• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.701-704
• /
• 2003

Scoliosis is a complex musculoskeletal dieses requiring 3-D treatment with surgical instrumentation. Conventional corrective surgery for scoliosis was done based on empirical knowledge without information of the optimum position and operative procedure. Frequently, post operative change of rib hump increase and shoulder level imbalance caused serious problems in the view of cosmetics. To investigate the effect of correction surgery, a reconstructed 3-D finite element model for King-Moe type V was developed. Vertebrae, clavicle and other bony element were represented using rigid bodies. Kinematic joints and nonlinear bar elements used to represent the intervertebral disc and ligaments according to reported experimental data. With this model, optimization technique was also applied in order to define the optimal magnitudes of correction. The optimization procedure corrected the scoliotic deformities by reducing the objective function by more than 94%. with an associated reduction of the scoliotic descriptors mainly on the frontal thoracic curve.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.52-56
• /
• 1993

An efficient method is presented for determining transient responses of locally nonlinear structures using substructure eigenproperties and Lagrange multiplier technique. The method is based upon the mode synthesis formulation procedure, but does not construct the equations of motion of the combined whole structure compared with the conventional methods. For modal bases of each linear substructure, either fixed or free interface modes can be employed. The transient analysis is based upon the recurrence discrete-time state equations and offers the simplicity of the Euler integration method without requiring small time increment and iterative solution procedure. Numerical examples reveal that the method is very accurate and efficient in calculating transient responses compared with the direct numerical integration method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.579-584
• /
• 1998

This paper presents an efficient algorithm which determines the parameters of discrete PID controller. The proposed algorithm is an algebraic method to obtain controller parameters using ROM(Reduced Order Model), which can not only make design procedure simple but also reduce the computational burden required for controller implementation. Also, by solving a set of linear equations based on least squares method, the proposed method can make the controller design procedure systematic. Simple examples are given to demonstrate the effectiveness of our method when compared with widely-used conventional method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1581-1590
• /
• 1995

Recently, advanced video coding techniques using segmentation technique have been actively researched as candidates for video coding of MPEG-4 standard. The conventional segmentation techniques are unsuitable for real-time process because they have sequential structure. In this paper, we propose a new image segmentation technique using competitive learning neural network for vector quantization. The proposed segmentation procedure consist of prefiltering, primary and secondary segmentation, and a small region ellimination process. Primary segmentation segments input image in detail. Secondary segmentation merges similar region using a repetitive FSCL(Frequency sensitive competive learning) neural network. In this process, it is possible to segment an image from high resolution to low resolution by adjusting the number of repetition. Finally, small regions are merged into adjacent regions. Experimental results show that the procedure described yields reconstructed images of reasonably acceptable quality at bit rates of 0. 25 - 0.3 bit/pel.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.261-265
• /
• 2011

An adaptive wavelet transformation method with high order accuracy is proposed to allow efficient and accurate flow computations. While maintaining the original numerical accuracy of a conventional solver, the scheme offers efficient numerical procedure by using only adapted dataset. The main algorithm includes 3rd order wavelet decomposition and thresholding procedure. After the wavelet transformation, 3rd order of spatial and temporal accurate high order interpolation schemes are executed only at the points of the adapted dataset. For the other points, high order of interpolation method is utilized for residual evaluation. This high order interpolation scheme with high order adaptive wavelet transformation was applied to unsteady Euler flow computations. Through these processes, both computational efficiency and numerical accuracy are validated even in case of high order accurate unsteady flow computations.

• Communications for Statistical Applications and Methods
• /
• v.22 no.2
• /
• pp.173-180
• /
• 2015

We propose a selection procedure of principal components in principal component regression. Our method selects principal components using variable selection procedures instead of a small subset of major principal components in principal component regression. Our procedure consists of two steps to improve estimation and prediction. First, we reduce the number of principal components using the conventional principal component regression to yield the set of candidate principal components and then select principal components among the candidate set using sparse regression techniques. The performance of our proposals is demonstrated numerically and compared with the typical dimension reduction approaches (including principal component regression and partial least square regression) using synthetic and real datasets.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.2-3
• /
• 2005

Air gap control method using a conventional actuator for near field recording technology has been reported. To achieve good performance in the air gap servo and further experiments, the assembling between OL and SIL is the critical procedure. A lens set with NA 1.45 at 405 m has been assembled and tested by using a Twyman-Green interferometer. The tolerance of assembling is very tight and the designing and adjusting procedure must be carefully controlled.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.4
• /
• pp.227-233
• /
• 2004

In stressed power system due to the presence of increased nonlinearity and the existence of nonlinear modal interactions. there exist some limitations to the use of conventional linear system theory to identify the optimum sites for a controller. This paper suggests an approach based on the method of normal forms to identify the optimum sites for controllers with incorporating the nonlinear interaction . In this paper, nonlinear participation factors and coupling factors are proposed as measures of the nonlinear interactions, and identification procedure of optimum sites for a controller is also proposed. The proposed procedure is applied to the 10-generator New England System and the KEPCO System in the year of 2010, and the results illustrate its capabilities.

• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1127-1141
• /
• 2015

The optimum design of liquid column dampers in seismic vibration control considering system parameter uncertainty is usually performed by minimizing the unconditional response of a structure without any consideration to the variation of damper performance due to uncertainty. However, the system so designed may be sensitive to the variations of input system parameters due to uncertainty. The present study is concerned with robust design optimization (RDO) of liquid column vibration absorber (LCVA) considering random system parameters characterizing the primary structure and ground motion model. The RDO is obtained by minimizing the weighted sum of the mean value of the root mean square displacement of the primary structure as well as its standard deviation. A numerical study elucidates the importance of the RDO procedure for design of LCVA system by comparing the RDO results with the results obtained by the conventional stochastic structural optimization procedure and the unconditional response based optimization.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2457-2466
• /
• 1993

A simple method is presented for determining transient responses of locally nonlinear structures using substructure eigenproperties and Lagrange multiplier technique. Although the method is based upon the mode synthesis formulation procedure, the equations of the combined whole structure are not constructed compared with the conventional methods. Lagrange multi-pliers are used to enforce the conditions of geometric compatibility between the substructure interfaces and they are treated as external forces on each substructure itself. Substructure eigenvalue problem is defined with the substructure interface free of fixed. The transient analysis is based upon the recurrence discrete-time state equations and offers the simplicity of the Euler integration method without requiring small time increment and iterative solution procedure. Numerical examples reveal that the method is very accurated and efficient in calculating transient responses compared with the direct numerical integration method.