• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.53-58
• /
• 1998

A buried channel poly-Si TFT (BCTFT) for application of high performance integrated circuits has been proposed and fabricated. BCTFT has unique features, such as the moderately-doped buried channel and counter-doped body region for conductivity modulation, and the fourth terminal entitled back bias for preventing kink effect. The n-type and p-type BCTFT exhibits superior performance to conventional poly-Si TFT in ON-current and field effect mobility due to moderate doping at the buried channel. The OFF-state leakage current is not increased because the carrier drift is suppressed by the p-n junction depletion between the moderately-doped buried channel and the counter-doped body region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1C
• /
• pp.1-8
• /
• 2009

Cooperative diversity is a novel technique to improve diversity gains, capacity gains, and energy saving. This technique involves multiple terminals sharing resources in order to build a virtual antenna array in a distributed fashion. In this paper, we propose a multi-user cooperative diversity protocol called Relay-assisted Multiple Access Channel(R-MAC) that allows multiple source terminals to transmit their signals simultaneously and the relay terminal forwards the aggregated signal received from the source terminals to the destination terminal. The proposed protocol converts the distributed antenna channels into an effective MIMO channel by exploiting a relay, increasing both diversity gain and system throughput. We investigate the performance of the proposed protocol in terms of outage probability and diversity-multiplexing tradeoff where we assume block fading channel environment. Our simulation results show that the proposed protocol outperforms direct transmission in the high spectral efficiency regime where the conventional cooperative diversity protocols cannot outperform direct transmission.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.293-296
• /
• 1999

In conventional automatic container-terminal, the gantry cranes are operated manually or semi-automatically. But UGC is an unmanned-operated gantry crane and the positioning information for UGC is supplied only by position-measuring devices. In order to enhance the operation efficiency of UGC, it is required that the position-measuring devices have long maintenance period and are not sensitive to the weather and environment condition. And in order to be used practically in container terminal, the cost of position-measuring devices is not higher than currently used measuring devices. In the study, it is discussed the requirements for position-measuring devices in UGC, And it is studied on the measuring devices suitable to UGC. From this study, it is expected that the combination of a rotary encoder and a ferrous metal detector is useful for position-measuring devices in UGC.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.11
• /
• pp.1036-1039
• /
• 1996

Synthetic lipoidal peptides based on viral protein sequences have been prepared. These peptides contain an N-palmitoyl group at the N-terminal residue, which is a modified cysteine, containing a S-[2,3-bis(acyloxy)-(2-R,S)-propyl] moiety. When this residue (Pam3Cys) is at the N-terminus of a synthetic peptide, it acts as potent immunoadjuvant to enhance both IgM and IgG antibody responses to the attached peptide. Conventional analytical procedures (e.g., Edman degradation and amino acid analysis) are either not applicable due to the N-terminal modification, or do not provide confirmation of the intact structure. Chromatographic analysis is also hindered by the tendency of these lipoidal Pam3Cys peptides to form large aggregates, and in some cases to be permanently adsorbed on reversed phase columns. We have applied several mass spectrometric techniques, including fast atom bombardment (FAB), electrospray ionization (ESI) and matrix assisted laser desorption ionization (MALDI) to characterize the intact structures of a number of different Pam3Cys synthetic peptides. The MALDI-MS has been found to be the most sensitive for the analysis of the structure of Pam3Cys peptides.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.829-841
• /
• 1990

On assuming that the transmission speed of the original information is the fifth-order transmission speed of the Korea digital multiplex hierarchy (564.992Mb/s), this paper proposes a new structure of the transmission line frame at the terminal repeater system, in order to not only maintain and conserve 565Mb/s optical fiber transmission system but also make the B.S.I. of digital communication network for the optical transmission. And the structure uses the mBIZ transmission line code, which is considered the optimal transmission line code of conventional transmission line codes. System hardware of the transmission line frame structure proposed in this paper is consisted by a method of pulse stuffing after converting the speed of the original information signal sequence at the terminal repeater system for 565Mb/s optical transmission. As a result of this, we can prevent the optical transmission system from a domino phenomenon, the phenomenon of the continuous error multiplication of systems by the transmission error, and suppress timing jitter and the identical consecutive digit number. And also we can improve SNR of the optical transmission system about 2dB because of raising total BER at the optical terminal system up to 10.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.759-764
• /
• 1987

The design and application of optimal control technique to the rotary shearing system is mentioned in this paper. To maximize the accuracy in both shearing length and blade speed at shearing, time-varying gain patterns for closed loop control are designed on the basis of fixed terminal time constrained optimal regulator. The performance accuracy in real application has greatly improved than the conventional way of shearing control.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.134-148
• /
• 1994

A full two-dimensional MOSFET simulator utilizing the Mixed Particle Monte Carlo method is introduced. Particle simulation for both electrons and holes are self-consistently coupled with Poisson 's equation. To demonstrate the performance of the simulator, steady state and transient state solutions of the terminal characteristics and the internal physical quantities are obtained for 0.25$\mu$m MOSFETs with three different structures` conventional single drain, LDD and GOLD MOSFET structures.

• The Magazine of the IEIE
• /
• v.13 no.1
• /
• pp.86-95
• /
• 1986

The basic physical principles involved in the operation of monolithic magnetic sensors are reviewed and technological aspects outlined. More or less conventional devices based on Hall effect, magnetoresistance or current path deflection are described. It is shown that such sensors with 2, 3, 4 or 5 terminal contacts are achievable with standard silicon integrated circuit process. Several kinds of magnetodiodes (p+nn+,p+n, Schottky, MOS, memory, CMOS) have been fabricated on Si and on SOS films and present attractive properties. Finally, the magneto-transistor family is discussed with emphasis to split-terminals, CMOS, unijunction and fila-mentary devices.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.111-115
• /
• 2012

Generally, brushless DC motor(BLDCM) driving system uses hall sensors or encoders as the mechanical position or speed sensor. It is necessary to achieve the informations of rotor position for driving trapezoidal type brushless DC motor without any position sensor. In this paper, the commutation signals are obtained without the motor neutral voltage, multistage analog filters, A/D converters, or the complex digital phase shift circuits which are indispensable in the conventional sensorless control algorithms. In the proposed method, in stead of detecting the zero crossing point of the nonexcited motor back electromagnetic force for the average motor terminal to neutral voltage, the commutation signal are extracted directly from the specific average line to line voltage with low-pass filter, adder and comparators circuit. In contrast to conventional methods, the neutral voltage is not need; therefore, the commutation signals are insensitive to the common mode noise. Moreover, the complex phase shift circuit can be eliminated. The effectiveness of the proposed method is verified through simulation results.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.187-190
• /
• 2005

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as WCDMA system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a WCDMA digital transmission system. The average frame error rate degradations are presented. From these experimental results, we show that in all practical cases UWB system can coexist with WCDMA terminal without causing any dangerous interference.