• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.1-6
• /
• 2008

The ubiquitous sensor network technique is widely applied to variety of information fields such as home automations, logistics, traffic controls, public administrations, health and environment monitoring and etc. It is particularly useful in the areas where energy consumption is minimal and where continuous monitoring of the surrounding environments, which generates streams of data, are required. In this study, we have designed and implemented a living environment automatic control system which collects the streams of temperature, humidity, light and noise data of a simulated house setting in real-time fashion, then controls the home environment based on the collected data according to the users favorites. In order to differentiate the proposed system from the currently existing similar system, we have demonstrated not only the feasibility of collecting data using sensor network in the controlled environment but also the ability to control the various household equipments through wireless communications.

• Journal of the Korean Data and Information Science Society
• /
• 제25권5호
• /
• pp.1127-1135
• /
• 2014

Genome-wide association studies (GWAS) are designed to discover genetic variants such as single nucleotide polymorphisms (SNPs) that are associated with human complex traits. Although there is an increasing interest in the application of GWAS methodologies to population-based cohorts, many published GWAS have adopted a case-control design, which raise an issue related to a sampling bias of both case and control samples. Because of unequal selection probabilities between cases and controls, the samples are not representative of the population that they are purported to represent. Therefore, non-random sampling in case-control study can potentially lead to inconsistent and biased estimates of SNP-trait associations. In this paper, we proposed inverse-probability of sampling weights based on disease prevalence to eliminate a case-control sampling bias in estimation and testing for association between SNPs and quantitative traits. We apply the proposed method to a data from the Korea Association Resource project and show that the standard estimators applied to the weighted data yield unbiased estimates.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2752-2763
• /
• 1999

On account of the text based mail system has it's limit to support multimedia applications, GUI based mail system platform was developed to control document flow and automatize information process. The existing mail systems's to transmit data must need additional functions to automate document flow control. The platform of document flow control is deeply related to EDMAS(Electronic document Management System), workflow, Electronic Banking, DMS(Document Management System) automation, so it needs an ability to control proper data and document correctly. To resolve this problems, we are need of browser and engine to design work flow and to control documents flow. In this paper, we develope a mail browser to design document flow by follow user's requirements. This system can generate executive script code for document flow, and we add the function of workflow and process management to automatize the document flow in this system, and then we implement this Data flow engine.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.160-162
• /
• 2008

This paper presents the practical pressure control of hydraulic oil-pump system using SR drive for industrial application. In order to get a high performance of pressure dynamics in actual application, a data based PID control scheme is proposed in this paper. The look-up table from pre-measured data produces an approximately proper current reference according to motor speed and oil-pressure. And, PID controller can compensate the pressure error. With the combination of two references, the proposed control scheme can get a fast dynamics and stable operation. Furthermore, the suitable current controller considering the nonlinear characteristics of SRM(Switched Reluctance Motor) and practical test method for data measuring are introduced. The proposed control scheme is verified by the experimental test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.441-444
• /
• 2003

Network uncertainties such as data loss and time delay can vary the stability property of networked control system. Therefore, these uncertainties must be considered first in designing networked control system. In this paper, we present a new stability analysis method of networked control system with data loss and time delay. The proposed method can determine maximum allowable time delay and minimum allowable transmission rate that preserves stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.

• 한국정보통신학회논문지
• /
• 제20권4호
• /
• pp.739-746
• /
• 2016

철도 안전사고 예방을 목표로 하는 실시간 철도 안전관제 시스템에서는 DDS (Data Distribution Service) 표준 기술 기반의 데이터 전송 방안을 적용함으로 기존 현장의 안전검지장치로부터 발생한 데이터를 통합 및 관리하고 있다. 본 논문에서는 수많은 현장 데이터 중 일반철도 현장에서 발생한 신호설비 데이터 규격 설계를 소개하고 있다. 신호설비 데이터의 DDS 전송을 위하여 기존 표준 규격인 KRS SG 0062를 모델링하고, DDS 데이터 전송 단위인 Topic 설계 및 데이터 변환 방안을 제시하고, 데이터 성격 별로 네트워크 제어 QoS 정책 설계를 제시하고 있다. 또한 실제 현장 데이터를 분석하여 설계된 규격이 현장에 적용 가능한지를 확인해 보았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1245-1248
• /
• 2004

