• 복식문화연구
• /
• 제18권3호
• /
• pp.397-407
• /
• 2010

This study is about the strife patterns in modern fashion and the characteristics inherent in them. The study was aimed at offering the basic materials to develop the creative design that can show various visual expression effects. In terms of method, the study was led by the analysis of documents; domestic and foreign fashion, collection magazines etc were used to analyze the strife patterns in modern fashion. According to the findings, the study used the rearrangement of the strife patterns at the same intervals, the arrangement of different strife patterns within one single item, the hybrid arrangement of strife patterns and different patterns, and the use of strife patterns for a certain part of clothing for the purse of emphasis or decoration. First, the characteristics inherent in such strife patterns showed clear simplicity using the same repetition of simple lines or the two colors of black and white. Second, strife patterns changed silhouettes by causing optical illusion, and showed the rhythm effects, such as swelling, wave or movement by distorting and controlling lines or forms. Third, based on irregular intervals or multi-strife, the concept of unclear disharmony and inconsistency was shown with the beauty of hybridharmony by blending various strife patterns with each other, or strife patterns with different patterns, and thus expressing composite images.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.313-318
• /
• 2006

An automatic sample centering system is underway at the protein crystallography beam line of the Pohang Light Source to improve the efficiency of the crystal screening process. A sample pin which contains a protein crystal is mounted on a goniometer head. Then the crystal should be moved to the center of X-ray beam by controlling the motorized goniometer to obtain diffraction data. Since the X-ray beam is located at the center of the image obtained from the CCD camera when the image of the sample pin is in focus, an auto-focusing algorithm is a very important part in the auto-sample-centering system. However the results of applying several well-known auto focusing algorithms directly to the images are not satisfactory owing to the following factors: misalignment of CCD camera, non-uniform cryo-stream in the background of the image and the supporter of the loop. The performance of an auto-focusing algorithm can be increased if the algorithm is applied to only the loop region identified. Non-uniform cryo-stream and a various illumination condition and a stain, which is shown in the image, are main obstacles to loop region identification. In this paper, a simple loop region identification algorithm, which can solve these problems, is proposed and the effective ness of the proposed scheme is shown by applying the auto-focusing algorithm to the loop region identified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.6-8
• /
• 2005

Study that uses geometrical information in computer vision is lively. Problem that should be preceded is matching problem before studying. Feature point should be extracted for well matching. There are a lot of methods that extract feature point from former days are studied. Because problem does not exist algorithm that is applied for all images, it is a hot water. Specially, it is not easy to find feature point in endoscope image. The big problem can not decide easily a point that is predicted feature point as can know even if see endoscope image as eyes. Also, accuracy of matching problem can be decided after number of feature points is enough and also distributed on whole image. In this paper studied algorithm that can apply to endoscope image. SIFT method displayed excellent performance when compared with alternative way (Affine invariant point detector etc.) in general image but SIFT parameter that used in general image can't apply to endoscope image. The gual of this paper is abstraction of feature point on endoscope image that controlled by contrast threshold and curvature threshold among the parameters for applying SIFT method on endoscope image. Studied about method that feature points can have good distribution and control number of feature point than traditional alternative way by controlling the parameters on experiment result.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.853-858
• /
• 2001

The knowledge of flame structure is essential for control of combustion instability phenomena. Some results of an experimental study on mechanism of naturally occurring combustion oscillations with a single dominant frequency are presented. Tests were conducted in a laboratory-scale dump combustor at atmospheric pressure. Sound level meter was used to track the pressure wave inside the combustor. The observed instability was a longitudinal mode with a frequency of $\sim341.8Hz$. Instability map was obtained at the condition of inlet temperature of $360^{\circ}C$, mean velocities of $8.5\sim10.8m/s$ and well premixed mixture. It showed that combustion instability was susceptible to occur in the lean conditions. In this study, unstable flame was observed from stoichiometric to 0.7 in overall equivalence ratio. At selected unstable conditions, phase-resolved OH chemiluminescence images were captured to investigate flame structure with various mean velocities. As mean velocity is increased, the flame grows and global heat release was changed. Due to these effects, combustion instability can be maintained at more lean air-fuel ratio. Also, these results give an insight to the controlling mechanism for an increasing heat release at maximum pressure.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.379-384
• /
• 2010

In the present work, bismuth nanopowders with various particle size distributions were synthesized by controlling argon (Ar) gas flow rate and chamber pressure of a gas condensation (GC) apparatus. From the analyses of transmission electron microscopy (TEM) images and nitrogen gas adsorption results, it was found that as Ar gas flow rate increased, the specific surface area of bismuth increased and the average particles size decreased. On the other hand, as the chamber pressure increased, the specific surface area of bismuth decreased and the average particles size increased. The optimum gas flow rate and chamber pressure for the maximized electrochemical active surface area were determined to be 8 L/min and 50 torr, respectively. The bismuth nanopowders synthesized at the above condition exhibit 13.47 $m^2g^{-1}$ of specific surface area and 45.6 nm of average particles diameter.

• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.27-37
• /
• 1993

본 연구에서는 공구의 파손 및 마멸량을 검출할 수 있는 시스템을 구축하고자 하였다. CCD(charge coupled device)카메라를 통해 공구형상의 영상을 얻고 이를 PC 로 분석하는 영상처리 기법과, 여기서 계산된 정보를 이용하여 패턴인식 기법으로 공 구의 상태를 판정하는 알고리즘을 개발하였다.

• 한국분무공학회지
• /
• 제12권3호
• /
• pp.160-165
• /
• 2007

In this study, the breakup characteristics of mono disperse droplets were studied with various fuels, ethanol, diesel fuel, biodiesel fuel extracted from soybean oil, and pure water. In order to investigate the droplet behavior in air cross-flow conditions, the experimental equipment was composed of a droplet generator with an air nozzle, and a high-magnification photo detecting system. Droplets produced by the droplet generator were injected into the air stream flowing normal to a direction of liquid drop jet. Digital images of the droplet behavior in air flow field were recorded by controlling the air flow rate. From the inspections, droplet breakup mechanism is primarily classified into the two kinds of stage, first breakup stage and second breakup stage. At the first breakup stage, droplet deformation rate seems to be affected by the force induced by the surface tension and the viscosity. On the other hand, at the second breakup stage, droplet is broken up mainly induced by the surface tension, so the breakup transition can be divided by the regular Weber number.

• 한국분무공학회지
• /
• 제17권3호
• /
• pp.128-133
• /
• 2012

The present study aims to examine the influence of flame spray distance on the thermal behavior of micro-metal particles and the morphological characteristics of $Ni_{20}Cr$ layers coated on the preheated SCM415 substrates by using the conventional flame spray system. Commercially available nickel-based $Ni_{20}Cr$ particles with a mean diameter of $45{\mu}m$ were used. In addition, CFD simulations using a commercial code (FLUENT ver. 6.3.26) were conducted to estimate temperature and velocity distributions of the continuous and discrete phases before impact on the substrate. From FE-SEM images of coated layers on the substrates, it was observed that as the spray distance decreased, the metal particle morphology showed splash-like patterns and such a short stretch shape, resulting from higher particle momentums and the impact of partially melted particles. Moreover, it was found that the spray distance should be considered as one of important parameters in controlling the porosity and the adhesion strength.

• 한국생산제조학회지
• /
• 제25권4호
• /
• pp.258-265
• /
• 2016

Digital printing has been used in various industrial areas, including semiconductor manufacturing and textile printing. However, implications on ceramic textile have not been well established so far. Printing high-viscosity materials requires an understanding of their behavior. An inorganic high viscous material with a viscosity range of 20-30 cps is analyzed using a viscometer and through X-ray diffraction. In this study, a digital printer is designed and assembled using a high-viscosity material with software for PC control, resulting in reduced processing at a fast area velocity of $20m^2/hr$. The present study demonstrated that the printer is capable of controlling the shape of the drop mass to smear ink smoothly onto the ceramic surface under an economic budget. In addition, to avoid any difficulty in color management, the ceramic printer is equipped with an independent color management system designed to cope with images on a highly viscous material.

• 한국광학회지
• /
• 제18권2호
• /
• pp.117-121
• /
• 2007

In-line 디지털 홀로그래피가 가지고 있는 가장 근본적인 단점은 실상과 허상 그리고 영차 회절광이 공간적으로 분리 되지 않는 것이다. 본 연구에서는 영차 회절광은 소프트웨어를 이용하여 제거하고, 실상과 허상의 구분은 in-line 홀로그래피 현미경의 기하학적 배치를 이용하여 구분하였다. in-line 홀로그래피 현미경에서 허상의 크기는 대물렌즈와 홀로그램간의 거리에 의존한다. 본 연구에서는 허상의 크기가 대물렌즈의 후방 초점거리와 대물렌즈와 홀로그램 면까지의 거리가 일치할 때 최소가 되는 것을 알았으며, 이를 이용하여 실상과 허상을 구분하였다.