• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.411-414
• /
• 2000

음의 비선형 전파가 일어나기 쉬운 정도를 나타내는 파라메타로서 기본파 진폭과 제2고조파 진폭의 비로써 매질의 물리적 성질에만 관계하는 파라메타 B/A가 있다(1)(2). 종래 B/A파라메타 측정은 대부분 광대역의 초음파 트랜스듀서 혹은 공진 주파수가 다른 복수의 트랜스듀서를 이용하여 왔다(3). 본 연구에서는 협대역의 단일 트랜스듀서를 이용하여 B/A파라메타를 효율적으로 측정 할 수 있는 전용 초음파 트랜스듀서를 제안하였다. 그 방법으로 특성이 동일한 두 장의 압전체를 적층시키고, 그 중 한 장의 압전체에 전기적인 용량을 접속하여 기본 공진 모드 및 기본 공진 모드의 두 배의 주파수에 해당되는 조화파 모드를 발생시킬 수 있도록 하였다 이것을 시험 제작하여 그 특성을 이론 및 실험적으로 해석한 결과 음향 매질의 비선형 파라메타인 B/A의 측정에 적용 가능함을 확인하였다.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.214-220
• /
• 2019

Hearing impaired people are apt to be in danger because they can't detect danger with sound. Hearing impaired people have less risk-detection ability than non-disabled people because of lack of hearing. There are many devices to help the hearing impaired, such as hearing aids. A hearing aids can be helpful, but it may not be available depending on the degree or type of hearing loss for example, to the hearing-impaired people with little remaining hearing of high frequencies, ordinary hearing aids are not very useful for understanding the high frequency consonants and it requires a high cost, from thousands to tens of thousands of dollars. Also, it is difficult for the underprivileged, such as the low-income bracket and the elderly, to use them because they are difficult to manage. Therefore, this paper describes the development of low-cost wearable device to assistant a hearing-impaired people using Arduino. Also, it accepts values from switches or sensors and can control external electronic devices such as LEDs and motors to create objects that can interact with the environment. In this is paper, through sound sensors, the ambient sound was taken as an analogue value and transmitted to the aduino board, and the vibration motor was operated when the noise was generated, so that the user could be aware of the occurrence of danger.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.272.1-272.1
• /
• 2016

In a three-dimensional topological insulator Bi2Se3, a stress control for band gap manipulation was predicted but no systematic investigation has been performed yet due to the requirement of large external stress. We report herein on the strain-dependent results for Bi2Se3 films of various thicknesses that are grown via a self-organized ordering process. Using small angle X-ray scattering and Raman spectroscopy, the changes of d-spacings in the crystal structure and phonon vibration shifts resulted from stress are clearly observed when the film thickness is below ten quintuple layers. From the UV photoemission/inverse photoemission spectroscopy (UPS/IPES) results and ab initio calculations, significant changes of the Fermi level and band gap were observed. The deformed band structure also exhibits a Van Hove singularity at specific energies in the UV absorption experiment and ab initio calculations. Our results, including the synthesis of a strained ultrathin topological insulator, suggest a new direction for electronic and spintronic applications for the future.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.3
• /
• pp.99-106
• /
• 2016

The proposed hybrid damper installs at a coupling beam and consists of a high-damping rubber (HDR) and steel pin. The proposed hybrid damper adopted a pin-lock system acts as a viscoelastic damper under wind load (small displacement) while it behaves as a hysteretic damper under earthquake load (large displacement). In this paper, the pin-lock mechanism and structural performance of the proposed hybrid damper is evaluated through experiment. Experiments were carried out with the variables which displacement, loading frequency and steel pin quantities were used. Test results showed that the pin-lock mechanism and the performance of the hybrid damper under a large displacement were verified. Also equivalent damping ratios of HDR were increasing at a small displacement as displacement amplitudes were increasing. However HDR did not depend on frequency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.8
• /
• pp.2601-2610
• /
• 1996

Surface protrusions have been attached on a cylinder surface to reduce the flow-induced structural vibration by controlling the wake flow. Wind tunnel tests on the near wake of a circular cylinder with surface protrusions were carried out to investigate the flow characteristics of the controlled wake. Three experimental models were used in this experiment; one plain cylinder of diameter D and two cylinders wrapped helically by three small wires of diameter d=0.075D with pitches of 5D and 10D, respectively. Free stream velocity was ranged to have Reynolds number from 5000 to 50,000. Streamwise and vertical velocity components of the wake were measured by a hot-wire anemometry. The spanwise velocity component measured by a one-component fiber optic LDV revealed that time-averaged wake field has a nearly two-dimensional structure. It was found that the surface protrusions elongate the vortex formation region, which decrease the vortex shedding frequency. The suppression of vortices caused by the surface protrusions increases the velocity deficit in the center of wake region.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.1
• /
• pp.113-119
• /
• 2013

