• Journal of Science Education
• /
• v.46 no.1
• /
• pp.93-108
• /
• 2022

The purpose of this study is to develop a STEAM program that can be used in the high school credit system to be fully implemented in 2025, and to examine its validity and effectiveness. The STEAM program analyzed the 2015 revised curriculum centering on science, technology, and engineering through the 2015 revised curriculum analysis, and then selected the five latest issues: hydrogen fuel, climate crisis, data science, appropriate technology, and barista. In accordance with this self-developed program development format (frame), it was developed for seven months through a process of group deliberation. The draft of the STEAM program for 29 sessions of five types, developed to indirectly experience the career path and occupation of high school students, was verified through consultation with 2 STEAM education experts. It was applied at five different high schools for a pilot implementation. As a result of the pilot application, it was confirmed that the students' STEAM attitude significantly improved in the post-test than the pre-test, and the students' high satisfaction with the program was confirmed. In addition, through an interview with the pilot application teacher, it was positively evaluated that 'the content and level of the program are suitable and through experience solving real-life problems, you can apply the content knowledge of related subjects and have an opportunity to experience careers.' Based on the results of the pilot application, the high school credit system STEAM program for students and teachers was finally completed in 29 lessons of five types. Through this study, the development and operation of the next-generation STEAM program that can be applied in the high school credit system should be actively developed, and a plan to improve teachers' professionalism so that the high school credit system can be established and operated properly for blended classes triggered by COVID-19. The necessity of design was suggested. This study is expected to be used as basic data for the development and operation of STEAM programs in the high school credit system, which will be fully implemented in 2025.

• Composites Research
• /
• v.35 no.4
• /
• pp.248-254
• /
• 2022

In this study, TiB₂-steel composite with high-fractional TiB₂ reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabricated composite, after the compression test of TiB₂-steel composite, the fracture surface was analyzed and the fracture behavior on compression test was predicted. As a result of the compression fracture surface analysis, interfacial failure trace between the steel matrix and the reinforcement was observed, and the interface between the steel matrix and the reinforcement was analyzed using TEM. From the result of microstructure analysis on the fabricated composite, it was confirmed that, in addition to TiB₂ reinforcement and steel matrix, TiC phase and coarse (Fe,M)₂B (M=Cr,Mn) phase were formed. Throughout the thermodynamic calculation, it was confirmed that TiC and (Fe,M)₂B can be formed as a stable phase under the process condition. The fabricated TiB₂-steel composite had a significantly increased hardness, and the compressive strength and Young's modulus were improved by 3.07 times and 1.95 times, respectively, compared to steel matrix. It seems that the coarse (Fe,M)₂B (M=Cr,Mn) phase formed throughout the composite causes the deterioration of mechanical properties, and by controlling the formation of the (Fe,M)₂B (M=Cr,Mn) phase, it is judged that the mechanical properties of the TiB₂-steel composite can be further improved.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.479-486
• /
• 2023

This study is a descriptive research study to determine differences in conflict management types according to MBTI preference indicators among nursing students. Data collection was from August 30 to September 30, 2023. Data analysis was performed using independent t-test, one-way ANOVA, and Scheffe's. As a result of the study, among the MBTI indicators showing significant differences in conflict management types, 'i' had higher avoidance than 'E' in the energy direction (t=-3.776, <0.01). In the case of decision-making function, F had higher concession (t=-3.478, <0.01) and avoidance (t=-3.389, <0.01) than T, and T had higher dominance than F (t=2.070, <0.5). In terms of external life coping style, J had higher cooperation (t=2.756, <0.01) and compromise (t=2.044, <0.5) than P. In MBTI's psychological function types, the NF type had higher concessions than the ST type (F=4.174, <0.05), and the SF type had higher avoidance than the ST type (F=4.202, <0.05). The results of analyzing the differences in conflict management types by combining the MBTI decision-making function type and external life coping style showed that the FJ type was more cooperative than the FP type (F=2.907, <0.05), and the FJ type was more cooperative than the TP type (F =4.662, <0.01), and the FJ type had higher avoidance than the TJ type (F=3.327, <0.05). MBTI's attitude index showed that the EJ type had higher cooperation than the EP type (F=2.817, <0.05), and the IP type had significantly higher avoidance than the EP type (F=4.551, <0.01). This study is significant in confirming differences in conflict management types by combining MBTI decision-making function types (F, T) and external life coping styles (J, P), which have not been studied in Korea to date. In the follow-up study, we propose research on conflict management types by MBTI personality type by reflecting the results of this study and expanding the number of subjects, development of conflict management programs by MBTI indicators and personality types, and analysis of program effectiveness.

