• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.155-161
• /
• 2019

Recently, increases in major disasters such as fires, earthquakes and typhoons have raised public expectations for safety. In addition to this increase in expectations of safety, the government continues to push for more manpower and better treatment for firefighters who are operating in the disaster scene. Despite the improvement of working conditions and increased welfare for firefighters, however, the incidence and turnover of various mental diseases continues to increase. It is reported that many of the diseases such as post-traumatic stress disorder and the turnover of firefighters are due to a mismatch in individual's personality and work environment. In this study, 108 firefighters were evaluated for their vocational aptitude in the new curriculum. Based on the analysis results, new firefighters were proposed to provide employment and education training improvements, and to provide job security suitable for the individual's personality type through the introduction of the vocational aptitude test for firefighters who are working in the fire service. In addition, we would like to use the vocational aptitude test as a material for reducing post-traumatic stress disorder and increasing turnover through long-term tracking and observation, rather than from a one-off perspective.

• Textile Coloration and Finishing
• /
• v.32 no.4
• /
• pp.245-254
• /
• 2020

The sheet molding compound composite has been applied divers section. This paper reports processing of carbon fiber reinforced thermosetting composite with diverse resins and which was composed of chopped carbon fiber (30 ~ 60 wt%). Normally the paste that the viscosity is over 15,000 cps has been used in traditional Sheet molding compound (SMC) machine. In this research, SMC machine was designed to make Carbon-sheet molding compound (C-SMC) prepreg which was composed with low viscosity resin (1,800 ~ 2,500 cps increase up to 10,000 cps after aging). In order to confirm the optimal processing condition. Mechanical strength tests including tensile test, shear test, impact test, flexural strength test were conducted on C-SMC composites. Plus we identified the correlation between the mechanical properties and prepreg processing condition (carbon ratio and applied resin).

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.161-167
• /
• 2021

This study was conducted to identify the relationship between the dual task performance and driving behavior of the elderly driver in order to identify whether the dual task can be utilized as a test to screen the driving ability of the elderly driver. We surveyed general information and driving-related information for 32 normal elderly drivers, and evaluated Y-DuCog(Yonsei-Dual task Cognitive screening) and the K-DBQ (Korean-Driving Behavior Questionnaire). As a result of the study, the performance of the dual task using the pegboard task and the animal name speaking showed a significant correlation with the score of the violation domain of K-DBQ. With this study, it was possible to confirm the possibility as a test for discrimination of driving ability.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.397-402
• /
• 2024

Silicon carbide materials undergo an oxidation reaction in a high-temperature oxidizing environment and show different characteristics depending on the test temperature and time. In particular, the added oxides form a secondary phase within the sintering process and exhibit different oxidation characteristics depending on the added sintering materials. Therefore, to evaluate the oxidation characteristics, the weight of the test piece and the thickness of the oxidation layer were observed, and the structure and oxidation characteristics of the material were analyzed using SEM. SEM observation showed that an oxide layer was formed on the surface of the liquid sintered silicon carbide material after it was oxidized at 1200 ℃, 1300 ℃, and 1400 ℃ for 10 hours, respectively. Then, a bending test was performed at each temperature on the test piece with the oxidation layer formed to evaluate the change in flexural strength. The strength was 466.6 MPa at 1200 ℃, 363.1 MPa at 1300 ℃, and 350.8 MPa at 1400 ℃. Al₂O₃-SiO₂ oxidized at 1200 ℃ for 10 hours showed an increase in strength of about 21.0 MPa compared to the data before the oxidation test.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.457-460
• /
• 2009

u-IT Convergence appliances study and are developed in communication by development of u-IT technology, broadcasting, portal, contents, equipment and all fields of business such as solution. This treatise presents valuation basis of, economic performance, administration sex etc. by temperature, pressure, own, storehouse, gas, justice for humidity sensors and valuation basis that define u-IT Convergence, and sense information u-IT Convergence devices and terminal. Also, studied standardization standard of u-IT Convergence network appliance that follow in valuation basis for u-IT Convergence devices. Is going to contribute establish value as estimation product that equip stability and authoritativeness through correct certification assessment for technological development and appliances on Ubiquitous information-oriented society through this research and accomplish standardization.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.61-69
• /
• 2017

This study was to identify the correlation between dry eye syndrome, upper extremity pain, depression and addictive smart phone use among college students. Data were collected from 286 college students using a self-report questionnaire. 15.0% of participants have an addictive smart phone use. There were significant differences by dry eye syndrome(t=-4.38, p<.001), neck pain(t=-2.60, p<.05) and depression(t=-4.15, p<.001) according to the addictive smart phone use. Dry eye syndrome(r=.332, p<.001), neck pain(r=.143, p<.05), hand pain(r=.138, p<.05) and depression(r=.402, p<.001) were positively related to addictive smart phone use. Strategies to diminish depression, and to prevent dry eye syndrome and neck pain in college students will be an important intervention component to prevent addictive smart phone use and health problems in future studies.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.35-41
• /
• 2016

As software is very important, modern men are interesting software quality testing. In this paper, we analyze the Internation standard and Test data, so, we propose the testing method by analysing testing data. We compare ISO/IEC 9126-2 testing model with ISO/IEC 25023 testing model. On the basis of ISO/IEC 25023, we classify the test data and we analyze the difference of International Standard to functionality, reliability, usability, efficiency, maintainability, portability, compatability, and security. By reality 331 testing data, we classify test data, and analyze difference according to sex. We find regression model by functionality, usability and testing date and we prove difference of testing date and the number of error by tester. Also, we prove difference of the number of error in software type.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.55-60
• /
• 2020

The recent semiconductor packaging technology is evolving into a high-performance system-in-packaging (SIP) structure, and copper-to-copper bonding process becomes an important core technology to realize SIP. Copper-to-copper bonding process faces challenges such as copper oxidation and high temperature and high pressure process conditions. In this study, the bonding interface quality of low-temperature copper-to-copper bonding using a two-step plasma treatment was investigated through quantitative bonding strength measurements. Our two-step plasma treatment formed copper nitride layer on copper surface which enables low-temperature copper bonding. The bonding strength was evaluated by the four-point bending test method and the shear test method, and the average bonding shear strength was 30.40 MPa, showing that the copper-to-copper bonding process using a two-step plasma process had excellent bonding strength.

• Journal of Biomedical Engineering Research
• /
• v.41 no.5
• /
• pp.203-209
• /
• 2020

As the number of people with gait disorders increases, the demand for using wheelchairs increases and the area of a ctivity for people with disabilities expands, thereby they increasing the demand for riding comfortability in various driving environments. Therefore, this study is to develop an entry-level active suspension system that apply to wheelchairs and to evaluate its usability. The suspension applied in this paper consists of a coil spring, a shock absorber, a control module to control the strength of the shock absorber, and a road surface condition monitoring system. A wheelchair occupant secures the riding comfort by adjusting the coil strength of the shock absorber in 12 steps according to various road conditions. Therefore, the mechanical properties were evaluated through the structural analysis of the suspension system, and the tendency toward the magnitude of the road surface vibration attenuated according to the rigidity of the suspension through the vibration test was attempted. In conclusion, as a result of structural analysis of the suspension system, stress in a range lower than the yield strength of the material was generated, and the vibration test showed the effect of attenuating the vibration generated from the road surface when the stiffness of the suspension was adjusted.