• The Journal of the Korean dental association
• /
• v.49 no.11
• /
• pp.670-678
• /
• 2011

Various sorts of dental devices for the dental treatment have been introduced and adopted during past several years. Dental Laser, among all devices, seems to be possible for applying to over the whole treatments and widely employed. Furthermore, this article is to introduce that Dental Laser is intended to care patients secured with the effectual treatment against Conventional procedures based upon its studies. The advantages of Dental Laser treatment-along with LLLT (Low Level Laser Therapy) effect, biostimulation effect, and minimal invasive technique - make the patients reduce their fear of the operation, lighten the inconvenience of post operation, and shorten the treatment period. In particular, it is worth considering that the use of laser-assisted therapies is associated with a marked reduction in the use of analgesics and anti-inflammatory medications compared with conventional procedures. This article is to state advantages and differences of Dental Laser treatment compared with Conventional procedures, and to emphasize to become well-acquainted with the precautions for safety and effective Dental Laser treatment. In case of operating Dental Laser with lack of the instructions, it will cause the unpredicted fatal results; therefore this treatment requires special care in its operation. Henceforward, it is anticipated that infinite treatment protocols will be introduced by applying Dental Laser, and this is to address the utilization of Dental Laser.

• The Korean Journal of Pain
• /
• v.36 no.2
• /
• pp.242-252
• /
• 2023

Background: Neck pain is a common problem in the general population and second only to low back pain in musculoskeletal problems. The aim of this study is to compare three different types of exercise training in patients with chronic neck pain. Methods: This study was conducted on 45 patients with neck pain. Patients were divided into 3 groups: Group 1 (conventional treatment), Group 2 (conventional treatment plus deep cervical flexor training), and Group 3 (conventional treatment plus stabilization of the neck and core region). The exercise programs were applied for four weeks, three days a week. The demographic data, pain intensity (verbal numeric pain scale), posture (Reedco's posture scale), cervical range of motion ([ROM] goniometer), and disability (Neck Disability Index [NDI]) were evaluated. Results: In all groups, a significant improvement was found in terms of pain, posture, ROM, and NDI values in all groups (P < 0.001). Between the groups, analyses showed that the pain and posture improved more in Group 3, while the ROM and NDI improved more in Group 2. Conclusions: In addition to conventional treatment, applying core stabilization exercises or deep cervical flexor muscle training to patients with neck pain may be more effective in reducing pain and disability and increasing ROM than conventional treatment alone.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.562-567
• /
• 2006

Micro-alloyed steel or heat-treatment-free used in clean technology have been replacing for conventional quenched-and-tempered structural steels since the micro-alloyed forging steel was developed in early 1970s in Germany for saving money of heat treatment, simplified process, short delivery and good productivity. In this paper, ball stud assembled in steering system for automobile was selected to compare conventional process making heat treatment with new process using high strength micro-alloyed steel without heat treatment. The conventional process for ball stud was composed of a total of 6 steps including upsetting, forward extrusion, machining, burnishing and tread rolling with heat treatment and shot blasting. As opposed to conventional process, newly proposed process for ball stud using the clean technology without heat treatment is simplified such as forward extrusion, heading, upsetting, forming having a flange shape and tread rolling. Also net shape forming process to achieve specified process not to include machined step fur manufacturing the ball stud was applied to newly simplified process since micro-alloyed steel is difficult to be formed.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.33 no.4
• /
• pp.1-22
• /
• 2020

Objectives: The purpose of this review is to evaluate the efficacy of moxibustion for stress urinary incontinence (SUI) in women. Methods: For relevant randomized controlled trials (RCTs), we searched the following databases from their inception to September 1, 2020: The Cochrane Library, PubMed, EMBASE, Chinese National Knowledge Infrastructure Database (CNKI), Koreanstudies Information Service System (KISS), Research Information Sharing Service (RISS), and National Digital Science Library (NDSL). The key search terms were 'stress urinary incontinence' and 'moxibustion'. Data extraction and assessment of risk of bias were conducted by two authors independently. Results: A total of 11 RCTs were finally included in this systematic review. In all studies, moxibustion treatment was applied as an adjuvant therapy to the conventional treatment, and the most common conventional treatment was pelvic floor muscle training (PFMT). The treatment group (conventional treatment plus moxibustion) showed statistically more significant effect than the control group (conventional treatment only) in various evaluation indicators including urinary incontinence frequency, 1 hour urine pad test, quality of life, the clinical efficacy rate, and pelvic muscle strength. Conclusions: In this study, we investigated the efficacy of moxibustion as an adjuvant therapy for female SUI patients. Further studies are needed to supplement the safety of moxibustion and the evaluation of moxibustion dose.

