• Journal of Microbiology and Biotechnology
• /
• 제6권5호
• /
• pp.336-339
• /
• 1996

Glutaryl 7-aminocephalosporanic acid acylase of Pseudomonas sp. SY-77-1 was immobilized with oxiran acrylic beads for the production of 7-aminocephalosporanic acid (7-ACA) from glutaryl 7-aminocephalosporanic acid (GL 7-ACA). The immobilized enzyme maintained its activity at a constant level for 7 days, but lost 30$%$ of its activity after 20 days. Optimal reaction conditions for the synthesis of 7-ACA were found to be $30^{\circ}C$ and pH 8.0 using the immobilized enzyme. For the economic production of 7-ACA, substrate and enzyme concentrations were optimized to 60 mM and 0.5 g wet weight per 10 $m\ell$ of reaction volume, respectively. Under optimized conditions, 50 mM 7-ACA was produced from 60mM GL 7-ACA within 8 h, resulting in a conversion yield of 83$%$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2232-2237
• /
• 2007

Steam reforming and catalytic reforming of $CH_4$ conversion to produce synthesis gas require both high temperatures and high pressure. Non-thermal plasma is considered to be a promising technology for the hydrogen rich gas production from methane. In this study, three phase AC GlidArc plasma system was employed to investigate the effects of gas composition, gas flow rate, catalyst reactor temperature and applied electric power on the $CH_4$ and $H_2$ yield and the product distribution. The studied system consisted of three electrode and it connected AC generate power system different voltages. In this study, air was used for the partial oxidation of methane. The results showed that increasing gas flow rate, catalyst reactor temperature, or electric power enhanced $CH_4$ conversion and $H_2$ concentration. The reference conditions were found at a $O_2$/C molar ratio of 0.45, a feed flow rate of 4.9 ${\ell}$/min, and input power of 1kW for the maximum conversions of $CH_4$ with a high selectivity of $H_2$ and a low reactor energy density.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.549-552
• /
• 2004

The thesis describes the design of 12bit digital-to-analog converter (DAC) which shows the conversion rate of 500MHz and the power supply of 3.3V with 0.35${\mu}m$ CMOS 1-poly 4-metal process for advanced wireless transceiver of high speed and high resolution. The proposed DAC employes segmented structure which consists of 6bit MSB, 3bit mSB, 3bit LSB for area efficiency Also, using a optimized aspect ratio of process and new triple diagonal symmetric centroid sequence for high yield and high linearity. The proposed 12bit current mode DAC was employs new deglitch circuit for the decrement of the glitch energy. Simulation results show the conversion rate of 500MHz, and the power dissipation of 85mW at single 3.3V supply voltage. Both DNL and INL are found to be smaller than ${\pm}0.65LSB/{\pm}0.8LSB$.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.35-39
• /
• 2016

In this paper, we develop a 94-GHz single balanced mixer with low conversion loss using planar Schottky diodes on a GaAs substrate. The GaAs Schottky diode has a nanoscale anode with a T-shaped disk that can yield high cutoff frequency characteristics. The fabricated Schottky diode with an anode diameter of 500 nm has a series resistance of 21 Ω, an ideality factor of 1.32, a junction capacitance of 8.03 fF, and a cutoff frequency of 944 GHz. Based on this technology, a 94-GHz single balanced mixer was constructed. The fabricated mixer shows an average conversion loss of -7.58 dB at an RF frequency of 92.5 GHz to 95 GHz and an IF frequency of 500 MHz with an LO power of 7 dBm. The RF-to-LO isolation characteristics were greater than -32 dB. These values are considered to be attributed to superior Schottky diode characteristics.

• Plant Biotechnology Reports
• /
• 제2권3호
• /
• pp.179-189
• /
• 2008

We established an efficient plant regeneration system for Catharanthus roseus L. (G.) Don through somatic embryogenesis. Embryogenic callus was induced from hypocotyl of seed germinated in vitro. Somatic embryogenesis in Catharanthus has been categorized into three distinct stages: (1) initiation and proliferation of embryo; (2) maturation, and; (3) germination or plantlet conversion. Beside plant growth regulators, various stages of embryogenesis were screened for their response to a wide variety of factors (pH, gelrite, light, sugar alcohols, polyethyleneglycol and amino acids), which affect embryogenesis. All of the tested factors had a small to marked influence on embryogeny and eventual conversion to plantlets. The plantlets were acclimatized successfully in a greenhouse. To our knowledge, this is the first report describing a detailed study of various cultural factors which regulate embryogenesis in C. roseus. The results discussed in this paper may be used in mass propagation to produce medicinal raw material, and the embryo precursor cells could be used in genetic modification programmes that aim to improve the alkaloid yield as well.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.303-306
• /
• 2003

To reduce the storage space of spent fuels used at the atomic power plants all over the world, the uranium elements contained in the spent fuels is being extracted and effectively stored. For this, the spent fuel are oxidized and deoxidized. In this study, it is produced conceptual design specification about the spent fuel management technology research and test facilities have been produced. The first considered processes in the facilities is the metal conversion furnace in the dry environment. Since this process is operates at the high temperature range, we have to consider heat-resisting designs for the device. For the heat-resisting designs, we have surveyed and analyzed technical references for material properties. Also, we have determined the temperature distribution condition of the device based on experimental results. We have calculated thermal stress and strain of each devices by the commercial analysis software, I-DEAS. By using the results, we have analyzed design configurations of the point at issue by thermal effects, and suggested alternative design configurations. It is experimented for inspecting confidence rate of heat strain. Based on these results, necessary design specifications for heat-resisting design have been produced.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.123-135
• /
• 2001