• Journal of Industrial Convergence
• /
• v.22 no.6
• /
• pp.99-106
• /
• 2024

The author thought about how to explain visual functions in an easy-to-understand way to customers visiting the optical shops and provide easy customer consultation, and attempted to evaluate the usability and value of the educational webtoon for patient consultation by applying it to the optical shops's visitors. Survey study was conducted targeting 152 customers who visited optical shops A in Incheon from January to December 2023. In this study, consultation was conducted using educational webtoons to help the general public understand concepts that are difficult to understand, such as binocular vision function, the concept of heterophoria, prism lenses, and binocular balance. The areas of 'understanding', 'interest', 'usability', 'necessity', and 'expression of expertise' felt by the visitors who received counseling were scored and evaluated, and differences according to counseling method were evaluated using an independent sample t-test. Statistical verification was performed. When the optometrist only explained verbally, the score distribution was relatively low: 1.96 points for understanding, 2.06 points for interest, 2.96 points for usability, 4.20 points for necessity, and 3.19 points for expertise. When the optometrist provided explanations along with the book, understanding was 4.14 points, interest was 3.28 points, usability was 3.60 points, necessity was 4.17 points, and expertise was 3.55 points. When the optometrist explained with a webtoon, understanding was 4.57 points, interest was 4.96 points, usability was 4.18 points, necessity was 4.65 points, and expertise was 3.15 points. When explanations were given only verbally, all items showed the lowest scores, whereas consultations using webtoons showed 4 points or more (excellent) in all items except the 'expression of expertise' item. It is evaluated that actively using webtoons in various consultation situations that occur in optical shops will help increase customer interest and concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1488-1496
• /
• 2016

The purposes of this study were to analyze mothers' eating, cooking, and exercise habits based on their demographic characteristics and to examine the relationship between those habits and their late school-aged children's Broca index. A total of 393 questionnaires were mailed to the mothers of late school-aged children who registered at four elementary schools in the Seoul area, of which 159 participants (40.0%) completed questionnaires. Statistical data analyses were performed using SPSS/Win 21.0 for descriptive statistics, t-test ANOVA, and Pearson's regression coefficient. There was a statistically significant difference in mothers' cooking habit (F=3.920, P=0.022) and exercise habit (F=3.211, P=0.043) according to their educational level. Interestingly, 82.4% of mothers had a Broca index of less than 90% of normal body mass level. A significant positive correlation of Broca index between mothers and their late school-aged children (r=0.345, P<0.001) indicated that children whose mothers had a low body mass level also tended to have a low body mass level. In this study, late school-aged children's Broca index was not significantly related with mother's eating (r=-0.072, P=0.367) or exercise habits (r=-0.010, P=0.897) but was significantly related with their mother's cooking habits (r=-0.157, P=0.048). Considering there are few studies examining the impacts of mother's cooking habits on their children's appropriate body mass, the results suggest that developing an effective educational program to cultivate mothers' healthy cooking habits to improve school-aged children's health status is very important. The findings of this study provide important data that could be used when developing health education programs tailored to the multi-dimensional impacts of mothers' life habits on their last school-aged children's developmental health status.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.73-84
• /
• 1993

