• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1392-1401
• /
• 2015

Inverter configurations for multiple-load induction cooking applications need development. Inverter configurations for induction cooking applications are used in home appliances based on single coil inverters. For multiple-load configurations, multiple coils are used. They require proper inverters, which provide independent control for each load and have fewer components. This paper presents a three-leg inverter configuration for three load induction cooking applications. Each induction coil powers one induction cooking load. This configuration operates with constant switching frequency and powers individual loads. The output power of the required load is controlled with a phase-shift control technique. This configuration is simulated and experimentally tested with three induction loads. The simulation and experimental results are in good agreement. This configuration can be extended to more loads.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.44-45
• /
• 2011

Research on photovoltaic (PV) generation is taking a lot of attention due to its infinity and environment-friendliness with decrease of price per PV cell. While central inverters connect group of PV modules to utility grid in which maximum power point tracking (MPPT) for each module is difficult, micro inverter is attached on each module so that MPPT for individual modules can be easily achieved. Moreover, energy generation and consumption efficiency can be much improved by employing direct current (DC) distribution system. In this paper, a digitally controlled PV micro converter interfacing PV to DC distribution system is proposed. Boundary conduction mode (BCM) is utilized to achieve zero voltage switching (ZVS) of active switch and eliminate reverse recovery problem of passive switch. A 120W prototype boost PV micro converter is implemented to verify the feasibility and experimental results show higher than 98% efficiency at peak power and 97.29% of European efficiency.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.144-147
• /
• 1991

For the control of induction motor, there are many methods which guarantee robustness. Especially, this paper proposes vector control strategy and sliding mode control method which has insensitivity to disturbances and parameter variations. Furthermore, by construction of a new switching function the controlled variable structure system can remove reaching phase deteriorating robustness at the transient state of the conventional sliding mode algorithm. The usefulness of the proposed control algorithm is verified by the simulations and experiments.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.319-322
• /
• 1990

Self-controlled permanent magnet synchronous motor (PMSM) has similar operating characteristics as seperately excited dc motor. It is favored in servo applications due to its improvement of efficiency and maintenance. This paper presents completely digitalized controller using microprocessor and voltage fed inverter. The speed control system for PMSM is implemented. To control the motor speed, the control system regulates the magnitude of Inverter output voltage by regular-sampled PWM method to generate sinusoidal PWM wave with microprocessor. And to keep the range of inverter switching frequency, it varies the number of pulse train according to the speed.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.309-313
• /
• 1990

Pulse width modulation using discontinuous conduction modes are applied to a full-bridge series resonant converter to regulate the output from no load to full load with low switching loss and a narrow range of frequency variation. Finally, a simple nonlinear discrete-time dynamic model for this proposed converter is derived using approximation. This discrete time model is linearized and a general input - output transfer function for the propelled converter is derived.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.571-576
• /
• 2002

This paper is to develop jumping ring system with three sensor arrays and to control levitated ring using dynamic neural mode. Placing an aluminum ring on the core and switching on an AC source causes the ring to jump in the air due to induced currents. The educational system is composed of 40th optical sensor array, encode circuit, 89C51 microprocessor and control board. The control board consists of power IC, and phase controller. Real time process is present to obtain a height of levitated ring for three different sensor arrays. Based on the educational system and the proposed dynamic neural mode, the height of levitation of the ring is controlled by reference signals. This paper focuses on real system controls using the dynamic neural mode with on line learning algorithm.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2058-2061
• /
• 1997

A main research topic in PWM inverter drive system is to reduce the generated acoustic noise. One method to reduce the acoustic noise is to cause the switching pattern to be random. This RPWM(Random Pulse Width Modulation) technique for voltage controlled inverters is a kind of good solutions for reduction of acoustic noise and suppression of vibration. This paper describes a carrier frequency modulated real-time RPWM inverter. Changing the carrier frequency randomly, the power spectrum of tile acoustic noise was spread over the wide-band area. And experimental results showed that emitted noise is much more comportable and less annoying

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2104-2106
• /
• 1997

In order to develop the three phase GTO CSI with double recovery path of commutation energy by passive devices (LCD), we studied the clamping circuit to protect switching device and energy recovery circuit to recover absorbed energy of capacitor and DC inductor. In this paper, we investigated how DC input power is increased or decreased according to energy recovery path with or not in the three phase GTO current source inverter, we used a induction motor as inverter load, and controlled a induction motor with v/f constant control. Experimental results show that dissipated DC power is decreased in $9{\sim}14%$ by double recovery path. We also confirmed that the characteristics is met as compare simulation results with experimental results according to each frequency.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.495-497
• /
• 1996

This paper proposes LCC type high frequency resonant inverter to be used as a source of induction heating device or ultrasonic device and considers of operating characteristic for it. The inverter is operated safely over wide range load, because it has both panel loaded capacitor and series loaded capacitor. Then, switching frequency of the inverter is controlled by feedback voltage and current in order to have constant output power even when load is varied.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.324-327
• /
• 1996

This paper presents the adoption of PWM converter to enhance input power factor in inverter arc welder. By using PWM converter in inverter arc welder, the disadvantages of bridge diode converter such as low input power factor is improved, new NCT(Noise Cut Transformer) is designed to reduce noise which has harmful effect in switching component, half bridge PWM inverter is adopted to reduce cost in inverter arc welder.