• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.83-89
• /
• 2004

The analysis about consolidation characteristic in soft clay has been depending one-dimension consolidation analysis. but, drain and undrain zone are explicated as homogeneous by consolidation behavior following consoli- dated settlementsoft in soft clay. 1) Established sand drain in soft clay in many types, and measured water content, unconfined compression strength, vertical stress, horizontal stress, vertical settlement, pore water pressure. 2) Arranged the result from the test and numerically explicated effective stress, total stress, and effective stress path at the drain and undrain zone. 3) We also analyzed and comparied elastic and elastic-plastic in soft clay using measured data. The result analyzed does not approach to a special theory, but, it is well in accord with the result of other investigator's study in the same condition.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.81-84
• /
• 2000

Digital Halftoning convert a continuous-tone images to a binary images. Inverse halftoning addresses the problem of recovering a continuous image from a halftoned binary image. Simple low pass filtering can remove the high frequency noise but it also removes the edge information. Thus the edge information should be separated from the halftoning noise. As a result, the edge of result image is blurring. This paper present that we obtain continuous-tone-image which using Anisotropic diffusion filter. To reduce noise without blurring the edges of reconstructed image use edge map. The experimental results show that proposed method gives a higher PSNR and better subjective quality than conventional methods. As a result, the edge information of reconstructed image reduce blurring.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.3
• /
• pp.458-485
• /
• 2007

This study aims to examine the effects of consumption values on digital convergence products buying behavior. Especially, this study examines the nature of consumption values that differentiate incremental innovation products from radical innovation product. We first categorize the convergence products into incremental innovation products and radical innovation products based on the degree of innovation, and then study the differences of consumption values of each product group. The empirical research is conducted on the premise that the consumer's value can play an important role in the process of selecting convergence product types. Although some factors related to function value has been accounted much of, various consumer values have not been studied in the context of convergence product consumption behavior. This research assumes that consumer choice behavior is a function of multiple consumption values such as functional value, social value, emotional value, and epistemic value. The result shows that consumption values of digital convergence products are made up of 4 consumption values-emotional, epistemic, social and functional values. Also, these consumption values affect the purchase intention of consumers. Purchase intention of radical innovation convergence products is affected by emotional value, epistemic value, and functional values. Purchase intention of incremental innovation convergence products is affected only by functional value. Demographic variables such as sex, age and income don't have influence on purchase intention. Our findings suggest that choice behavior of digital convergence product is influenced by several consumption values. Managerially, our result emphasize that convergence products must satisfy the consumption values that consumers are seeking in order to be successful in the market. the theoretical and practical implications of these findings are discussed as well.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.2
• /
• pp.19-24
• /
• 2012

This study clearly defined the idea of convergence of small and medium companies and convergence types and understood convergence case of small and medium companies for each type in order to help enhancement of competitiveness of small and medium companies. The convergence type of small and medium companies accepted two levels including technology and industry and value improvement and creation suggested by Deloitte(2009) and it was classified into technology improvement-market expansion type, technology improvement-market creation type, technology creation-market expansion type, and technology creation-market creation type based on the companies introduced in the excellent casebook of convergence and integration technology development business of small and medium companies(August 2011). As a result, it was shown as 5 cases of technology improvement-market expansion, 4 cases of technology improvement-market creation, 3 cases of technology creation-market expansion, and 1 case of technology creation-market creation among the total 13 cases. Therefore, small and medium companies are focusing on technology improvement than technology creation and market expansion than market creation. What we can understand through cases analysis on convergence types of small and medium company is that it is very difficult for small and medium companies to create new technology or new market through convergence. Thus, small and medium companies consider market expansion through technology improvement as the objective and result of convergence. It is important to create new technology or new industry to cultivate new growth engines of the nation, but policy support that cares about reality of small and medium companies must be considered at the same time.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.41-46
• /
• 2021

The method of the edge detection algorithm based on grayscale mathematical morphology has the advantage that image noise can be removed and processed in parallel, and the operation speed is fast. However, the method of detecting the edge of an image using a single structural scale element may be affected by image information. The characteristics of grayscale morphology may be limited to the edge information result of the operation result by repeatedly performing expansion, erosion, opening, and containment operations by repeating structural elements. In this paper, we propose an edge detection algorithm that applies a structural element with strong directionality to noise and then applies weighted entropy to each pixel information in the element. The result of applying the multi-scale structural element applied to the image and the result of applying the directional weighted entropy were compared and analyzed, and the simulation result showed that the proposed algorithm is superior in edge detection.

