• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.410-415
• /
• 2001

This paper proposes a new control scheme for the power factor improvement of DC power regenerating systems, which can regenerate the excessive DC power from DC bus line to AC supply in substations for traction systems. From the viewpoint of both power capacity and switching losses, the system is designed on the basis of three-phase square-wave inverters and composed of two inverters, zig-zag connected output transformers, and an AC filter. The output voltages of the regenerating system are not sinusoidal. However, regenerated complex power is analyzed on the basis of fundamental components and thus the reactive power produced by harmonics is not considered. Therefore, it is needed a new control scheme capable of controlling the reactive power nearly to zero even for nonsinusoidal cases. To verify the validity of the proposed control scheme, computer simulations are carried out. And the results show that the power factor is theoretically higher than 0.99.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.109-117
• /
• 2021

This study investigates the effects of FDI and other macroeconomic variables on Total Factor Productivity (TFP) in selected ASEAN+3 countries from 1981 till 2016. Total Factor Productivity (TFP) for each ASEAN+3 country was constructed using the Malmquist productivity index method. Then, a panel ARDL framework (dynamic heterogeneous panel), namely Pooled Mean Group (PMG), Mean Group (MG), and Dynamic Fixed Effect (DFE) are employed in examining the effects of FDI and other controlling variables on TFP. The new findings show that FDI has a significant and positive impact on TFP in the long run and the short run in ASEAN+3 countries. Besides, the results also reveal that in the long run, other variables such as the average number of years of schooling and the ratio of high-skilled to low-skilled labor also have a significant and positive effect on TFP. However, economic openness, government expenditure on R&D, and interaction between countries and FDI have a negative and significant impact on TFP. These findings implied that the recipient countries must ensure their political stability and offer various incentives to attract more investors. Furthermore, the influx of foreign investors, especially large ones and lower costs, should be encouraged by each country as FDI inflows can boost their TFP growth.

• Journal of People, Plants, and Environment
• /
• v.24 no.2
• /
• pp.195-207
• /
• 2021

Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO₂, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.213-217
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain, phase margin and maximum magnitude of sensitivity function, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.2019-2024
• /
• 2010

Insulin-like growth factor binding protein 5 (IGFBP-5) plays an important role in controlling cell survival, differentiation and apoptosis. Apoptosis can be induced by an extrinsic pathway involving the ligand-mediated activation of death receptors such as tumor necrosis factor receptor 1 (TNFR1). To determine whether IGFBP-5 and TNFR1 interact as members of the same apoptosis pathway, recombinant IGFBP-5 and TNFR1 were isolated. The expression and purification of the full-length TNFR1 and truncated IGFBP-5 proteins were successfully performed in E. coli. The binding of both IGFBP-5 and TNFR1 proteins was detected by surface plasmon resonance spectroscopy (BIAcore), fluorescence measurement, electron microscopy, and size-exclusion column (SEC) chromatography. IGFBP-5 indeed binds to TNFR1 with an apparent $K_D$ of 9 nM. After measuring the fluorescence emission spectra of purified IGFBP-5 and TNFR1, it was found that the tight interaction of these proteins is accompanied by significant conformational changes of one or both. These results indicate that IGFBP-5 acts potently as a novel ligand for TNFR1.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.424-429
• /
• 2003

A reciprocating compressor with a rotary motor used in a refrigerator has low efficiency, because it has the large mechanical losses due to the crank mechanism. The linear compressor which has the free piston driven by a linear motor, was developed to increase the efficiency of compressor by reducing mechanical losses. The TRIAC has been widely used for controlling the piston, because it has simple structure. However, as it is able to control only stator voltage, it is very difficult to obtain good efficiency. Recently, PWM inverter which is able to control the voltage as well as the frequency, is applied to linear compressor drive system to overcome above problem. In this paper, the variations for efficiency and power factor of linear compressor are investigated by changing both the mechanical resonant frequency and electrical resonant frequency of linear compressor, and also the inverter frequency The optimum relationships between both resonant frequencies and the inverter frequency is derived in order to obtain the maximum efficiency and also good power factor.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.23-26
• /
• 2004

Recently, most of countries in the world are investing huge amount of capital for the infrastructure of logistics and trying to gain dominating position in logistics. To play the role of important hub in logistics, an efficient, flexible, and fault-tolerant transportation process should be developed. Minimization of transportation cost and timely deliveries in the unpredictable environment are a few of the important issues in logistics. This study suggests a way of transporting goods to destinations at the minimal cost and with the minimal delay by optimally allocating transporting resources. Various attributes in transportation such as due date, priority etc. are also considered. Appropriate transporting resources for each work item is selected by calculating the weighted sum of the cost factor and the delay factor assuming that initial sequences of work items are given. A policy to reallocate transporting resources is also suggested when work items or transporting resources are added or deleted because of accidents or disturbances. This policy provides adaptability to the allocation methodology which enables the system to cope with changing environment by controlling various attributes in transportation. Genetic algorithm is used for this approach.

