• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.49-49
• /
• 2009

Phosphors with oxide host material, YAG:$Ce^{3+}$ and $(Ca,Sr,Ba)_2SiO_4:Eu^{2+}$ yellow phosphor, has been used for LED applications. The WLEDs using these phosphors are widely used for LCD backlighting, automobile, and general lighting applications since they have high conversion efficiency and good thermal and chemical stability which can meet necessary life time of LED products up to now. With advances of LED chip technology, the external quantum efficiency and driving current in chip get higher so that the phosphors for high power chip are required to maintain high conversion efficiency and stability at high temperature due to the heat dissipated from LED chips. In addition, higher color rendering index of LED lighting and color reproducibility of LCD than those of LEDs with single yellow phosphors are required. In order to overcome these technical issues rising from evolution of LED technology, new phosphors are in demand and nitride phosphors, one of the promising new candidate materials, will be discussed here.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.221-239
• /
• 2014

The global demand for energy has been increasing since past decades. Various technologies have been working to find a suitable alternative for the generation of sustainable energy. Photovoltaic technologies for solar energy conversion represent one of the significant routes for the green and renewable energy production. Despite of remarkable improvement in solar cell technologies, the generation of power is still suffering with lower energy conversion efficiency, high production cost, etc. The major problem in improving the PV efficiency is spectral mismatch between the incident solar spectrum and bandgap of a semiconductor material used in solar cell. Luminescent materials such as rare-earth doped phosphor materials having the quantum efficiency higher than unity can be helpful for photovoltaic applications. Quantum cutting phosphors are the most suitable candidates for the generation of two or more low-energy photons for the absorption of every incident high-energy photons. The phosphors which are capable of converting UV photon to visible and near-IR (NIR) photon are studied primarily for photovoltaic applications. In this review, we will survey various near IR quantum cutting phosphors with respective to their synthesis method, energy transfer mechanism, nature of activator, sensitizer and dopant materials incorporation and energy conversion efficiency considering their applications in photovoltaics.

• 한국광학회지
• /
• 제24권5호
• /
• pp.256-261
• /
• 2013

고효율 color-matching LCD (liquid crystal display)에 적용하기 위하여, 445 nm의 청색 여기광을 사용하여 적색 및 녹색 형광체의 전환효율과 양자효율을 측정 분석하였다. 투명한 기판 및 표면이 반사처리된 기판에 각각 두께 50 ${\mu}m$의 적색, 녹색 형광체를 코팅하고, 적분구를 사용하여 형광의 세기를 측정하였다. 적색 형광체 및 녹색 형광체에 대해서 전환효율은 각각 41.4%과 46%였으며, 양자효율은 각각 60.4%와 53.5%였다. 제조사의 제원과의 차이점에 대해서 검토되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1559-1560
• /
• 2007

BGR mixture phosphor pumped by 400 nm is developed for white-light-emitting diode of liquid crystal display backlight. White-emitting phosphor is prepared by mixing $Ba_2SiO_4:Eu^{2+}$ and $(Ba,Sr)_3MgSi_2O_8:Eu^{2+},Mn^{2+}$ phosphors.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.70-74
• /
• 2017

Up-conversion (UC) and down-conversion (DC) luminescence of $LuNbO_4:0.18Yb^{3+}$, $xEr^{3+}$ (x = 0.01-0.07) powders were investigated. Post-annealed powders were composed of a single $LuNbO_4$ phase with a monoclinic fergusonite structure, whereas as-calcined powders contained a small amount of the $Li_3NbO_4$ impurity phase. Under near infrared radiation, the UC spectra of the post-annealed powders exhibited the strong green and weak red emission peaks assigned to the transition of $^2H_{11/2}/^4S_{3/2}$ and $^4F_{9/2}$ to the ground state ($^4I_{15/2}$) of $Er^{3+}$ ions, respectively; the green and red emission intensities were approximately 330 and 270% stronger, respectively, than those of the as-calcined powders. A two-photon UC process was involved in the emission as a result of an energy transfer from $Yb^{3+}$ to $Er^{3+}$. Under ultraviolet radiation, the DC spectra exhibited broad blue and sharp green emission bands. The DC mechanism was explained using self-activated $[NbO_4]^{3-}$ niobates and an energy transfer from $[NbO_4]^{3-}$ to $Er^{3+}$.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.355-360
• /
• 2018

