• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.213-220
• /
• 2000

Numerical modeling of cut slope has some limits in simulating the real slopes. In the case of 2D analysis of slope stability, it is assumed that slope is simply straight even when it is concave or convex in plan view. In this study, 3D analysis in curved shape slopes has been conducted for the comparison with 2D analysis in terms of failure mode and factor of safety. For this, 3D analysis by FLAC3D was compared with 2D analysis in plane strain condition and axi-symmetric model condition by FLAC. It was also observed how safety factors of slopes were affected by the variation of the tensile strength and cohesion, which are important variables to decide whether the slope fails or not. 2D analysis of concave slopes under plane strain condition showed much smaller safety factors by 16-40 % errors depending on the radius of curvature of slopes, compared to the more realistic values from 3D analysis. In case of convex slopes, the lower values by 7-10 % has been reported. 2D analysis of axi-symmetric model showed also smaller safety factors by 6-10 % and by 2-4 %, in case of concave and convex slopes, respectively. Such results are expected to contribute to the better understanding of failure process and could be applied for improved design of slopes.

• 소성∙가공
• /
• 제24권2호
• /
• pp.77-82
• /
• 2015

By investigating the practical use of trim punch configurations for shearing of vehicle panels, the current study first reviews the shearing angle as part of the shearing die design. Based on this review, four different types of trim punch shapes (i.e., horizontal, slope, convex, and concave type) and shearing angles(i.e., 0.76°, 1.53°, 2.29°, 3.05°, 3.81°) were investigated. In order to conduct shearing experiments, four types of trim punch dies were made. The four trim punch dies were tested under various conditions. The experiments used the four trim punch shapes and the five shearing angles. The shearing force varied by shape and decreased from horizontal, slope, convex, to concave for the same shearing angle. The magnitude of shearing force showed differences between the convex and the concave shapes due to the influence of constrained shearing versus free shearing. The test results showed that compared to the horizontal trim punch shearing force, the decrease of the slope, convex, and concave shearing forces were 22.6% to 60.4%. Based on the results, a pad pressure of over 30% is suggested when designing a shearing die.

• 한국환경복원기술학회지
• /
• 제3권2호
• /
• pp.47-52
• /
• 2000

This study was carried out to analyze the effects of elapsed years and physical properties on fill-slope alignment of forest road. For the study, 21 forest roads in Puy$\check{o}$-gun and Asan-shi of Chungchungnam-do were selected and fifteen factors that might influence on fill-slope alignment were analyzed. The major forms of alignment of the fill-slope in the time of construction were concave and compound. But, with the elapsed years, the concave and compound forms have decreased and linear and convex forms have increased. And fill-slope alignment was strongly related with fill-slope distance, fill-slope gradient and ground gradient among the physical properties.

• 한국광학회지
• /
• 제4권4호
• /
• pp.390-396
• /
• 1993

1차원 telecentric paraxial holographic kinoform을 푸리에변환 렌즈로 사용하는 경우에 있어서, 3가지 표면양각형태, 즉 평면-볼록면, 블록면-평면, 좌우대칭 불록면에 대하여 스넬의 법칙을 기반으로 하는 엄밀한 광성추적법을 적용하여 분석하였다. kinoform은 F/8, 초점거리 15mm이며 kinoform과 그 주변 매질의 굴절율을 변화시키므로써 zone수와 두께 그리고 포물면의 경사도를 변화시켰다. 일반적으로 좌우대칭 볼록면 형태가 가장 좋은 성능을 갖는 것으로 나타났고, 모든 경우에 있어서 포물면의 경사도가 증가함에 따라 입사각의 증가에 따른 성능이 저하되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.239-239
• /
• 2000

This paper present experimental results on temperature trajectory tracking. The benefits of precalculated feedforward input together with PID feedback control are demonstrated by experimental results. To find the feedforward input, the plant (autoregresiive) model is first identified and convex optimization procedure is applied. PID controller is then implemented based on Ziegler-Nickels tuning rule to reduce effects of disturbances and modeling errors. Experimental results show an improvement in slope tracking performance over the fully PID controller.

• 한국환경복원기술학회지
• /
• 제4권2호
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.187-195
• /
• 2023

Intensive rainfall during the summer season in Korea has triggered numerous devastating landslides outside of downtown in mountainous areas. The 2D slope stability analysis that is generally used for cut slopes and embankments is inadequate to model slope failure in mountainous areas. This paper presents a new 3D slope stability formulation using the global sliding vector in the limit equilibrium method, and it uses an ellipsoidal slip surface for static and quasi-static analyses. The slip surface's flexibility of the ellipsoid shape gives a lower FS than the spherical failure shape in the Fellenius, Bishop, and Janbu's simplified methods. The increasing sub-columns of each column tend to increase the FS and converge to a steady value. The symmetrical geometric conditions of the convex turning corners do not indicate symmetrical failure of the surface in 3D analysis. Pseudo-static analysis shows that the horizontal seismic force decreases the FS and increases the mass volume at the critical failure state. The stability index takes the FS and corresponding sliding mass into consideration to assess the potential risk of slope failure in complex mountainous terrain. It is a valuable parameter for selecting a vulnerable area and evaluating the overall risk of slope failure.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.77-98
• /
• 1993

본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1069-1074
• /
• 2009

A sub-domain method for free vibration analysis of arbitrarily shaped, concave membranes with a deep groove is proposed in the paper. The proposed method divides the concave membrane of interest into two convex regions. The vibration displacement(approximate solution) of each convex region is assumed by linearly superposing plane waves generated at edges of the region. A sub-system matrix for each convex region is extracted by applying a provisional boundary condition to the approximate solution. Finally, a system matrix, which of the determinant gives eigenvalues of the concave membrane, is made by considering the fixed boundary condition(displacement zero condition) at edges and the compatibility condition(the condition of continuity in displacement and slope) at the interface between the two regions. Case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed are compared to those by NDIF method, FEM, or the exact method.

• 한국환경복원기술학회지
• /
• 제6권4호
• /
• pp.43-51
• /
• 2003

임도의 절토비탈면의 각 조사구를 토양침식 및 붕괴발생의 발생 유무에 따라 안정구와 불안정구로 구분하고 절토비탈면의 안정에 영향을 미치는 인자를 도출하여 비탈면의 안정성을 평가한 결과는 다음과 같다. 1. 절토비탈면에서 발생한 토양침식량은 표고, 상부(사면위치), 볼록사면(凸), 사면경사, 비탈면길이, 사질식양토(SiL), 남쪽(South)사면과는 정의 상관을, 식생피복도, 평형사면(${\square}$), 미사질식양토(SiCL)와는 부의 상관관계를 보였다. 2. 절토비탈면의 안정성 판별에 대한 상대적 기여도는 식생피복도, 토양경도, 사면경사, 표고, 미사질양토, 볼록사면, 복합사면의 순으로 나타났다. 3. 절토비탈면에서 안정구(2)와 불안정구(1)의 중심값은 각각 -1.194와 1.127로 나타났으며, 이때 판별구분치는 -0.072이었다. 4. 절토비탈면 조사구의 불안정구와 안정구에 대한 판별능력의 적중율은 불안정구는 125개 중 117개가 판별됨으로서 93.6%의 적중율을, 안정구는 117개의 조사구 중 102개를 판별 시켜 87.2%의 적중율을 보였으며 두 그룹의 전체 판별능력은 90.4%였다.