• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.579-588
• /
• 2018

Purpose : To analyze the eyeglasses supply system for ametropic soldiers in ROK military. Methods : We investigated and analyzed the supply system of eyeglasses for the ametropic soldiers provided by the Korean military. The refractive powers and corrected visual acuity were measured for 37 ametropic soldiers who wear insert glasses for ballistic protective and gas-masks supplied by the military based on their habitual prescriptions. Full correction of refractive error was prescribed for subjects having less than 1.0 of distance visual acuity, and comparison was held for inspecting the changes in corrected visual acuity. Suggestions were provided for solving the issues regarding current supplying system, and this study investigated the applicabilities for utilizing professional optometric manpower. Results : The new glasses supplied by army for ametropic soldiers were duplicated from the glasses they worn when entering the army. The spherical equivalent refractive powers of the conventional, ballistic protective and gas-mask insert glasses supplied for 37 ametropic soldiers were $-3.47{\pm}1.69D$, $-3.52{\pm}1.66D$ and $-3.55{\pm}1.63D$, respectively, and the spherical equivalent refractive power of full corrected glasses was $-3.79{\pm}1.66D$, which showed a significant difference(p<0.05). The distant corrected visual acuity measured at high and low contrast(logMAR) of conventional, ballistic protective and gas-mask insert glasses were $0.06{\pm}0.80$, $0.21{\pm}0.82$, $0.15{\pm}0.74$, $0.34{\pm}0.89$, $0.10{\pm}0.70$ and $0.22{\pm}0.27$, respectively, while the corrected visual acuity by full corrected glasses were increased to $0.02{\pm}1.05$, $0.10{\pm}0.07$, $0.09{\pm}0.92$, $0.26{\pm}0.10$, $0.04{\pm}1.00$ and $0.19{\pm}1.00$, respectively. There was a significant difference(p<0.05) except for the case of the low contrast corrected visual acuity of the conventional and gas-mask insert glasses. The procedure for ordering, dispensing, and supplying military glasses consists of 5 steps, and it was found that approximately two weeks or more are required to supply from the initial examination. Conclusion : The procedure of supplying the military glasses showed three issues: 1) a lack of refraction for prescription system, 2) relatively long length of time required for supplying the glasses, 3) an inaccurate power of supplied glasses. In order to solve those issues, in the short term, education is necessarily required for soldiers on the measurement of the refractive powers, and in the near future, further standard procedures for prescription of glasses as well as the securement of optometric manpower are expected.

• Journal of Chest Surgery
• /
• v.30 no.12
• /
• pp.1197-1204
• /
• 1997

Between April 1981 and June 1996, 65 patients had aortic root replacement at our institution. Disease entities were pure aortic annuloectasia in 31 patients(47.7%), Stanford type A aortic dissection with annuloectasia in 8(43.1%), atherosclerotic aneurysm with aortic regurgitation in 4(6.2%), and paravalvular leakage after aortic valve replacement in 2(3.1 %). 34 patients(52.3%) had the clinical stigmata of the Marfan syndrome. The operative procedures were Bentall operation in 61 patients(93.8%); 3 of conventional procedure and 58 of Cabrol's modification, aortic valve-sparing operation in 2(3.1 %), and root replacement with homograft in 2(3.1%). Hospital deaths occurred in 3 patients(4.8%) because of uncontrolled bleeding(1) and bypass weaning failure due to low cardiac output(2), and all had emergency operation with Cabrol's procedure. Postoperative complications developed in 19(29.2%) patients and most of them were transient. Surviving 62 patients have been followed up to cumulative total 315.0 patient-years(mean 60.2 $\pm$42.4 months). Late deaths occurred in 7 patients(11.3%), aneurysmal changes of remaining aorta were detected in 12 patients(19.4%). Actuarial survival rate at 10 years was 72.0 $\pm$ 9.7%, and the subsequent aortic operation-free rate at 10 years was 68.0$\pm$ 8.9% In a multivariate analysis, Marfan syndrome, emergency operation, preoperative dissection, combined arch replacement, and total circulatory arrest emerged as significant risk factors for hospital death or subsequent aortic operation. Over 60 years of age was the only risk factor for late death. Our 16 years'cummulative experience shows that aortic root replacement, mainly by means of Cabrol's procedure, can be applied successfully to variety of aortic root disease. However, long-term follow up will be needed to determine the late result of aortic valve-saving operation and root replacement with homograft. When dissection is present or the distal native aorta is diseased in'Marfan patients, close follow-up is necessary because of the subsequent aneurysmal change of remaining aorta.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.235-240
• /
• 2002