$LuNbO_4:0.2Yb^{3+},xTm^{3+}$ powders were prepared using a solid-state reaction process. The effects of the amount of Tm on up-conversion(UC) and down-conversion(DC) luminescence properties are investigated. X-ray diffraction patterns confirm that $Yb^{3+}$ and $Tm^{3+}$ ions are successfully incorporated into Lu sites. Under 980 nm excitation, the UC spectra of the powders predominantly exhibit strong near-infrared emission bands that peak at 805 nm, whereas weak 480 nm emission bands are observed as well. The emission bands are assigned to the $^1G_4{\rightarrow}^3H_6$ (480 nm) and 3 $^3H_4{\rightarrow}^3H_6$ (805 nm) transitions of the $Tm^{3+}$ ions via an energy transfer from $Yb^{3+}$ to $Tm^{3+}$; two- and three-photon UC processes are responsible for the 805 and 480 nm emissions, respectively. The DC emission spectra exhibit blue emission ($^1D_2{\rightarrow}^3F_4$) of $Tm^{3+}$ at 458 nm. The amount of Tm affects the emission intensity with the strongest emissions at x = 0.007 and 0.02 for the UC and DC luminescence, respectively. The results demonstrate that $LuNbO_4:Yb^{3+},Tm^{3+}$ phosphors are suitable for bio-applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1350-1352
• /
• 2008

Research on down conversion phosphor materials is the key for the development of solid state lighting (SSL). Especially finding alternative red phosphor for white LEDs based on blue or NUV LEDs are important research task. Under this view, we have synthesized a series of $Eu^{3+}$ substituted $La_2W_{2-x}Mo_xO_9$ (x = 0 ~ 2, insteps of 0.1) red phosphor and characterized by X-ray diffraction (XRD) and photoluminescence. XRD results reveal a phase transition from triclinic to cubic structure for $x\;{\geq}\;0$. All the compositions show broad charge transfer band due to charge transfer from oxygen to tungsten/molybdenum and red emission due to $Eu^{3+}$ ions. Select compositions show high red emission intensity compared to the commercial red phosphor under NUV/blue ray excitation. Hence, this candidate can be possible red emitting phosphors for white LEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.56-59
• /
• 2009

In the nineties the invention of the InGaN blue LED has innovated illumination technology. Currently LCD backlighting and more and more general lighting applications are based on white LEDs comprising of inorganic phosphors and blue emitting InGaN chip. Well established phosphor materials are ortho silicates and garnets like yellow emitting YAG:Ce. In our paper we demonstrate that garnet materials also allow for green light emission for both, general lighting and backlighting LED applications.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.406-409
• /
• 2004

교류 구동 분산형 EL(ACPEL)에 사용되는 ZnS:Cu 청색 형광체를 고상 반응법으로 제조하였다. 1차 소성 후 인위적 결함을 형광체 표면에 도입함으로서 2차 소성 중에 의해 일어나는 ZnS의 상전이 및 EL 발광 휘도에 미치는 영향을 연구하였다. 즉 1차 소성된 형광체를 ball-mill 공정에서 인위적으로 표면에 defect를 형성시켜 ZnS의 저온상인 cubic으로의 전이가 용이하게 하여 EL구동하에서 발광 휘도를 증가시켰다. Ball-mill의 공정 변수로는 milling 시간과 rpm 등을 고려하여 각 조건에 따른 효과를 고찰하였으며, 발광 spectrum을 측정한 결과, 최적 조건에서 인위적인 결함을 형성하지 않은 형광체 보다 발광 휘도가 약 30% 이상 증가하였다. 또한 각기 다른 ball-mill 조건으로 합성된 형광체의 결정상을 분석하고 비교하였으며 상전이 특성에 따른 발광 휘도 변화를 고찰하였다.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.685-689
• /
• 2016

Synthesis of the fluorescent Au nanoclusters is reported. The Au nanoclusters were synthesized via reduction of gold ions in reverse micelles with mild reducing agents. The Au nanoclusters show a bright red emission at 640 nm. The fluorescent Au nanoclusters attract great interest for sensor, electronic device and bio-imaging applications because of ultra-small size, high chemical stablity and bright emission. We believe that the fluorescent Au nanoclusters can have optoelectronic applications such as optical down conversion phosphors.