• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.212-216
• /
• 2011

태양광 발전 시스템의 고장검출은 고장으로 인해 발생되는 기술적 및 경제적 손실을 최대한 줄이기 위한 첨단 기술로 각광을 받고 있다. 본 논문은 푸리에 신경회로망과 확률론적 의사결정법을 이용한 태양광 발전 시스템의 새로운 고장진단 알고리즘을 제안한다. 우선 태양광 시스템의 동적 모델링을 위하여 최급강하 기반 최적화 기법을 통해 신경회로망 모델을 구성하며 GLRT 알고리즘을 이용하여 태양광 시스템의 확률론적 고장검출 기법을 제안한다. 제안한 고장검출 알고리즘의 타당성 검증을 위하여 태양광 고장검출 테스트베드를 제작하여 실시간 실험을 실시하였으며 이 때 태양광으로부터의 신호는 직류 전력선 통신을 이용하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.329-337
• /
• 2016

With the increasing deployment of distributed generators in the distribution system, a very large search space is required when dynamic programming (DP) is applied for the optimized dispatch schedules of voltage and reactive power controllers such as on-load tap changers, distributed generators, and shunt capacitors. This study proposes a new optimal voltage and reactive power scheduling method based on dynamic programming with a heuristic searching space reduction approach to reduce the computational burden. This algorithm is designed to determine optimum dispatch schedules based on power system day-ahead scheduling, with new control objectives that consider the reduction of active power losses and maintain the receiving power factor. In this work, to reduce the computational burden, an advanced voltage sensitivity index (AVSI) is adopted to reduce the number of load-flow calculations by estimating bus voltages. Moreover, the accumulated switching operation number up to the current stage is applied prior to the load-flow calculation module. The computational burden can be greatly reduced by using dynamic programming. Case studies were conducted using the IEEE 30-bus test systems and the simulation results indicate that the proposed method is more effective in terms of saving electric charges and improving the voltage profile than loss minimization.

• 한국멀티미디어학회논문지
• /
• 제15권3호
• /
• pp.312-322
• /
• 2012

The paper presents an approach for recognizing the broken area of the traffic signs. The method is based on the Recognition System for Traffic Signs (RSTS). This paper describes an approach to using the location histogram matching for the broken traffic signs recognition, after the general process of the image detection and image categorization. The recognition proceeds by using the SIFT matching to adjust the acquired image to a standard position, then the histogram bin will be compared preprocessed image with reference image, and finally output the location and percents value of the broken area. And between the processing, some preprocessing like the blurring is added in the paper to improve the performance. And after the reorganization, the program can operate with the GPS for traffic signs maintenance. Experimental results verified that our scheme have a relatively high recognition rate and a good performance in general situation.

• 생태와환경
• /
• 제53권2호
• /
• pp.138-147
• /
• 2020

The Singil Stream, flowing into an artificial lake, Lake Shihwa (South Korea), experiences a strong anthropogenic pressure with continuous organic matter (OM) inputs from rural, urban, and industrial areas. In this study, we investigated suspended particulate matter (SPM) and streambed sediments collected along the Singil Stream in 2014 and 2016, by applying a dual element approach (δ¹³C and δ¹⁵N) to identify OM sources. The SPM and streambed sediment samples from the indusrial area showed higher organic carbon and nitrogen concentrations (or contents) than those from the other areas, with distinctively lower δ¹⁵N values. Accordingly, our dual element approach indicates that the industrial area was the predominant OM source influencing OM quality and thus water quality of the Singil Stream flowing into Lake Shihwa during the study periods. However, further studies are necessary to better constrain OM sources in the Singil Stream since OM sources from the industrial area appear to be complex.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1715-1725
• /
• 1998

A two-dimensional transient inverse heat conduction problem involving the estimation of the unknown location, ($X^*$, $Y^*$), and timewise varying unknown strength, $G({\tau})$, of a line heat source embedded inside a rectangular bar with insulated boundaries has been solved simultaneously. The regular conjugate gradient method, RCGM and the modified conjugate gradient method, MCGM with adjoint equation, are used alternately to estimate the unknown strength $G({\tau})$ of the source term, while the parameter estimation approach is used to estimate the unknown location ($X^*$, $Y^*$) of the line heat source. The alternate use of the regular and the modified conjugate gradient methods alleviates the convergence difficulties encountered at the initial and final times (i.e ${\tau}=0$ and ${\tau}={\tau}_f$), hence stabilizes the computation and fastens the convergence of the solution. In order to examine the effectiveness of this approach under severe test conditions, the unknown strength $G({\tau})$ is chosen in the form of rectangular, triangular and sinusoidal functions.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.138-148
• /
• 2016