Application of growth promoters by means of implantation or supplementation to the diets has been routine in the beef cattle industry of many countries for the better performance in growth and improvement of feed efficiency. Anabolic implants (zeranol, trenbolone acetate, and estradiol with testosterone or progesterone) have generated various positive effects. Zeranol implantation, in general, improved average daily gain (ADG), feed conversion (FC), dressing percentage (DP) and yield grade (YG) of cattle, and increased dry matter intake (DMI). Trenbolone acetate with or without estradiol also increased mean values of ADG and loin eye area (LEA) but reduced DMI and improved FC of cattle. Estradiol with testosterone or progesterone increased ADG and DMI. Anabolic implants, however, had minimal or negative effects on marbling or quality grade. The magnitude of the response to these anabolic implants in performance of beef cattle has varied depending on the type of implants, amount and duration of exposure, age of animals and combination of implants. Administration of bovine somatotropin improved ADG and FC, and decreased fat deposition. Ionophores improved FC in cattle from reduced DMI without great response to ADG. Supplementation of monensin and lasalocid reduced molar proportion of propionate. Monensin and lysocellin increased apparent absorption and retention of some minerals in cattle. Despite the improved cattle performance in growth and FC, results in beef quality from the application of the growth promoters appeared to vary or in conflict under a variety of environmental conditions.

• Fibers and Polymers
• /
• 제2권2호
• /
• pp.108-115
• /
• 2001

Vinyl acetate was polymerized in ultraviolet-ray initiated bulk system at low temperatures using 2,2-azobis(2,4-dimethylvaleronitrile) (ADMVN) or 2,2-azobis(isobutyronitrile) (AIBN) as the photoinitiator, respectively. High molecular weight (HMW) poly(vinyl alcohol) (PVA) having number-average degree of polymerization ($P_n$) of 3,900-7,800 and syndiotactic diad (S-diad) content of 52.5-54.0% could be prepared by complete saponification of synthesized linear poly(vinyl acetate) (PVAc) having $P_n$ 5,900-9,400 obtained at conversion of below 30%. $P_n$ of PVA using ADMVN was larger than that of PVA using AIBN. On the other hand, conversion of the former was smaller than that of the latter, and it was found that the initiation rate of the ADMVN was lower than that of AIBN. This could be explained by a fact that the rate of photolysis of AIBN is faster than that of ADMVN due to the higher quantum yield or dissociation rate constant of AIBN than that of ADMVN. The $P_n$, syndiotacticity, and whiteness of PVA from PVAc polymerized at lower temperatures were superior to those of PVA from PVAc polymerized at higher temperatures.

• 신재생에너지
• /
• 제5권2호
• /
• pp.9-14
• /
• 2009

Automobile Shredder Residue (ASR) is very appropriate in a gasification melting system. Gasification melting system, because of high reaction temperature over than $1,350^{\circ}C$, can reduce harmful materials. To use the gasification processes for hydrogen production, the high concentration of CO in syngas must be converted into hydrogen gas by using water gas shift reaction. In this study, the characteristics of shift reaction of the high temperature catalyst (KATALCO 71-5M) and the low temperature catalyst (KATALCO 83-3X) in the fixed - bed reactor has been determined by using simulation gas which is equal with the syngas composition of gasification melting process. The carbon monoxide composition has been decreased as the WGS reaction temperature has increased. And the occurrence quantity of the hydrogen and the carbon dioxide increased. When using the high temperature catalyst, the carbon monoxide conversion ratio ($1-CO_{out}/CO_{in}$) rose up to 95.8 from 55.6. Compared with average conversion ratio from the identical synthesis gas composition, the low temperature catalyst was better than the high temperature catalyst.

• Archives of Pharmacal Research
• /
• 제29권12호
• /
• pp.1096-1101
• /
• 2006

Armeniacae Semen not only contains amygdalin, but emulsin also, which is an enzyme that hydrolyzes amygdalin. The extraction yield of amygdalin from Armeniacae Semen was low, due to the presence of emulsin, when extracted with water. When Schizandrae Fructus solution was used as the extractant; however, amygdalin was almost completely extracted, regardless of the cutting size, due to the absence of the influence of emulsin. In addition, when the crude powder or small piece forms were used with Schizandrae Fructus solution, on epimerization of the D-amygdalin into neoamygdalin occurred. D-amygdalin and its conversion product, neoamygdalin, were quantitatively analyzed by reverse-phase, high-performance liquid chromatography (HPLC), with an optimized eluent of 10 mM sodium phosphate buffer (pH 2.3), containing 11.5% acetonitrile. The concentration and detector response were linearly correlated over the range 0.05 to 2 mM. The detection limits for both D-amygdalin and neoamygdalin were approximately $5\;{\mu}M$ for the amount injected.