• The Journal of Korean Medicine
• /
• v.39 no.4
• /
• pp.177-182
• /
• 2018

Background: Breast cancer is a treatable disease, but some women reject conventional treatment in favor of unproven "alternative therapies," which may have serious implications for their survival. Therefore, a process is needed to lead them to more appropriate treatment choices. Case presentation: Here, we present the case of a 51-year-old Korean female diagnosed with early-stage breast cancer (stage IIB, T2N1M0) in Nov. 2015. She refused a standard surgical resection together with chemotherapy and opted instead for moxibustion by nonmedical personnel. Consequently, her preference for alternative therapy without conventional treatment exacerbated her disease. Just a little over a year later, integrative cancer treatment, including chemotherapy based on histological founding, and complementary treatment, comprised of acupuncture, moxibustion, and herbal medicine, were administered for 5 months. Finally, she successfully underwent modified radical mastectomy showing a pathological complete response. She received only adjuvant chemotherapy without any alternative medicine afterwards, and she maintained a good status without recurrence. Conclusion: In the case of breast cancer patients who are resistant to surgery and chemotherapy, integrative therapy considering adverse effects from conventional treatment should be preferred to bitter opposition to alternative medicine.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1221-1228
• /
• 2005

Carbon electrode was applied to a wastewater treatment system as biofilm media. The spatial distribution of heterotrophic bacteria in aerobic wastewater biofilm grown on carbon electrode was investigated by scanning electron microscopy, atomic force microscopy, and biomass measurement. Five volts of electric oxidation and reduction potential were charged to the carbon anode and cathode of the bioelectrochemical system, respectively, but were not charged to electrodes of a conventional system. To correlate the biofilm architecture of bacterial populations with their activity, the bacterial treatment efficiency of organic carbons was measured in the bioelectrochemical system and compared with that in the conventional system. In the SEM image, the biofilm on the anodic medium of the bioelectrochemical system looked intact and active; however, that on the carbon medium of the conventional system appeared to be shrinking or damaging. In the AFM image, the thickness of biofilm formed on the carbon medium was about two times of those on the anodic medium. The bacterial treatment efficiency of organic carbons in the bioelectrochemical system was about 1.5 times higher than that in the conventional system. Some denitrifying bacteria can metabolically oxidize $H_{2}$, coupled to reduction of $NO_{3}^{-}\;to\;N_{2}$. $H_{2}$ was produced from the cathode in the bioelectrochemical system by electrolysis of water but was not so in the conventional system. The denitrification efficiency was less than $22\%$ in the conventional system and more than $77\%$ in the bioelectrochemical system. From these results, we found that the electrochemical coupling reactions between aerobic and anaerobic reactors may be a useful tool for improvement of wastewater treatment and denitrification efficiency, without special manipulations such as bacterial growth condition control, C/N ratio (the ratio of carbon to nitrogen) control, MLSS returning, or biofilm refreshing.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.112-119
• /
• 2014

Ohmic heating uses electric resistance heat which occurs equally and rapidly inside food when the electrical current is transmitted into. Prior to the study, we have researched the potato starch's thermal property changes during ohmic heating. Comparing with conventional heating, the gelatinization temperature and the range of potato starch treated by ohmic heating are increased and narrowed respectively. Herein, we have studied thermal property changes of wheat, corn, potato and sweet potato starch by ohmic heating as well as conventional heating. And then we measure the water holding capacity of starches. Annealing of starch is a heat treatment method heated at 3~4% below the gelatinization point. This treatment changes the starch's thermal property. In the DSC analysis of this study, the $T_o$, $T_p$, $T_c$ of all starch levels have increased, and the $T_c$-$T_o$ narrowed. In the ohmic heating, the treatment sample is extensively changed but not with the conventional heating. From the ohmic treatment, increases from gelatinization temperature are potato ($8.3^{\circ}C$) > wheat ($5.3^{\circ}C$) > corn ($4.9^{\circ}C$) > sweet potato ($4.5^{\circ}C$), and gelatinization ranges are potato ($7.9^{\circ}C$), wheat ($7.5^{\circ}C$), corn ($6.1^{\circ}C$) and sweet potato ($6.8^{\circ}C$). In the case of conventional treatment, water holding capacity is not changed with increasing temperature but the ohmic heating is increased. Water holding capacity is related to the degree of gelatinization for starch. This result show that when treated with below gelatinization temperature, the starches are partly gelatined by ohmic treatment. When viewing the results of the above, ohmic treatment is enhanced by heating and generating electric currents to the starch structure.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.11-20
• /
• 2017