Surgical-orthodontic treatment is an increasingly more common dental procedure whose unique psycho-social or psychological feature has not been fairly quantified objectively. Since the treatment of a surgical-orthodontic (or orthodontic) patient is part science and part art, a subjective recognition of a patient about his or her own treatment may be more important than technical success during and after treatment. Therefore, the knowledge of the patient's underlying psychological status could be useful in the prediction of patient's response to surgical-orthodontic (or orthodontic) treatment. The purpose of this study was to investigate and evaluate the psychological difference between conventional orthodontic patient and surgical-orthodontic patient by using locus of control (LOC) examination. Locus of control scale has been proven to be extremely useful in the prediction of a variety of human behaviors. Two types of locus of control data (I-score, Internal locus of control score : I-score, External locus of control score) were obtained for 42 surgical-orthodontic patients and randomly selected 42 conventional orthodontic patients (as a control group) matched for age and gender. No statistically significant difference was observed in the scale of internal and external locus of control between the groups of surgical-orthodontic patients and conventional orthodontic patients. However, in the group of surgical-orthodontic patients, males showed lower E-score (external locus of control score, higher internal locus of control tendency) than females. The results of this study suggested that the psychological background of surgical-orthodontic patients, in contrast with that of cosmetic surgery patients, has a similar disposition with that of orthodontic patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.71-78
• /
• 1997

Purpose : To collect beam data for dynamic wedge fields using conventional measurement tools without the multi-detector system, such as the linear diode detectors or ionization chambers. Materials and Methods : The accelerator CL 2100 C/D has two photon energies of 6MV and 15MV with dynamic wedge an91es of 15o, 30o, 45o and 60o. Wedge transmission factors, percentage depth doses(PDD's) and dose Profiles were measured. The measurements for wedge transmission factors are performed for field sizes ranging from $4\times4cm^2\;to\;20\times20cm^2$ in 1-2cm steps. Various rectangular field sizes are also measured for each photon energy of 6MV and 15MV, with the combination of each dynamic wedge angle of 15o 30o. 45o and 60o. These factors are compared to the calculated wedge factors using STT(Segmented Treatment Table) value. PDD's are measured with the film and the chamber in water Phantom for fixed square field. Converting parameters for film data to chamber data could be obtained from this procedure. The PDD's for dynamic wedged fields could be obtained from film dosimetry by using the converting parameters without using ionization chamber. Dose profiles are obtained from interpolation and STT weighted superposition of data through selected asymmetric static field measurement using ionization chamber. Results : The measured values of wedge transmission factors show good agreement to the calculated values The wedge factors of rectangular fields for constant V-field were equal to those of square fields The differences between open fields' PDDs and those from dynamic fields are insignificant. Dose profiles from superposition method showed acceptable range of accuracy(maximum 2% error) when we compare to those from film dosimetry. Conclusion : The results from this superposition method showed that commissionning of dynamic wedge could be done with conventional dosimetric tools such as Point detector system and film dosimetry winthin maximum 2% error range of accuracy.

