journal of Radiation Industry
• /
• v.10 no.4
• /
• pp.231-242
• /
• 2016

This study was conducted to evaluate the synergistic protective effects of mixtures of corn silk, perilla leaf and grape stem extract (CPG mixture) against UVB-induced skin damage and compound 48/80-induced pruritus in mice. The results showed that treatment with CPG mixture exhibited much stronger suppressive effect on erythema and melanin index as well as melanin formation than treatment with ascorbic acid (AA) in UVB-irradiated mice. Moreover, the treatment with CPG mixture showed ameliorative effect on immune cell infiltration and collagen fiber destruction in UV-irradiated mice. The treatment with CPG mixture inhibited glutathione (GSH) depletion, lipid peroxidation and production of pro-inflammatory cytokines in UVB-irradiated mice. Furthermore, the treatment with CPG mixture inhibited compound 48/80-induced scratching behavior and histological changes in mice. Taken together, these results indicated that CPG mixture has potentials as functional and therapeutic materials against skin damage and itch-related skin diseases.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.1
• /
• pp.67-93
• /
• 1991

In general, marine casualities take palace by the composite action of three elements such as waterway condition, vessel condition and man condition. One of the important characteristics of most marie casualties for small cargo vessels in maritime transportation of near-coastal and greater-coasting seas in that the same kind of casualities take place repeatedly in spite of the apprent causes, Because, it takes much time and effort for seamen to master waterway, vessel or operatin technique only to the practical and sensible level. In these days, with the development of our economy, our shiypping industry has grown and therefore the demand of marine officers has increased. This economic growth brought about undesirable situation like the evasion of seamen and frequent casualities of Korea vessels. These marine casualities are being caused mainly by the unskilfulness of operating technique as well as the bad waterway condition and ship's installation condition. Therefore, I conclude, in this paper, that the most efficient and economic preventing measures of marine casualities are seeking causes and removing them in advance under the close coperation system among all concerned parties.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.282-283
• /
• 2015

세계 각국은 에너지 환경, 안보 및 경제에 능동적으로 대처하기 위해 신재생에너지 개발에 국가적 역량을 집중하고 있으며, 그 중 기술의 완성도 및 경제성이 가장 앞서있는 풍력발전 분야의 참여 비중을 점점 확대하고 있는 추세이다. 그러나 풍력에너지 활용의 효율성, 전력의 품질면에서 1~2기 정도의 풍력발전기의 계통연계는 효과적이지 못하기 때문에, 수기에서 수십기의 대용량 풍력발전기로 구성된 대단위 풍력발전단지를 통해 전력을 생산, 공급하는 것이 바람직하다. 따라서, 본 논문에서는 RTDS 시뮬레이터를 이용하여 제주도 한경풍력발전단지의 실시간 시뮬레이션 환경을 구축할 수 있는 3MW급 DFIG 풍력발전기를 모델링하여, 3MW, 5기로 구성된 풍력발전단지를 RTDS를 이용하여 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.280-281
• /
• 2015

DC 그리드가 실현되기 위해서는 이를 둘러싸고 있는 AC 시스템 간의 상호작용에 대한 이해가 필요하며, 차단기의 용량을 결정하거나 차단기를 동작시키기 위한 보호 계전기의 정정 등에 고장 전류값이 사용되기 때문에 사고 발생시 고장 전류에 대한 검토가 필요하다. 따라서, 본 논문에서는 DC 그리드의 내에서의 고장 전류 특성을 파악하기 위해 PSCAD/EMTDC를 이용하여 Point-to-Point VSC HVDC 그리드를 구성하여 Pole 상태 및 고장 종류에 따른 DC 그리드의 고장특성에 대한 연구를 수행하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1731-1733
• /
• 1998

This report is the first intermediate report of a series of field test result of large high voltage motors. Major specimens were 3.3/6.6kV class pump motor that was installed and operated for public water service by KOWACO(KOrea WAter resources COperation). The capacity of specimen motors were in range of several hundred kVA. Until now, we get the 22 field test result by testing technique discribed in IEEE standards and discharge-map technique reported by Japanese engineers. The test result were varied very wide range, and there was a tendency according to insulation material and manufacture.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1224-1231
• /
• 2009

1D Analysis have been using Design of SCP in order to improve the soft ground. But 2D Analysis is researching and developing to get more accurate results. Using 2D Analysis, suitable Numerical Analysis Model should be selected and be tested in many situations. In this study, Laboratory Model Tests are analyzed by Numerical Analysis Method. After selecting Numerical Analysis Model, it is being tested many conditions.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.3-5
• /
• 2005

대규모 기업용 GIS 데이터베이스를 구축하고 운용하기 위한 시스템의 도입이 수년간 꾸준히 진행되어 왔으며 전력분야에서도 전력망 GIS 구축이 활발히 수행되어 현재 현장으로 확장 단계에 있다. 현장 업무를 위하여 전체 도면정보에서 임의의 영역을 추출하여 현장에 활용함으로써 기존의 종이 도면을 대체하고 있는 추세로 정보 통신 기술의 발전으로 현장에서 무선으로 도면 정보를 전송함으로써 필드 GIS라는 사업 분야로 발전하고 있다. 본 연구에서는 시스템간의 직접적인 연동 및 전체 GIS 데이터베이스에서 현장용 설계/공사등의 업무에 필요한 특정 영역내의 설비, 속성, 각 설비간의 관계(Relationship) 및 계통 정보를 추출하여 표준화, 암호화함으로서 현장에서 설계/준공처리 업무를 수행한 후 결과를 본래의 GIS영역 내부로 통합하여 데이터의 무결성을 유지할 수 있는 시스템에 대한 연구로써 기존 매체간의 인터페이스를 통한 시스템간의 불완전한 매핑 문제와 데이터 보안문제를 해결하여 필드 정보시스템(FIS) 분야에 확장, 활용한 수 있는 기술에 대한 연구이다.