• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.455-464
• /
• 2001

For future multimedia services, one of the most crucial issues is building an access network that can accommodate multimedia services in subscriber network. The VB5.2 interface of B-ISDN located between an access network and a service node allows dynamic allocation and release of ATM resources. The SG 13 of ITU-T is standardizing the B-BCC protocol, which is sequentially interworked with signaling protocols in the service node. To minimize a connection setup delay of the sequential interworking mode, we proposed the parallel interworking model in which the SN executes simultaneously the connection control protocol of VB5.2 interface and signaling protocol. We simulate two interworking models in terms of a connection setup delay and a completion ratio. The results of simulation show that our proposed parallel interworking model for the VB5.2 interface reduces the setup delay and has the similar completion ratio compared to the sequential interworking model. however, the connection setup delay of parallel interworking model becomes about seven tenths of that of the sequential interworking model and the improvement become larger as the arrival rate increased.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1344-1367
• /
• 2014

Mobile traffic is increasing a masse because of the propagation of the Internet and the development of wireless mobile technology. Accordingly, the Network Local Mobility Management (NETLMM) working group [1] of the Internet Engineering Task Force (IETF) has standardized Proxy Mobile IPv6 (PMIPv6) [2] as a protocol for accomplishing the transmissibility of mobile terminals. PMIPv6 is a network-led IP-based mobility management protocol, which can control terminal mobility without depending on the type of access system or the capability of the terminal. By combining PMIPv6 and the mobility of Session Initiation Protocol (SIP), we can establish terminal mobility and session mobility through a more effective route. The mobility function can be improved and the overlap of function reduced as compared to that in the case of independent operation. PMIPv6 is appropriate for a non-real-time service using TCP, and SIP is appropriate for a real-time service using RTP/UDP. Thus, in the case of a terminal using both services, an effective mobility management is possible only by using PMIPv6 together with SIP. In order to manage mobility in this manner, researches on PMIPv6-SIP are in progress. In line with this trend, this paper suggests a new PMIPv6-SIP architecture where when a mobile terminal conducts a handover, a network-led handover while maintaining the session without the addition of a special function or middleware is possible along with effective performance evaluation through mathematical modeling by comparing the delay and the packet loss that occur during the handover to the Pure-SIP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.295-307
• /
• 2002

The IEEE 1394 protocol is a de facto standard in multimedia digital home network. It supports several advanced features such as hot plugging, dynamic network reconfiguration, isochronous transmission and so on. Since the IEEE 1394 was adapted in the field of multimedia service with QoS guarantee, back bone network protocol with reel-time digital instrumentation and control sub networks, and physical layer protocol for real-time middleware such as real-time CORBA, the additional real-time features has been required in device driver implementation because of the necessity of the predictability enhancement. To guarantee the real-time features, the device driver of the IEEE 1394 should support the priority based packet processing and also need a isochronous buffer management mechanism to deal with the periodic isochronous communication. In this paper, we proposed a new software architecture of the IEEE 1394 device driver for supporting the real-time characteristics such as priority based packet processing, priority based scheduling and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1238-1244
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. In these networks the optical hardware in the RN is very simple, but a multiple access protocol is needed for upstream traffic control. On the other hand, the role of communications is already well established in the office environment. With the advent of cheap, affordable broadband communications and the increasing complexity of consumer electronics, it seems natural to extend the network into the home. As the application of Home Area Network is ever increasing, we therefore consider connectivity between access network and home network which generates various traffic to design MAC protocol over residential network. Global-FIFO is quite simple and allows dynamic upstream bandwidth assignment on the basis of a request-and-permit mechanism. It has good bandwidth efficiency and being cell-based, it does not consider the various traffic from home network. In this paper, we design and analyze the new MAC resource assignment algorithm called MQ-FIFO (Multiple Queue-FIFO) that provides good performance under the environment of ATM-PON and Home Network.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.97-107
• /
• 2013

Underwater wireless communication systems can be useful for underwater environment observation, catastrophe prevention, ocean resources exploration, ocean organism research, vessel sinking exploration, and so on. However, unlike terrestrial wireless communication, underwater wireless communication should consider factors such as long propagation delay, limited transmission capacity, high bit-error rate due to potential loss in power, ambient noise, man-made noise, multi-path, etc., because of the inherent characteristics of water. Thus, in this paper, we propose a suitable media access control(MAC) protocol that applies a combination of the ALOHA MAC protocol and the CSMA/CA MAC protocol to underwater environment. We further propose a mathematical analysis model to evaluate performance. We also verify performance improvement in the proposed scheme in comparison with existing MAC protocols.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.339-346
• /
• 1999