• Sleep Medicine and Psychophysiology
• /
• v.8 no.1
• /
• pp.22-29
• /
• 2001

Objectives: Obstructive sleep apnea syndrome (OSA) is a moderately prevalent disorder. Even though much progress has been made in the diagnosis of this disorder, the cost-effectiveness of nocturnal polysomnography is undertermined and physicians and patients are still hesitant to undergo this procedure. The authors wanted to see the validity of chin press/tongue curl maneuver in estimating the severity of OSA which is easy to measure and was originally proposed by Simmons etc. by looking at the correlations between this score and the conventional respiratory disturbance indices. Methods: Forty-three sleep-related breathing disorder patients (28 OSA patients and 15 upper airway resistance syndrome (UARS) patients) who underwent investigation for posssible OSA were studied. Two conventional indices of OSA (apnea/hypopnea index (AHI) and oxygen saturation dip rate (SaO2 dips)), four other sleep variables (lowest SaO2, % of time with SaO2<90% (%SaO2 <90), % of sleep stage 1, mean length of SaO2 dips) and the score of Epworth sleepiness scale (ESS) were compared with the chin press score (CPS) which was newly revised by the author and ranges from 0 to 6. Results: The age of subjects was $45.95{\pm}12.47$ (range 14-76) and their average BMI was $25.98{\pm}3.61$ (range 19.65-37.64). There were no significant differences in age, sex and BMI except repiratory disturbance indices and ESS (p<0.05) between OSA and UARS group. Grouped median CPS of the all subjects was 4.14 (range 1-6). There was a remarkable relationship between CPS and diagnosis category (Likelihood Ratio $X^2$ test; $X^2$=17.41, df=5, p=0.004) and measures of association (Somers' $d=0.65{\pm}0.12$, t=4.83, p=0.000) indicated that CPS increased when the diagnosis changed from UARS to OSA. Spearman's rank correlations between CPS and SaO2 dips (R=0.83), between CPS and AHI (R=0.77) were good (p<0.001). Other variables except mean length of SaO2 dips showed good correlations with CPS as well (p<0.05). Regression analysis indicated that when CPS is 3 there is a provability of 0.35 to have AHI of less than 5. Conclusion: Chin press scores that can be measured easily is well correlation with the conventional sleep apnea indices. They may therefore provide a useful guide in diagnosing obstructive sleep apnea synrome.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.67-73
• /
• 2018

$[^{11}C]PIB$ synthesis has been performed by a loop-methylation and HPLC purification in our lab. However, this method is time-consuming and requires complicated systems. Thus, we developed an on-cartridge method which simplified the synthetic procedure and reduced time greatly by removing HPLC purification step. We compared 6 different cartridges and evaluated the $[^{11}C]PIB$ production yields and specific activities. $[^{11}C]MeOTf$ was synthesized by using TRACERlab FXC Pro and was transferred into the cartridge by blowing with helium gas for 3 min. To remove byproducts and impurities, cartridges were washed out by 20 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ solution (pH 5.1) and 10 mL of distilled water. And then, $[^{11}C]PIB$ was eluted by 5 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ into the collecting vial containing 10 mL saline. Among the 6 cartridges, only tC18 environmental cartridge could remove impurities and byproducts from $[^{11}C]PIB$ completely and showed higher specific activity than traditional HPLC purification method. This method took only 8 ~ 9 min from methylation to formulation. For the tC18 environmental cartridge and conventional HPLC loop methods, the radiochemical yields were $12.3{\pm}2.2%$ and $13.9{\pm}4.4%$, respectively, and the molar activities were $420.6{\pm}20.4GBq/{\mu}mol$ (n=3) and $78.7{\pm}39.7GBq/{\mu}mol$ (n=41), respectively. We successfully developed a facile on-cartridge methylation method for $[^{11}C]PIB$ synthesis which enabled the procedure more simple and rapid, and showed higher molar radio-activity than HPLC purification method.