Spatial structures have the different dynamic characteristics from general rahmen structures. Therefore, it is necessary to accurately analyze dynamic characteristics and seismic response of spatial structure for seismic design of spatial structure. An arch structure is used as an example structure because it has primary characteristics of spatial structures. Multiple support excitation may be subjected to supports of a spatial structure because ground condition of spatial structures is different. In this study, the response analysis of the arch structure under multiple support excitation and simple support excitation is studied. By means of the pseudo excitation method, the seismic response is analyzed for long span spatial structure. It shows that the structural response is divided into two parts, ground displacement and structural dynamic response due to ground motion excitation. It is known that the seismic response of spatial structure under multiple support excitation and simple support excitation are the different in some case. Therefore, it has to be necessary to analyze the seismic response of spatial structure under multiple support excitation because the spatial structure supports may be different.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.221-230
• /
• 2004

In this paper, the dynamic response of a multi-story steel moment resisting frame equipped with viscoelastic dampers or lead rubber bearing type isolators subjected to seismic loads is investigated analytically. The objective of this study is to find the best location of viscoelastic dampers by the maximum stress method and maximum story drifts method from structure analysis. Also, a secondary objective of the study is to compare the member force, combined stress, and natural period of the structure retrofitted with viscoelastic dampers or lead rubber bearing type isolators to find effective vibration control method.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.4
• /
• pp.41-48
• /
• 1985

자동차 태수의 급격한 증가 및 일상생활에 있어서의 자동차 사용할 때간 증대는 곧 개개인의 생 활공간에 대한 자동차의 점유비율이 높아가고 있음을 입증한다. 따라서 거주성, 안락감, 쾌적성 등 종합적 주거환경에 관한 고객의 요구 역시 높은 수준으로 만족되어야 한다. 그러나 연비, 생 산성향상 등 경제적 측면의 요구에 부합하기 위한 자량의 경량화, 소형화 추세는 위에서 언급된 차내 주거환경을 저해하는 여러 가지 난제를 안겨주고 있다. 특히 안락감, 쾌적성의 저해는 가 장 직접적으로 나타나는 문제이며, 이는 차체의 진동입력에 대한 감수성 증대와 진동전달계류의 단서화에 따른 절연능력의 저하에 기인하는 것으로 보인다. 더구나 이와같은 진동문제는 대부분 차내소음을 유발시키며 넓은 주파수범위(홍80-120Hz)에 걸쳐 이들 두가지가 서로 달성되는 경우 가 많기 때문에 대적성의 저해요인으로 가장 크게 주목되고 있다. 자동차 진동 소음의 저감을 위한 노력은 실험적, 이론적 해석방법의 진보에 힘입어 꾸준한 소모로 실현되고 있으며 발생기구, 전달계류, 응답계류을 통틀어 부분적 또는 종체적인 연구가 계속되고 있다. 이와같은 세가지 계류중 전달계류은 발생기구와 응답계류 각각의 특성에 대하여 상호보완적인 역할을 수행해야 하기 때문에 항시 까다로운 요구조건을 안락시키도록 연구되어야 한다. 본고에서는 진동 소음의 전달계류중 가장 중요한 위치를 차지하고 있는 방진고무의 기본적역할 및 이들의 동력학적 측 면에서의 응용원리에 대해 검토하고 최근 급변하는 신기술동향에 대해 소개하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1385-1389
• /
• 2005

This paper describes the design, analysis and manufacture procedure of the composite blade for hingeless rotor system of unmanned helicopters. Helicopter rotor system is the key structural unit that produces thrust and control forces for intended flight conditions. In this work, a hingeless rotor system is adopted, and base on the design requirements for rotor system, composite blade section design and calculation of material properties were performed. In order to avoid the unstable state such as resonance, vibration characteristics of rotor system were analyzed. Finally, this paper describes the forming and manufacture of composite blade.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1766-1769
• /
• 2005

Air-operated valve(AOV) is one of principal valves that are using to control fluid flow in nuclear power plants. AOV is suffered from damage and malfunction by the abrasion, corrosion and vibration of valve parts under the long time operation. This mechanical trouble and malfunction of valve is critical for the safety of power plant. So a periodic diagnosis for safety of power plants is inevitable to guarantee the safety of the power plant. But depending on the type of the actuator and valve body, various types of AOV exist. In this study, It is developed the diagnostic system that users of power plants are easy to handle in this paper.