When a multicast video conference system utilizes RTP (Real Time Protocol) and RTCP (Real Time Control Protocol), the loss rate and the synchronization of transfer in RTCP affect the scalability of the system. The random delay technique introduced to resolve the problems is so simple that leads the network to meet some congestion in synchronizing feedback information when lots of people transfer the feedback information simultaneously, which reduces the scalability of system. In this paper, we propose a new feedback control algorithm that provides priority levels with the RTCP packet, which cuts down the feedback delay and increases the scalability. The criteria of providing priority Based on the decided priority level, Agent forced the session participants to provide much more RTCP packets, positively controlled, and the possible bandwidth can be measured. The simulation on this technique decreases the delay, and the feedback messages are equally distributed on a given time period.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1501-1506
• /
• 1999

DSRC(Dedicated Short Range Communications), which is a radio mobile communication protocol in ITS, is suited for traffic related information services. But in WAC(Wide-Area wireless communications), we could consider a conventional communication infrastructure in the case of supporting other applications besides ITS. Especially considering the current the trends to introduce wireless internet service into the mobile communication network, wireless internet service in ITS system is valuable. Although ITS LLC(Logical Link Control) protocols recommended by Europe and Japan are effective for traffic related services, it is not suitable for services related with geographical information, image or internet. That is because the data traffic characteristics is changed according to service types. Therefore we suggest a logical link control algorithm effective for traffic information related services as well as internet web service, and analyze its performance. As a result of numerical analysis and simulation, proposed algorithm shows larger performance improvements. For traffic information related services, the performance of DSRC LLC recommended by Europe and Japan is the same as that of proposed LLC protocol. However, for wireless internet web service, the performance of proposed protocol is much better than that of LLC protocol used in Europe and Japan.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4754-4773
• /
• 2018

In sensor medium access control (SMAC) protocol, sensor nodes can only access the channel in the scheduling and listening period. However, this fixed working method may generate data latency and high conflict. To solve those problems, scheduling duty in the original SMAC protocol is divided into multiple small scheduling duties (micro duty MD). By applying different micro-dispersed contention channel, sensor nodes can reduce the collision probability of the data and thereby save energy. Based on the given micro-duty, this paper presents an adaptive duty cycle (DC) and back-off algorithm, aiming at detecting the fixed duty cycle in SMAC protocol. According to the given buffer queue length, sensor nodes dynamically change the duty cycle. In the context of low duty cycle and low flow, fair binary exponential back-off (F-BEB) algorithm is applied to reduce data latency. In the context of high duty cycle and high flow, capture avoidance binary exponential back-off (CA-BEB) algorithm is used to further reduce the conflict probability for saving energy consumption. Based on the above two contexts, we propose an improved SMAC protocol, micro duty adaptive SMAC protocol (MDA-SMAC). Comparing the performance between MDA-SMAC protocol and SMAC protocol on the NS-2 simulation platform, the results show that, MDA-SMAC protocol performs better in terms of energy consumption, latency and effective throughput than SMAC protocol, especially in the condition of more crowded network traffic and more sensor nodes.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.106-115
• /
• 2013

LED lighting control system using unidirectional DMX512 (digital multiplex with 512 pieces of information)) protocol has been the most popular. Nowadays, the user's consumption has been upgrading to the more intelligent system but the upgrading process does not affect the existing infrastructure. There were many researches use the additional communication for the feedback communication way such as WiFi, Controller Area Network (CAN), Power Line Communication (PLC), etc but all researches had inherent disadvantages that created the independent feedback with the existing DMX512 system. Our paper represents the novel method that uses the remote device management (RDM) protocol to associate the additional feedback with existent DMX512 infrastructure in the one system. The data in DMX512 frame sending to the DMX512 client is split and repacked to become the RDM packet. This RDM packet is transferred to the RDM monitor console and the response RDM packet is converted to the DMX512 frame for control DMX512 client devices. This is the closed loop control model which uses the bidirectional convertibility between RDM packet and DMX512 frame. The proposed method not only upgrades the feedback control function for the old DMX512 system without changing the existent infrastructure, but also solves compatible problems between new RDM devices and old DMX512 devices and gives the low cost solution for extending DMX512 universe.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.693-696
• /
• 2002

In this paper, network management system(NMS) was developed using Ethernet network for several devices. Recently, due to the development of the information communication, network has been constructed several place. And management system using network has been studied due to the increment of necessity of remote control for industrial device. Agent board that necessity of NMS, was developed using general micro-controller, it operates like stand-alone network device, supports TCP/IP protocol suite, has the ability to connect to industrial device and communicates each other. Also manager base on MMI was developed, it operates with agent board and supports effective management. To prove this system UPS(uninterruptible power supply) is selected as the example of industrial device. Finally, experimental result verifies the communication between agent board and manager.