• Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.12-18
• /
• 2015

The inter-conversion between different control laws in flight has a lot of risk. The SWM(Switching Mechanism) including logic and stand-by mode is designed to analyze the transient response of aircraft during inter-conversion between different control laws, based on the in-house software for non-real-time and real-time simulation. The SWM applies the fader logic of TFS(Transient Free Switch) to minimize the transient response of an aircraft during the inter-conversion, and applies the reset '0' type of the stand-by mode to prevent surface saturation due to integrator effect in the disengaged flight control law. The transition time is also important to minimize the objectionable transient response in the inter-conversion, as well as the transition control law design. This paper addresses the results of non-real-time simulation for the characteristics of transient response to different transition time to select the adequate transient time, and the real-time pilot evaluation, using SSWM(Software Switching Mechanism) and HSWM(Hardware Switching Mechanism), which is met for Level 1 flying qualities and assures safety of flight.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.10
• /
• pp.464-470
• /
• 2006

In this paper, we develop a descriptor based on binary ECG conversion system that supports the conversion of a binary ECG format into XML-based HL7 aECG for the interoperability of ECG. HL7 aECG is a XML based standard for interoperability of ECG waveform. For the conversion of variety of ECG formats, we propose a binary ECG description mechanism. In order to describe binary ECG more efficiently, we develop a XML-based Binary ECG Description (BED) Language. One of the powerful features of using the XML-based ECG Description mechanism is that ECG data can read from various formats without the modification of source code of conversion system, and consequently it reduces conversion system maintenance costs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1151-1156
• /
• 2007

In this paper, we develop a new conversion method for implementing binary ECG(Electrocardiogram) conversion scheme to improve our previous research works that supported the conversion of binary ECG files into HL7 aECG for enhancing interoperability of ECG data. HL7 aECG is a XML-based standard for interoperability of ECG waveform. To improve the performance of ECG data conversion, we utilize a compilation-based ECG conversion method on binary ECG files. Our new method supports both flexibility of BED-based ECG conversion mechanism and the performance of direct conversion mechanism.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.329-339
• /
• 2006

The production of lower olefins from methanol becomes an attractive process because of the rapid increase in crude oil price. This paper reivews the conversion mechanisms of methanol to hydrocarbons over zeolite and SAPO molecular sieve catalysts to understand the formation steps of lower olefins from methanol. The feasibility of the conversion mechanisms such as the direct mechanism based on well-defined intermediates and the hydrocarbon pool mechanism involving hydrocarbon moieties as an active centers is discussed with reepect to the induction period, the selectivity for products and the deactivation phenomena of the methanol conversion. The literature appeered since 1999 for the structure of the hydrocarbon pool and its catalytic role in the methanol conversion are summariged, and the prospect for the methanol-to-olefins process is described.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.123-129
• /
• 2007

On the Semantic Web, the content of the documents must be explicitly represented through metadata in order to enable contents-based inference. In this study, we propose a mechanism to convert the Conceptual Graph (CG) into Resource Description Framework (RDF). Quite a large number or representation languages for representing knowledge on the Web have been established over the last decade. Most of these researches are focused on design of independent knowledge description. On the Semantic Web, however, a knowledge conversion mechanism will be needed to exchange the knowledge used in independent devices. In this study, the CG could give an entire conceptual view of knowledge and RDF can represent that knowledge on the Semantic Web. Then the CG-based object oriented PROLOG could support the natural inference based on that knowledge. Therefore, our proposed knowledge conversion mechanism will be used in the designing of Semantic Web-based knowledge representation and inference systems.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.395-399
• /
• 2018

This article investigates the mechanism of electronic signal phase noise degradation induced by laser phase noise in optical links comprising optical resonators. Through theoretical derivation, we find that the phase noise of the output electronic signal has the same spectral shape of optical intensity noise as the output of the optical resonator. We propose that the optical resonator transfers laser phase noise to light intensity fluctuation and then the intensity fluctuation is converted to electric phase noise through AM-PM conversion mechanism in the photodiode. An optical link comprising a Fabry-Perot resonator was constructed to verify the proposed mechanism. The experimental results agree with our theoretical prediction verifying that the supposition is correct.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2447-2448
• /
• 2010

• Elastomers and Composites
• /
• v.14 no.4
• /
• pp.231-252
• /
• 1979

Polymerization of 2-pyrrolidone was carried out through anionic mechanism using $SO_2/KOH$ as catalyst. The effects of KOH concentration, $SO_2/KOH$ mole ratio and temperature on polymerization were investigated. The conversion and viscosity of polymers were measured at various polymerization conditions. It was observed that as the concentration of KOH was increased, equilibrium conversion was also increased. It was, however, found that after the concentration of KOH was reached above 8 mole percent, the equilibrium conversion was decreased. The highest rate of polymerization and maximum conversion were obtained when $SO_2/KOH$ mole ratio was around 0.5. It was also found that the rate of polymerization and the equilibrium conversion were higher at $50^{\circ}C$. than at $30^{\circ}C$. but the viscosity of polymer solution at $50^{\circ}C$. was not so high as expected. The rate constant, $K_p$ of polymerization, was determined by least square method: the value of $K_p$ was observed as 16 liter/mole hour at $50^{\circ}C$. and 2.6 liter/mole hour at $30^{\circ}C$., respectively. The mechanism of polymerization was also discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.17-17
• /
• 2012

Magnesium alloys exhibit many attractive properties such as low density, high strength/weight ratio, high thermal conductivity, very good electromagnetic features and good recyclability. However, most commercial magnesium alloys require protective coatings because of their poor corrosion resistance. Attempts have been made to improve the corrosion resistance of the Mg alloys by surface treatments, such as chemical conversion coatings, anodizing, plating and metal coatings, are commonly applied to magnesium alloys in order to increase the corrosion resistance. Among them, chemical conversion coatings are regarded as one of the most effective and cheapest ways to prevent corrosion resistance. In this study, zinc phosphate conversion coatings on various Mg alloys have been developed by selecting proper phosphating bath composition and concentration and by optimizing phosphating time, temperature. Morphology, coatings composition, corrosion resistance, adhesion and its formation and growth mechanism of the zinc phosphate conversion coatings were studied. Results have shown some attractive properties such as simplicity in operation, significantly increased corrosion protective property. However, adhesions between coatings and substrate and also between coatings and paint are still not satisfied. Resolving the problems and understanding the mechanism of phosphating process are targets of our study.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.428-433
• /
• 2008

The online advertising industry's business model undertakes the change from CPM (cost-per-mille)-based to CPC (cost-per-click)-based. However, due to the problem of 'Click Fraud', CPA (cost-per-action) has been regarded as a new step. For CPA, publishers need to get information after a user clicks an advertisement. Therefore, in CPA, the key is to get Conversion Action Data (CAD). This paper introduces two existing mechanisms for getting CAD, compare their characteristics, and analyze their limitations. Then the two new mechanisms are introduced and their requirements and feasibility are analyzed. Lastly, we compare the existing two and the new two mechanisms, and point out each mechanism's business possibility, value and Application Area. This paper will help publishers choose the most appropriate mechanism on the basis of their situation.