Measurement of elastic constants is crucial for engineering aspects of predicting the behavior of materials under load as well as structural health monitoring of material degradation. Ultrasonic velocity measurement for material properties has been broadly used as a nondestructive evaluation method for material characterization. In particular, pulse-echo method has been extensively utilized as it is not only simple but also effective when only one side of the inspected objects is accessible. However, the conventional technique in this approach measures longitudinal and shear waves individually to obtain their velocities. This produces a set of two data for each measurement. This paper proposes a simultaneous sensing system of longitudinal waves and shear waves for elastic constant measurement. The proposed system senses both these waves simultaneously as a single overlapped signal, which is then analyzed to calculate both the ultrasonic velocities for obtaining elastic constants. Therefore, this system requires just half the number of data to obtain elastic constants compared to the conventional individual measurement. The results of the proposed simultaneous measurement had smaller standard deviations than those in the individual measurement. These results validate that the proposed approach improves the efficiency and reliability of ultrasonic elastic constant measurement by reducing the complexity of the measurement system, its operating procedures, and the number of data.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.129-132
• /
• 2001

본 논문은 3 관성시스템의 진동억제를 위한 강인한(robust) 제어기의 설계법을 제안하고 이를 simulation 을 통하여 확인하는데 있다. 일반적으로 관성 시스템의 제어 문제는 결국. 시스템 자체에서 발생하는 진동을 최대한 억제하면서 빠른 시간에 원하는 위치에 출력을 가져가는 데 있다. 이 경우 문제로 되는 것은 시스템의 모델링 과정에서 발생하는 플랜트의 불확실성과 parameter 변동이다. 여기서는 일반적인 강인한 제어기 설계 이론의 하나인 $H_{\infty}$ 이론이 가지는 단점인 제어기의 보수성을 극복하면서, 동시에 출력의 과도응답특성을 개선하기 위한 방법으로 $H_2$ 이론을 병용하고 이를 LMI 이론으로 해석하였다. 이 과정에서 3 관성시스템에 LMI 이론을 적용하기 위한 일반화플랜트의 모형을 제시하고 이것의 유효성을, 모델의 불확실성과 parameter변동을 동시에 고려한 simulation을 통하여 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제21권12호
• /
• pp.165-171
• /
• 2016

This study analyzes the relative importance of the introducing factors for the critical success factors in the implementation stage of the lifecycle of ERP system using Delphi technique and Analytic Hierarchy Process(AHP). In the 1st layer of the hierarchy, technical factor is evaluated as the most important factor among organizational, technical, and supplier factors. In the 2nd layer, choosing a proper ERP package is evaluated as the most important factor within 15 factors followed by process-oriented approach, technical suitability, minimized customization, integration and association of system with trading parter, association with legacy systems, and support and involvement of top management. As a result of this analysis enterprise should choose an ERP package that is suitable to its business environment, and make the best use of(take full advantage of) best practice that ERP package provides to optimize the existing business procedure or process(to approach the existing business procedure or process). This study also shows the range of customization of the features provided by the ERP package should be minimized.

• 융합신호처리학회논문지
• /
• 제4권3호
• /
• pp.15-20
• /
• 2003

핸즈프리 마이크를 이용한 원격회의나 원격 통신 시스템과 같은 몇 가지의 응용분야에서, 음성 신호는 주위 잡음뿐만 아니라 마이크와 스피커사이의 결합에 의해 발생하는 에코에 의해서 왜곡되기 쉽다. 게다가 채널 왜곡이나 부가적인 잡음을 포함한 환경 잡음들은 원래의 입력 음성신호에 영향을 미치리라 고려된다. 본 논문에서는, 이러한 핸즈프리 음성에 있어서의 음성 인식률을 향상시키기 위해 에코 제거기와 최대 사후 추정(MAP)을 이용한 새로운 접근방식을 소개한다. 이 접근방식에서, 제안된 시스템이 에코를 포함한 주위 잡음 환경에서의 핸즈프리 음성인식에 효과적이라는 것을 보여준다 또한, 실험 결과는 에코 제거기와 MAP 환경적응 기술의 결합 시스템이 에코와 잡음 환경에 잘 적응하는 것을 보여준다.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.435-449
• /
• 2020

This work presents the formulation of the isogeometric collocation method to solve the strong form equation of a unified and integrated approach of Reissner Mindlin plate theory (UI-RM). In this plate theory model, the total displacement is expressed in terms of bending and shear displacements. Rotations, curvatures, and shear strains are represented as the first, the second, and the third derivatives of the bending displacement, respectively. The proposed formulation is free from shear locking in the Kirchhoff limit and is equally applicable to thin and thick plates. The displacement field is approximated using the B-splines functions, and the strong form equation of the fourth-order is solved using the collocation approach. The convergence properties and accuracy are demonstrated with square plate problems of thin and thick plates with different boundary conditions. Two approaches are used for convergence tests, e.g., increasing the polynomial degree (NELT = 1×1 with p = 4, 5, 6, 7) and increasing the number of element (NELT = 1×1, 2×2, 3×3, 4×4 with p = 4) with the number of control variable (NCV) is used as a comparable equivalent variable. Compared with DKMQ element of a 64×64 mesh as the reference for all L/h, the problem analysis with isogeometric collocation on UI-RM plate theory exhibits satisfying results.