• Research in Community and Public Health Nursing
• /
• v.24 no.2
• /
• pp.225-235
• /
• 2013

Purpose: The purpose of this study is to identify the prevalence of the metabolic syndrome (MS) and factors associated with it among elders in a rural community. Methods: Data were collected from 683 subjects with a questionnaire, physical measurement, and blood test. The prevalence of the MS was determined by AHA/NHLBI and waist circumference cutoff points for Koreans. Results: The prevalence of the MS was 50.5% in total (41.6% in men, 56.3% in women) while the prevalence of 5 metabolic risk factors was 67.7% for elevated blood pressure, 51.0% for low HDL-cholesterol, and 50.2% for abdominal obesity. Risk factors associated with the prevalence of the MS included family history, BMI, and physical activity; significant factors associated with that of metabolic components included family history, BMI, smoking, drinking, and physical activity. Especially, a higher BMI was a strong risk factor of the prevalence of abdominal obesity as well as the MS and its components. Conclusion: The findings indicate that nurses should care for elders based on each metabolic component regarding its prevalence level and concentrate primarily on reducing elevated blood pressure, low HDL-cholesterol by controlling the main risk factor, abdominal obesity through lifestyle modification.

• Journal of Environmental Policy
• /
• v.2 no.2
• /
• pp.65-79
• /
• 2003

More than 145 million tons of liquid whey is produced world-wide as dairy processing waste per year, and half of it is discarded without proper treatment. Due to its high nutrient value, the environmental impact can be significant. Bioconversion of cheese whey can provide an effective way to reduce the waste and, at the same time, generate economically attractive value-added chemicals. In this study, cheese whey was fermented with P. acidipropionici to produce propionic acid which has a high market value for chemical and pharmaceutical industries. In order to specifically enhance propionic acid production, acetic acid production was suppressed using o-iodosobenzoic acid as an enzyme inhibitor. When grown in the presence of the inhibitor, propionic acid production rate increased by a factor of 2 while acetic acid production rate decreased by a factor of 3. Furthermore, when 0.3 mM of o-iodosobenzoic acid was used, the incipient stage(creeping growth period) was considerably reduced. Therefore, the inhibitor helps the cells begin to grow earlier and speed up the production of propionic acid. Although the production rate of propionic acid effectively increased, the final concentration(or production yield) remained unchanged due to product inhibition. Methods that can reduce product inhibition are being tested combined with o-iodosobenzoic acid to optimize both the production rate and yield. The results are expected to be informative for controlling the other byproducts for other applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.497-497
• /
• 2013

Semiconducting amorphous InGaZnO (a-IGZO) has attracted significant research attention as improved deposition techniques have made it possible to make high-quality a-IGZO thin films. IGZO thin films have several advantages over thin film transistors (TFTs) based on other semiconducting channel layers.The electron mobility in IGZO devices is relatively high, exceeding amorphous Si (a-Si) by a factor of 10 and most organic devices by a factor of $10^2$. Moreover, in contrast to other amorphous semiconductors, highly conducting degenerate states can be obtained with IGZO through doping, yet such a state cannot be produced with a-Si. IGZO thin films are capable of mobilities greaterthan 10 $cm^2$/Vs (higher than a-Si:H), and are transparent at visible wavelengths. For oxide semiconductors, carrier concentrations can be controlled through oxygen vacancy concentration. Hence, adjusting the oxygen partial pressure during deposition and post-deposition processing provides an effective method of controlling oxygen concentration. In this study, we deposited IGZO thinfilms at optimized conditions and then analyzed the film's electrical properties, surface morphology, and crystal structure. Then, we explored how to generate IGZO thin films using DC magnetron sputtering. We also describe the construction and characteristics of a bottom-gate-type TFT, including the output and transfer curves and bias stress instability mechanism.