• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1850-1851
• /
• 2006

The sliding mode control is acceptable for Autonomous Underwater Vehicle(AUV), since the dynamics of AUV are highly nonlinear and have several parameter uncertainty such as the added mass terms, the hydrodynamic coefficients. The sliding mode control can deal well with nonlinearity of the system and offers a robustness to controller with parameter uncertainty. Since sliding mode control has the defect of chattering problem, only in ideal case the actuator can respond by control law. Therefore we propose the sliding mode control with non-chattering. And computer simulations illustrate the performance of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.348-350
• /
• 2006

In this paper, we design a new controller for an ultra-precision positioning system. In general, time optimal control enables to reach a target position faster than others. However it shows a weakness to chattering effect. In order to solve the problem, a new control algorithm based on sliding mode control is proposed. The suggested controller is composed of LQR control and sliding mode control. By performing some simulations, we prove that the proposed controller is more robust than time optimal control under the circumstance of parameter uncertainties and external disturbances.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.30-32
• /
• 2005

Mobility of an indoor wheeled robot is affected by adhesion force that is related to various floor conditions. When the adhesion force between driving wheels and floor decreases suddenly, the robot begins slip. In order to overcome this slip problem, optimal slip velocity must be decided for stable movement of wheeled robot. First of all, this paper shows that conventional PI control can not be applied to a wheeled robot of the light weight. Secondly, proposed fuzzy logic is applied to the Takagi-Sugeno model for the configuration of fuzzy sets. For the design of Takagi-Sugeno model and fuzzy rule, proposed algorithm uses FCM(Fuzzy c-mean clustering method) algorithm. The proposed fuzzy logic controller(FLC) is pretty useful with prevention of the slip phenomena for the controller performance in the re-adhesion control strategy.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.422-428
• /
• 2007

This paper presents a neural network based adaptive control approach to a reconfigurable flight control law that keeps handling qualities in the presence of faults or failures to the control surfaces of an aircraft. This approach removes the need for system identification for control reallocation after a failure and the need for an accurate aerodynamic database for flight control design, thereby reducing the cost and time required to develope a reconfigurable flight controller. Neural networks address the problem caused by uncertainties in modeling an aircraft and pseudo control hedging deals with the nonlinearity in actuators and the reconfiguration of a flight controller. The effect of the reconfigurable flight control law is illustrated in results of a nonlinear simulation of an unmanned aerial vehicle Durumi-II.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.3
• /
• pp.73-82
• /
• 1995

The paper demonstrates that an adaptive fuzzy controller can be used effectively for the control of the temperature and density of the Tokarnak fusion recator which is nonlinear and has dynamic uncertainties. The dynamic uncertainties are non-parametric but state dependent. Thus the conventional adaptive nonlinear control methods have difficulties to cope with the problem. The proposed adaptive fuzzy controller can be used as a solution and performs well in a predetermined local space. Simulation result verifies the effectiveness of the scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.111.5-111
• /
• 2001

This paper places great importance on performance improvement of Galvanometer system used for laser display, laser processing, marking system. Fundamentally, we implement control system, on that assumption that laser source exists, and design basic PID controller. Hardware is composed of DSP(TMS320C32) chip, and the position compensation of Galvanometer is performed by using 16-bit A/D and D/A converter. Through frequency response analysis and simulation, the attribute of plant and controller is captured and then, total system is analyzed. We deliberate noise problem that can be caused from analog signal as driving signal for Galvanometer.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.77-84
• /
• 2013

The proportional pressure control valve that was used to relief valve has different dynamic characteristics on each case. Because this valve has different assembling or processing error and environmental condition. However, a customer who used the relief valve wants to have a steadily performance even if the dynamic characteristics of valve was changed. For this reason, the manufacturer try to make the robust controller that has simple structure. This paper concerns about the design of robust controller that didn't affected by plant parameter's changing. The control strategy is a model reference control that conducted by on line identification problem, gradient method and Lyapunov equation. This adaptvie control law's validity that this paper deal with was confirmed by an results of step response test or hysteresis test.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1034-1039
• /
• 1992

Time Delay Controller(TDC) is a model following controller which uses input and output values and state variables to estimate additional quantity of dynamics due to external disturbances and/or model parameters variation at some past instant. TDC is very robust against parametric uncertainty whil it is not robust against unmodeled dynamics even showing instability. To solve this problem a stability anlysis is performed and a compensation technique using reduced order observer, Anti-Filtering Compensator(AFC), is proposed for a case in which the high order kinown dynamics is deliberately ignored. If the ignored dynamics causes instability of the TDC control system, AFC is shown to be indispensible fot a stable implementation of TDC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.79-82
• /
• 1995

The problem of temperature control for rapid thermal processing (RTP) in semiconductor manufacturing is discussed in this paper. Among sub=micron technologies for VLSI devices, reducing the junction depth of doped region is of great importance. This paper investigates existing methods for manufacturing wafers, focusing on the RPT which is considered to be good for formation of shallow junctions and performs the wafer fabrication operation in a single chamber of annealing, oxidation, chemical vapor deposition, etc., within a few minutes. In RTP for semiconductor manufacturing, accurate and uniform control of the wafer temperature is essential. In this paper, a robustr controller is designed using a recently developed optimization technique. The controller designed is then tested via computer simulation and compared with the other results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.508-512
• /
• 2016

This paper discusses a Takagi-Sugeno (T-S) fuzzy controller design problem for a phugoid model-based multi-agent system. The error between the state of a phugoid model and a reference is defined to construct a multi-agent system model. A T-S fuzzy model of the multi-agent system is built by introducing a nonlinear controller. A fuzzy controller is then designed to stabilize the T-S fuzzy model, where the synthesis condition is represented in terms of linear matrix inequalities.