• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.10-23
• /
• 1996

In this paper, the reverse link performance evaluation with synchronous CDMA is analyzed in the PCS system, which is the schem based on proposed method of KMT-PCS to increase the capacitance of cellular CDMA system. We make the baseband system model of CDMA reverse link, and then analyze system performance and subsystem techniques considering effect of channel and power control that are improtant factor influencing system performance in the PCS system. Based on this result, the paper presents primary technique analyses required at synchronous reverse link proposed by the KMT, which compose of initial synchronization range in initial synchronization step and control signal period in the synchronization maintenance step.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.56-61
• /
• 2003

This study was performed to examine the effects of chaff as a bulking material on temperature, pH, weight and volume reduction and salinity in aerobic composting of food wastes. Volume ratios of food wastes to chaff in reactor of Control, Ch-1. Ch-2, Ch-3 and Ch-4 were 4:0, 4:1, 4:2, 4:3 and 4:4. respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours aeration per day. The lowering of the volume ratio of food wasted to chaff resulted in the reaction at higher reaction temperature and the elongation of the high temperature reaction period. The lowering of the volume ratio of food wastes to chaff resulted in the more faster pH increase. The lowering of the volume ratio of food wastes to chaff resulted in the more faster reduction in the weight and the volume of wastes. Salinities were condensed by reaction days. The final salinity of Control and the final range of salinities of chaff mixtures were 2.79%, and 2.18~2.37%. respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.285-289
• /
• 1992

This paper describes a new optimization technique for the design of traffic signal patterns. The proposed method uses a Genetic Algorithm for searching through the better signal patterns. Since the Genetic Algorithm is effective to search directly through a huge binary coded state spaces, the proposed design method has the following advantages over the conventional OR methods: (1) on-line optimization is available within a reasonable time, (2) there is no limitation to the types of signals to be optimized. Some computer simulations are carried out and its ability of getting high quality control in a short period is demonstrated.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.271-281
• /
• 2000

A number of variables and environment are concerned for the basic design of train. The design of train ran be optimized by the ruining simulation. And using the simulation result the consuming energy, regenerating power, adhesion coefficient, train traction control capacity are respectable. Considering these variables and for more information operating time, operating period, standard velocity and limit speed, the all factors of train are optimized. The light-tail tram is mainly divided into linear motor train, road surface train, iron wheel train and rubber tire train, and the most profitable one for adhesion coefficient is rubber tire train and the train will be designed.

• Radiation Oncology Journal
• /
• v.2 no.2
• /
• pp.245-252
• /
• 1984

The record of radiation therapy cases during a five year period at the University of Michigan Hospitals has been analyzed. Of a total of 73 adenocarcinoma of prostate, the majority belonged to Stage B and C which represented 49 and 20 cases, respectively. The mortality rate after irradiation was clearly related to the tumor stage. Local irradiation resulted in $88\%$ of the local control of well·differentiated adenocarcinomas. Stage C cases had $50\%$ mortality, whereas that of Stage B patients was $14\%$. Results of this study are in general agreement with previous data in terms of the local disease control after irradiation and provide a basis for conservative radiotherapy regimen as an approach in the treatment of localized prostatic carcinomas.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.386-389
• /
• 2002

It may be necessary to apply a daily fever to operate the municipal solid waste landfill. The daily cover helps to control nuisance factors such as the escape of odors, dusts and airborne emissions, and can control the population of disease vectors. Also it may be reduce the infiltration of rain, decreasing the generation of leachate and the potential for surface water and groundwater contamination. Because of its usual availability and traditional usage as the municipal solid waste landfill, soil remains as the most common daily cover material. However, soil tends to reduce the volume of dumping waste c;3pacity in the landfill, it also reduces a period of using in the landfill. Therefore, it is necessary to research about Alternative Daily Cover Materials (ADCMs) because of the limitation of landfill sites. Recently, The types of ADCMs are classified into geosynthetics, forms, spray-ons, indigenous materials. In this study, the authors have tested the spray type of Alternative Daily Cover(ADC) using by flyash, alum with cement. The development. of ADCMs will be highly effective in terms of prolongation using landfill.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1312-1317
• /
• 1992

Autologous blood transfusion is a common method of reducing the need for homologous blood transfusion during cardiac operations. Between June 1991 and May 1992, 12 cases [Group I] were experienced autologous blood transfusion using Cell Saver undergoing double valve replacement or redo-valve replacement. Control group [N=12, Group II] was selected to above similar operation during same period. The Cell Saver system [Haemonetics Corp.] was employed for autologous blood transfusion. The blood shed in the operative field before and after cardiopulmonary bypass and remained cardiotomy reservior was aspirated by means of a locally heparinized collecting system. After centrifused salvaged blood, the resulting red cell concentrate reinfused subsequently. The patient receiving autologous blood transfusion required significantly less homologous blood transfusion than their control group. [Group I; 3519 $\pm$ 869, Group II; 4622 $\pm$ 856, Respectively; P=0.005] There were no clinical infections in the autotransfusion group. And there was no apparent intergroup difference of the clinical findings, hematologio datas and coagulation parameters. We conclude the autotransfusion using Cell Saver is effective for reducing of the hom-ologlous blood transfusion in cardiac surgery.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.2
• /
• pp.201-206
• /
• 2004

Counters for the various kinds of banknotes require high-speed distinctive point extraction and recognition. In this paper we propose a new point extraction and recognition algorithm for Euro banknotes. For distinctive point extraction we use a coordinate data extraction method from specific parts of a banknote representing the same color. To recognize banknotes, we trained 5 neural networks. One is used for inserting direction and the others are used for face value. The algorithm is designed to minimize recognition time by using a minimal amount of recognition data. The simulated results show a high recognition rate and a low training period. The proposed method can be applied to high speed banknote counting machines.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.544-549
• /
• 1990

In industrial multivariable plants, it is often the case that the plant outputs are detected not simultaneously but serially. In this paper, the problem of estimating the state vector of the plant based on the data obtained from such a detecting scheme is considered, and a special type of observer (referred to as a "serial-sampling' type observer) which renews its internal states whenever a new data is obtained is proposed. It is proved that such an observer can be constructed for almost every sampling period if the plant is observable as a continuous-time multivariable system, and that the poles of the closed-loop system using the serial-sampling type observer consist of the poles of the observer and those of the state feedback system. The behaviors of the observer and the closed-loop system are studied by simulation. The results of simulation indicate that a serial-sampling type observer can estimate the state of the plant more accurately than the ordinary type observers and improve the closed-loop performance.ance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.8
• /
• pp.769-776
• /
• 2007

This paper proposes the human arm motion tracking algorithm based on the signal processing for surface EMG (electromyogram) sensors attached on both upper arm and shoulder. The signals acquired by using surface EMG sensors are processed with choosing the maximum in a short period, taking the absolute value, and filtering noises out with a low-pass filter. The processed signals are directly used for the motion generation of virtual arm in real time simulator. The virtual arm of simulator has two degrees of freedom and complies with the flexion and extension motions of elbow and shoulder. Also, we show the validity of the suggested algorithms through the experiments.