In this research, configuration design optimization of plane truss structure has been tested by using decomposition technique. In the first level, the problem of transferring the nonlinear programming problem to linear programming problem has been effectively solved and the number of the structural analysis necessary for doing the sensitivity analysis can be decreased by developing stress constraint into member stress approximation according to the design space approach which has been proved to be efficient to the sensitivity analysis. And the weight function has been adopted as cost function in order to minimize structures. For the design constraint, allowable stress, buckling stress, displacement constraint under multi-condition and upper and lower constraints of the design variable are considered. In the second level, the nodal point coordinates of the truss structure are used as coordinating variable and the objective function has been taken as the weight function. By treating the nodal point coordinates as design variable, unconstrained optimal design problems are easy to solve. The decomposition method which optimize the section areas in the first level and optimize configuration variables in the second level was applied to the plane truss structures. The numerical comparisons with results which are obtained from numerical test for several truss structures with various shapes and any design criteria show that convergence rate is very fast regardless of constraint types and configuration of truss structures. And the optimal configuration of the truss structures obtained in this study is almost the identical one from other results. The total weight couldbe decreased by 5.4% - 15.4% when optimal configuration was accomplished, though there is some difference.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.159-167
• /
• 2015

RI-Biomics is a promising radiation convergence technology that combines radiation with bio science as new growth power technology. Many developed countries are focusing active support and constant exertion to dominate the RI-Biomics market in advance. In order to achieve global leadership in the RI-Biomics field, we need more highly advanced technologies and professional manpower. In fact, we have less manpower compared to technology we currently hold. In this study, we established a basic infrastructure to train professional manpower in the RI-Biomics field by developing/operating optimum training program through expert interviews and survey. The developed program has four organized sections to understand overall procedure of RI-Biomics. To evaluate our training program, we performed test operations with eight students who have a major related to RI-Biomics for three weeks in KARA (Seoul) and KAERI (Jung-eup). In detail, radioisotope usage and safety management were conducted for one week as basic course, RI-Biomics application technology was conducted for two weeks as professional course. To verify performance results of training program, we conducted to journal research, daily reports, and survey on participants. The results show a high level of satisfaction with training programs and continuous intention of involvement in our program. We also need to develop an intensive course to train high-quality human resources and to operate training program continuously. This training program will be used as basic materials for the development of RI-Biomics curriculum for university. Hence, we will expect that our training program contributes in training a professional manpower and develop RI-Biomics technology.

• Korean Journal of Microbiology
• /
• v.53 no.2
• /
• pp.83-96
• /
• 2017

A constructed sea stream in Yeongdo, Busan, Republic of Korea is mostly static due to the lifted stream bed and tidal characters, and receives domestic wastewater nearby, causing a consistent odor production and water quality degradation. Bioaugmentation of a microbial consortium was proposed as an effective and economical restoration technology to restore the polluted stream. The microbial consortium activated on site was augmented on a periodic basis (7~10 days) into the most polluted site (Site 2) which was chosen considering the pollution level and tidal movement. Physicochemical parameters of water qualities were monitored including pH, temperature, DO, ORP, SS, COD, T-N, and T-P. COD and microbial community analyses of the sediments were also performed. A significant reduction in SS, COD, T-N, and COD (sediment) at Site 2 occurred showing their removal rates 51%, 58% and 27% and 35%, respectively, in 13 months while T-P increased by 47%. In most of the test sites, population densities of sulfate reducing bacterial (SRB) groups (Desulfobacteraceae_uc_s, Desulfobacterales_uc_s, Desulfuromonadaceae_uc_s, Desulfuromonas_g1_uc, and Desulfobacter postgatei) and Anaerolinaeles was observed to generally decrease after the bioaugmentation while those of Gamma-proteobacteria (NOR5-6B_s and NOR5-6A_s), Bacteroidales_uc_s, and Flavobacteriales_uc_s appeared to generally increase. Aerobic microbial communities (Flavobacteriaceae_uc_s) were dominant in St. 4 that showed the highest level of DO and least level of COD. These microbial communities could be used as an indicator organism to monitor the restoration process. The alpha diversity indices (OTUs, Chao1, and Shannon) of microbial communities generally decreased after the augmentation. Fast uniFrac analysis of all the samples of different sites and dates showed that there was a similarity in the microbial community structures regardless of samples as the augmentation advanced in comparison with before- and early bioaugmentation event, indicating occurrence of changing of the indigenous microbial community structures. It was concluded that the bioaugmentation could improve the polluted water quality and simultaneously change the microbial community structures via their niche changes. This in situ remediation technology will contribute to an eco-friendly and economically cleaning up of polluted streams of brine water and freshwater.