• Steel and Composite Structures
• /
• v.27 no.4
• /
• pp.465-477
• /
• 2018

In this research, vibration and smart control analysis of a concrete foundation reinforced by $SiO_2$ nanoparticles and covered by piezoelectric layer on soil medium is investigated. The soil medium is simulated with spring constants and the Mori-Tanaka low is used for obtaining the material properties of nano-composite structure and considering agglomeration effects. With considering first order shear deformation theory, the total potential energy of system is calculated and by means of Hamilton's principle in three displacement directions and electric potential, the six coupled equilibrium equations are obtained. Also, based an analytical method, the frequency of system is calculated. The effects of applied voltage, volume percent and agglomeration of $SiO_2$ nanoparticles, soil medium and geometrical parameters of structure are shown on the frequency of system. Results show that with applying negative voltage, the frequency of structure is increased.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.115-118
• /
• 2000

본 연구에서는 소형 DC 모터 완성품의 제품검사에서 객관성이 결여된 판정기준인 작업자의 청각에 의한 관능검사에 대신하여 자동 진단 시스템의 적용으로 고신뢰성을 확보하기 위하여 음향신호를 취득하여 분석하는 방법을 제안하였다. 소형 모터가 회전할 때 발생하는 음향신호를 마이크로폰으로 취득하여, 취득한 신호에 단구간 Hanning Window를 걸어 시간에 따라 이동하면서 신호의 주파수 성분을 시간에 따라 전개하는 STFT(Short-Time Fourier Transform) 기법으로 정상적인 모터와 이상인 모터에서 발생하는 음향신호를 분석하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.127-130
• /
• 2000

소형 모터의 제품검사에 있어서 인간의 청각에 의한 소음 및 이음 검사가 널리 관능검사에 의존하고 있지만 이는 판정기준의 객관성이 결여된다. 그래서 이를 대신하여 모터가 회전할 때 발생하는 음향신호에 의해 모터의 이상 유무의 판정에 대하여 기술하였다. 본 연구에서는 인간의 청각에 의한 관능검사에 의존도가 높은 자동차용 소형 DC 모터를 대상으로 이상음 검출을 위해 단구간 FFT의 시간이동 평균을 이용하여 음향신호를 해석하고 각 대역에서 추출된 파워를 비교하여 정상과 이상 모터의 판별이 뚜렷한 최적의 대역을 선택하고 이를 패턴 화하여 소형 DC 모터 이상유무 실시간 자동진단 시스템에 적용 하고자 한다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2003

Generally, thrust force of double-sided LPM is more powerful than that of single-sided LPM. Also, double-sided LMP can be effectively applied to the high-precision position system with its simple control scheme. However, An equality between two airgap lengths Is a necessary condition for its high performance. If a little difference between two airgaps is existed, unbalanced normal force and undesirable vibration will be generated. Additionally, even though two airgap lengths are absolutely same, undesirable vibration can be generated because the direction of instantaneous normal force on mover is changed according to excitation methods. An effect of inequality of two airgap lengths is presented in this paper. Distribution of airgap permeance vs. relative displacement is analyzed by two dimensional finite element method. Excitation From this results, current waveforms to reduce the undesirable vibration is proposed.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.2
• /
• pp.109-114
• /
• 2003

This paper presents observations made on four-bundled conductor transmission lines concerning the behavior of conductors under the effect of natural winds. To know the wind-induced vibration status and how to control it, wind-induced vibrations have been recorded and analyzed from the real transmission lines. From the field observation and analysis results, subspan oscillation was found to be the main type of vibration. In addition, the data also revealed some common characteristics of the observation sites with high maintenance rates. The results will be used in controlling the subspan oscillations and protecting the conductors.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.1990-1995
• /
• 2010

Main reasons for causing vibration in a permanent magnet synchronous motor (PMSM) are torque ripple and radial force harmonics, and hence, both of them are undesirable in high-precision machine tools and accurate motion-control actuators. Recent research on radial force is the prediction of major vibration frequencies and modes in terms of motor design such as different winding types and a fractional slot number per pole in the stator. Also, proper phase current has been investigated for minimizing radial force harmonics. During the previous studies, all the motors are assumed to be ideally built up in terms of mechanical dimensions, but it is impossible due to dimensional variation within or outside tolerance in production. Therefore, in this paper, the effect of several key factors on radial force is examined and compared regarding manufacturing imperfection.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.45-50
• /
• 2014

In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member and suggested new possibility of the special seat with the auxiliary plastic member for movie theater chair. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of a mesh type plastic member and applied to the design of practical chair seat.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.600-604
• /
• 2013

A CTBA(Coupled Torsion Beam Axle) is a general type for rear suspension of small/compact sedans. It connects left and right knuckles using torsion beam axle and trails rear wheels. Therefore, a CTBA performs a main role of ride & handing. But, a CTBA suspension has main bending mode around 120Hz and causes road booming noise in the interior of a car. Therefore, the mode control of a CTBA is very important for reducing road noise. In this paper, we optimized the shape of a CTBA to reduce road noise considering R&H performance, simultaneously. The vibration mechanism of CTBA was investigated using ODS(Operational Deflection Shape) and mode shape.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.699-705
• /
• 2013

This paper presents vibration testing, control, and finite element analysis of a piping system, which is subjected to the changes in fluid levels. Nuclear power plants typically employ a cooling system that uses sea water. These systems are subjected to dynamic characteristic changes caused by sea-level variations, which introduces failures of cooling system components. Therefore in this study, analytical and experimental studies were performed to understand the effect of sea-level changes on the dynamic characteristics of piping systems. It was shown that, as the sea-level increases, pipe's natural frequencies decreases in relation to its mode shape. A 1/14 scale model was also built to compare the results obtained by the analytical study. A good agreement between experiment and analytical studies were observed. Finally, an on-line resonant frequency identification system was proposed and developed, which utilizes piezoelectric transducers as sensors and actuators, in order to avoid catastrophic failure of piping systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.28-38
• /
• 1986

An analytical and experimental investigation is made to the dynamic responese of a cantilever with a tip mass that models some of the basic phenomena involved in the response of a flexible manipulator with a tip mass on its free end under the given rotating motion. The system equation is derived from the Hamilton's principle on the basis of the Euler-Bernoulli hypothesis and an approximate solution is obtained from model analysis using Galerkin's method for the vibation response of the system subjected to a sudden stop after an impulsive rotation. Experiment was performed to verify the validity of the theoretical analysis. Results are given for the vibration amplitude of the free end with respect to tip mass ratio, non-dimensionalized rotating velocity, rotating angle and non- dimensionalized hub length. The rotating condition to minimize the vibration amplitude of the free end can be determined for the given basic paramenters.