• Korean Journal of Bronchoesophagology
• /
• v.13 no.2
• /
• pp.50-56
• /
• 2007

Background and Objectives: Laryngotracheal stenosis and its reconstruction in children is a highly challenging field to airway surgeons, and the way of stenting after a reconstructive surgery is still controversial. The aims of this study were to analyze the single institutional experiences of laryngotracheal reconstruction (LTR) in the pediatric patients with laryngotracheal stenosis and to compare the outcomes of single-stage LTR (SSLTR) with conventional two-stage LTR (TSLTR) in these patients. Materials and Methods: Medical records of 14 children (mean age 4.1 years) were reviewed, who received 20 LTR including 6 revisions for their moderate to severe subglottic stenosis and/or combined posterior glottic stenosis. Of these 20 LTR, tracheostoma was temporarily maintained after LTR in 12 cases (TSLTR) or not in the other 8 cases (SSLTR). Results: Overall decannulation rate of LTR that were performed before and after the year of 2003 was 40% (4/10) and 70% (7/10) respectively. Decannulation rate was 42% (5/12) in TSLTR group and 75% (6/8) in SSLTR group (P = 0.197). Mean interval to decannulation after LTR was 9.8 months and 7.2 days in TSLTR and SSLTR groups respectively (P = 0.004). A number of additional touch-up procedures that were required after LTR was 4 in TSLTR and 2.7 in SSLTR group (P = 0.238). Major complication rate was similar in both groups (33% in TSLTR and 38% in SSLTR, P = 0.910). Conclusion: A laryngotracheal reconstruction in children is a technically demanding procedure and its outcome is largely dependent on the surgeon's experience. Albeit there was a tendency that SSLTR ofters a higher decannulation rate, less additional touch-up procedures and similar complication rates, a shorter interval to decannulation after LTR was the only advantage that was confirmed as statistically significant in this study.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.25-32
• /
• 2012

The current VE activity is recognizing the VE object selection in job-plan simply as formal procedure. Therefore, many problems are happening in the process of selecting VE object during the preparatory stage. As a result of trying to analysis problems through literature review and expert interview, the problems were surveyed such as the lack of connectivity between preparatory stage and analytical stage, the temporal cost-based restrictions, and lack of recognition in VE team members in the existing method of selecting subjects centering on the high-cost field. Accordingly, this study suggested the improved method of selecting VE objects in order to solve this problem in the stage of selecting VE objects. An improvement method of selecting VE objects is what selects the secondary VE subjects by applying again Fish-Bone diagram and Worth technique based on the primary VE objects, which were selected by the conventional technique of selecting objects in the high-cost field. To verify effectiveness in the proposed improvement method, it tried to apply it to the actual case of the road construction VE project. As result of, the improvement method was analyzed to be considerably effective in comparison with the existing selection method of VE objects. Therefore, the Improvement method will contribute to increasing the VE performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.8
• /
• pp.15-26
• /
• 2011

In this paper, we present a new beamforming scheme for a downlink of multiuser multiple-input multipleoutput (MIMO) communication systems. Recently, a block-diagonalization (BD) algorithm has been proposed for the multiuser MIMO downlink where both a base station and each user have multiple antennas. However, the BD algorithm is not efficient when the number of supported streams per user is smaller than that of receive antennas. Since the BD method utilizes the space based on the channel matrix without considering the receive combining, the degree of freedom for beamforming cannot be fully exploited at the transmitter. In this paper, we optimize the receive beamforming vector under a zero forcing (ZF) constraint, where all inter-user interference is driven to zero. We propose an efficient algorithm to find the optimum receive vector by an iterative procedure. The proposed algorithm requires two phase values feedforward information for the receive combining vector. Also, we present another algorithm which needs only one phase value by using a decomposition of the complex general unitary matrix. Simulation results show that the proposed beamforming scheme outperforms the conventional BD algorithm in terms of error probability and obtains the diversity enhancement by utilizing the degree of freedom at the base station.