Objective: This randomized controlled trial aimed to compare the stability of mandibular arch orthodontic treatment outcomes between passive self-ligating and conventional systems during 6 months of retention. Methods: Forty-seven orthodontic patients with mild to moderate crowding malocclusions not requiring extraction were recruited based on inclusion criteria. Patients (mean age $21.58{\pm}2.94years$) were randomized into two groups to receive either passive self-ligating ($Damon^{(R)}$ 3MX, n = 23) or conventional system (Gemini MBT, n = 24) orthodontic treatment. Direct measurements of the final sample comprising 20 study models per group were performed using a digital caliper at the debonding stage, and 1 month, 3 months, and 6 months after debonding. Paired t-test, independent t-test, and non-parametric test were used for statistical analysis. Results: A significant increase (p < 0.01) in incisor irregularity was observed in both self-ligating and conventional system groups. A significant reduction (p < 0.01) in second interpremolar width was observed in both groups. Mandibular arch length decreased significantly (p = 0.001) in the conventional system group but not in the self-ligating system group. A similar pattern of stability was observed for intercanine width, first interpremolar width, intermolar width, and arch depth throughout the 6-month retention period after debonding. Comparison of incisor irregularity and arch dimension changes between self-ligating system and conventional system groups during the 6 months were non-significant. Conclusions: The stability of treatment outcomes for mild to moderate crowding malocclusions was similar between the self-ligating system and conventional system during the first 6 months of retention.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.24-28
• /
• 1998

A conventional treatment machine shapes x-ray fields by a set of dense metal collimators(jaws) built into the machine. These collimators are positioned by the therapist using hand controls in the treatment room, and usually remain stationary during treatment. The collimator jaws of treatment machines produce rectangular beams. Conventional beam shaping is accomplished through the use of a combination of these collimator jaws and secondary custom beam blocks attached to the accelerator beyond the collimator Jaws. The jaw positions for a particular field can be retrieved from a computer. One application of this increased capability is replacement of beam blocks for field-shaping with the MLC. There are three basic applications of the MLC. The first application is to replace conventional blocking. A second function of the MLC is related to conformal therapy, adjusting the field shape to match the beam's eye view projection of a planning target volume during treatment. The third application is the use of the MLC to achieve beam intensity modulation. The aim of this paper is to provide basic principle and to state fundamental concepts needed to implement the use of a multileaf collimator in the conventional clinical setting. The use of MLC field shaping is likely to save time and to incur a lower operating cost when compared to the use of beam blocks.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.10-16
• /
• 1999

Leaves harvested were separated with visual characters into 2 classes such as immature and mature leaves. In the curing process, the prolonged yellowing treatment during yellowing stage was automatically controlled at the different stalk position, and condition of curing process after this period was all the same with conventional ones. In case of prolonged yellowing in immature leaves, increase of price per kg reached to 8 % compared with those of conventional ones. In physical properties, filling capacity and shatter index was decreased with the degree of maturity, and it was equal level in filling capacity of immature leaves between curing method, while shatter index was decreased in prolonged yellowing treatment than that of conventional ones. There was no difference in chemical components between immature leaves of prolonged yellowing and conventional ones. As to the prolonged yellowing of immature leaves, there was decreased in citric and malic acid contents of the nonvolatile organic acids, and it was equal level in all higher fatty acids content of leaves cured by prolonged yellowing treatment compared with in that of conventional curing method. The contents of key compounds such as solanone, damascenone, damascone in the essential oil were lower in prolonged yellowing of immature leaves than those of mature leaves cured by conventional ones.