• Journal of Families and Better Life
• /
• v.27 no.5
• /
• pp.25-42
• /
• 2009

This study examines the actual state of using digital convergence products by consumers, and analyzes the expectation that consumers have regarding digital convergence products and the actual satisfaction of the digital convergence products. In addition, it analyzes factors affecting the satisfaction with digital convergence products. First, mobile phones, which 99.4% of those surveyed had, cameras, which 90.6% had, and mp3s, which 71.8% had, were found to be necessities. Second, the ratio of owning digital convergence products was 79.5%, 48.1%, and 52.4%, respectively. In the case of a mobile phones, a digital convergence type is already common. Third, regarding the reason for purchasing digital convergence products, they chose convergence products because there was no product with a simple function that they wanted to have: 38.2% in terms of a mobile phone, 47.2% for a camera, and 28.2% for an mp3. This shows that a consumer's choice was infringed in a great deal at the back of remarkable quantitative growth in digital convergence products. Fourth, the analysis of the factor regarding the consumer's expectation on digital convergence products showed 3 kinds of factors, i.e., expectation of benefit, expectation of risk, and expectation of situation. Fifth, as a result of analyzing the structural model regarding the effect on satisfaction by a consumer's expectation and the outcome on digital convergence products, all the expectations and outcomes of benefit, risk, and situation did not have a direct effect on satisfaction. Only an indirect effect through inconsistency showed a statistical significance.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.446-474
• /
• 2019

In conjunction with securing R&D competitiveness through technology convergence, there is a growing interest in the strategy to derive innovation based on the measurement of convergence. In this paper, we present a data-based model that suggests convergence strategies for the research projects of government research institutes (GRIs) in Korea. The convergence characteristics of the research projects are represented by inherent attributes of technology and behavioral attributes of actors. The measuring process of the proxy variables (Rao-Stirling and Herfindahl-Hirschman Indices) for each attributes are proposed. These two indices are used to construct the convergence diagram, through which the research projects of GRIs are distributed into four areas: AllianceIntra, Alliance-Inter, Competition, Mission-Oriented. Based on the convergence diagram proposed in this study the convergence index is measured to derive 30 convergence research areas of GRIs. As a result, we expect to provide appropriate guidelines for setting the policy direction of the convergence research projects.

• Knowledge Management Research
• /
• v.12 no.1
• /
• pp.53-76
• /
• 2011

This study aims to examine the effects of on premium convergence products buying behavior. This paper analyzed the positive attitude formation using the basic and extended TAM and also revealed how the positive premium convergence product attitude relate to relationship purchasing intention and word of mouth intention. The samples of 562 consumer indicate that the antecedents are consist of four dimension(perceived usefulness, perceived ease of use, social value) and attitude is developed into buying intention and word of mouth intention. We have reached the following conclusion about the antecedents and outcomes factors of customer attitude for the launch of premium convergence product. First, perceived usefulness, perceived delight, and social value had a positive effect on customer attitude but perceived ease of use did not. Second, we found that customer attitude had a positive effect on purchase intention and word-of mouth intention. Finally, interaction effect of perceived usefulness/perceived delight and social value had a positive effect on customer attitude. Our findings suggested that adoptian and diffusion of premium convergence product is influenced by several behavior factors. Managerially, our result emphasize that premium convergence products must satisfy not only the perceived usefulness/delight but also social value that consumers are seeking in order to be successful in the market. The theoretical and practical implications of these findings are discussed as well.

• Journal of the Korea Convergence Society
• /
• v.6 no.3
• /
• pp.37-49
• /
• 2015

This study is to suggest the needs of laughter recreation convergence education as educational program to promote leisure use and happiness with the expectation that laughter recreation education will generate positive effect positive attitude and psychological happiness. So we prove that this education contributes to one's happy life through this study since it arouses positive changes on behavior. We included 108 Sampling targets and 216 copies of questionnaires to be done before and after education. As a result, partial factors of positive attitude on laughter recreation convergence education had a good influence on psychological happiness and there were differences between before and after the education. So this proves that it is meaningful to have laughter recreation convergence education.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.152-161
• /
• 2017

This study aims to analyze what is necessary for realization of convergence smart city service, and what is the priority order for it. First, the concept is set up through the theoretical review about convergence smart city service. Second, conduct in-depth interviews with smart-city related experts and derive the necessary elements to implement convergence smart city service. Third, derive priorities by subdividing the derived elements and utilizing the AHP method. The result of this study is expected to contribute to the development of convergence smart city service by deriving what should be considered for implementation of convergence smart city service.