• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.209-218
• /
• 1998

Ca-deficiency frequently observed in the hydroxyapatite powders prepared by precipitation which is known to be deleterious for its application to biomaterials was prevented by the technique developed in this study. In addition the prepared powder has been revealed to be quite active that full density is achieved at temperatures as low as 100$0^{\circ}C$ Instead of using N2 air was chosen as the processing atmosphere during the precipitation and aging of hydroxyapatite. {{{{ {CO }`_{3 } ^{2- } }} ions from the processing atmosphere(air) substitute partly for {{{{ {PO }`_{4 } ^{3- } }} ions in the hydroxyapatite and its content can be controlled by pH of the solution where the pre-cipitation reaction occurs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.852-856
• /
• 2009

Poly(ethyleneglycol methacrylate-co-benzyl methacrylate) (P(PEGMA-co-BMA)) microgel was prepared by precipitation copolymerization of PEGMA and benzyl methacrylate in poly(acrylic acid)/ethanol solution. The microgels with various sizes were obtained by changing the concentration of poly(acrylic acid), monomer and nature of solvents. The particle size of P(PECMA-co-BMA) microgels was decreased with increasing the concentration of poly(acrylic acid) and increased with that of monomer. By increasing solubility parameter of solvents, the particle size was inecreased. The size of P(PEGMA-co-BMA) microgels was controlled by experimental conditions from $0.1{\mu}m$ to $0.35{\mu}m$.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.257-263
• /
• 1995

Fractional precipitation of "native" dextran by the method of nonsolvent addition was studied. Precipitational phenomenon of fractioned dextran was characterized with the quantitative determination of the precipitational capacity of nonsolvents with different dielectric constants. Based upon this characterization, the fractional precipitation process for the dextran production was developed. From the precipitational characteristics, a first-order relationship between the molecular weight of fractioned dextran and the content of nonsolvents was formulated. The slopes of the first-order equation were correlated with the dielectric constants of the nonslovents. A modified fractionation process was constructed on the basis of refractionation method and employed to increase the efficiency of the controlled production of dextran.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.1
• /
• pp.10-15
• /
• 2003

In Nb, V and Ti added steels, carbo-nitrides are formed due to their strong interaction with C and N. The formation of carbo-nitrides has an important role to control the microstructure as well as mechanical properties by grain size refinement and precipitation hardening. However, the quantitative analysis of distribution of precipitates and the effect of precipitates on the phase transformation and mechanical properties are still far from satisfactory. In this study, the quantitative analysis of precipitates in austenite was investigated using the fact that the formation of precipitates in Nb, V and Ti added steels accelerates austenite/ferrite transformation. The formation of precipitates was controlled by adjusting holding temperature and time in austenite region, transformed Volume fractions were measured by dilatometer during slow cooling, Iso-precipitation kinetics were determined by comparing 5% and 50% volumes transformed at various conditions respectively. The result was compared with the calculated.

• Journal of Powder Materials
• /
• v.15 no.6
• /
• pp.450-457
• /
• 2008

The objectives of this study were the development of a synthesis technique for highly active nanosized ITO powder and the understanding of the reaction mechanisms of the ITO precursors. The precipitation and agglomeration phenomena in ITO and $In_{2}O_{3}$ precursors are very sensitive to reaction temperature, pH, and coexisting ion species. Excessive $Cl^-$ ion and $Sn^{+4}$ ions had a negative effect an synthesizing highly active powders. However, with a relevant stabilizing treatment the shape and size of ITO and $In_{2}O_{3}$ precursors could be controlled and high density sintered products of ITO were obtained. By applying the reprecipitation process (or stabilization technique), highly active ITO and $In_{2}O_{3}$ powders were synthesized. Sintering these powders at $1500^{\circ}C$ for 5 hours produced 97% dense ITO bodies.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.137-139
• /
• 2008

Floating zone, neutron transmutation-doped and magnetic Czochralski silicon crystals are being widely used for fabrication power devices. To improve the quality of these devices and to decrease their production cost, it is necessary to use large-diameter wafers with high and uniform resistivity. Recent developments in the crystal growth technology of Czochralski silicon have enable to produce Czochralski silicon wafers with sufficient resistivity and with well-controlled, suitable concentration of oxygen. In addition, using Czoehralski silicon for substrate materials may offer economical benefits, First, Czoehralski silicon wafers might be cheaper than standard floating zone silicon wafers, Second, Czoehralski wafers are available up to diameter of 300 mm. Thus, very large area devices could be manufactured, which would entail significant saving in the costs, In this work, the conventional Czochralski silicon crystals were grown with higher oxygen concentrations using high pure polysilicon crystals. The silicon wafers were annealed by several steps in order to obtain saturated oxygen precipitation. In those wafers high resistivity over $5,000{\Omega}$ cm is kept even after thermal donor formation annealing.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.290-293
• /
• 2000

After kaolin clay was compulsorily contaminated with Co$^{2+}$ion, the remediation characteristics by electrokinetic method were analyzed. Ethanoic buffer was injected in the soil column and $CH_3$COOH was continuously inputted in cathode reservoir to restrain the pH elevation. Since pH of the cathode side of the soil column was 4.0 at initial and was restrained by 6.5 at 43.6 hours, Precipitation, Co(OH)$_2$, was not formed in the column. Effluent rate increased with time passage and remediation in the column in initial time was mainly controlled by ion migration. 13.1% of total in the soil column was remediated in 10 hours, and the 6.8% of total in 20.8 hours, and the 71.7% of total in 43.6 hours, and the 94.6% of total in 43.6 hours. Meanwhile, the residual concentrations in the column calculated by the developed model were similar to those by experiment.t.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5299-5303
• /
• 2013

Poly(butyl methacrylate-co-polyethyleneglycol methacrylate) (Poly(BMA-co-PEGMA)) microsphere was prepared by precipitation copolymerization of PEGMA and butyl methacrylate in ethanol solution. Microspheres were controlled by experimantal conditions 140nm to 210nm. The particle size of Poly(BMA-co-PEGMA) microspheres was decreased with increasing the concentration of PEGMA and increased with BMA of monomer.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.52-61
• /
• 2017

Transient liquid phase (TLP) bonding is essential technology to repair micro-cracking on the airfoil of blades and vanes for gas turbines. Understanding of the characteristics of TLP bonding of the superalloys is necessary in the application of the technology for repairing these components. In this study, the focus was on investigating TLP bonding characteristics of ${\gamma}^{\prime}$ precipitation strengthened Ni based superalloy. TLP bonding was carried out with an amorphous filler metal in various bonding conditions, and the microstructural characterization was investigated through optical microscopy (OM) and electron probe micro-analysis (EPMA). The experimantal results explained clearly that bonding temperatures had critical effects on the TLP bonding behaviors, and that isothermal solidication of the joints made at higher temperatures than $1170^{\circ}C$ was controlled by Ti diffusion instead of B.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.147-156
• /
• 1989

The effects of starting composition, sintering temperature and porosity on the mechanical properties of hydroxyapatite ceramics were investigated. The hydroxyapatite powder were prepared by precipitation method using Ca(NO3)2.4H2O and (NH4)2.HPO4. The obtained powders were Ca-deficient hydroxyapatites and as the Ca/P mole ration in the initial solution was increased, the particle size of the precipitates was decreased, and the decomposition of hydroxyapatite to $\beta$-TCP was controlled. The porosity, as well as Ca/P mole ratio in starting composition and sintering temperature, plays major role in the mechanical properties of dense hydroxyapatite ceramics.