This paper presents a new technique to analyze data on the coordinate x, y, z and apply these data to design the motion control to improve the efficiency of the engraving machine so that it can engrave accordingly in 3 dimensions. First, the tool path on the x-y plane is analyzed to be synchronized with the z-axis. The digital data is then sent to the motion control to guide the movement of the engrave point on the x-y plane. Tool path moves along the x-axis with zero degree and different values of the y-axis according to the coordinate of the digital data and the analysis along z-axis to determine the depth for engraving. The depth can be specified from the gray level with the 256 levels of resolution. The data obtained includes the distances on x-axis, y-axis, and z-axis, the acceleration of the engrave point's movement, and the speed of the engrave point's movement. These data is then transfered to the motion control to guide the movement of the engrave point along the z-axis associated with the x-y plane. The results indicate that engraving using this technique is fast and continuous. The specimen obtained looks perfect in 3D view.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.878-883
• /
• 2006

발전된 형태의 통신망 제공은 광대역 멀티미디어 서비스를 가능하게 하고 있다. 네트워크 기반 지능형 이동 로봇 서비스가 새로운 서비스 중의 하나이다. 이때 네트워크 로봇을 원격으로 제어하기 위해서는 실시간 신뢰성 있는 로봇제어 데이터 전송이 필요하다. 본 연구에서 UDP 프로토콜에 기반을 둔 로봇 제어 데이터의 효과적인 전송기법을 제안한다. 제안한 기법은 로봇 제어 데이터에 우선순위를 부여하고 기지국에서 로봇 제어 데이터를 중복으로 전송하는 것이다. NS-2 모의실험을 통하여 제안한 제어데이터 전송 프로토콜 방법은 전송지연시간이 적으며 패킷 손실율도 매우 적음을 보인다.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.145-152
• /
• 2000

DNC(Direct Numerical Control) 네트워크 시스템에 대한 프로그램을 효율적으로 하기 위해서 현재 많은 시스템들이 개발되어 지고있다. 그러나 이 시스템들은 원거리 상의 컴퓨터와 머시닝 센터간에 상호연결이 원만하지 않아 작업에 비효율적인 면이 있고, 또 머시닝 센터의 데이터 송$\cdot$수신에서 오류가 발생되면 시스템에서 운영자가 적절한 대처를 할 수가 없다는 문제점이 있다. 그래서, 본 논문에서는 DNC Network을 통해 NC Controller에서 컴퓨터의 데이터를 오류가 없이 수신이 가능한 데이터 원격제어 시스템을 새로이 구성하였다. 이 데이터 원격제어 시스템의 주요 장점으로는 머시닝 센터에서 운영자가 쉽게 컴퓨터에 저장된 NC데이터의 호출과 송출이 자유롭고, 컴퓨터와 공작기계간의 상호대화가 없어도 NC기계 상에서 원격제어(Remote Control)가 가능하다.

• Genomics & Informatics
• /
• 제7권3호
• /
• pp.148-151
• /
• 2009

Generally, larger sample size leads to a greater statistical power to detect a significant difference. We may increase the sample size for both case and control in order to obtain greater power. However, it is often the case that increasing sample size for case is not feasible for a variety of reasons. In order to look at change in power as the ratio of control to case varies (1:1 to 4:1), we conduct association tests with simulated data generated by PLINK. The simulated data consist of 50 disease SNPs and 300 non-disease SNPs and we compute powers for disease SNPs. Genetic Power Calculator was used for computing powers with varying the ratio of control to case (1:1, 2:1, 3:1, 4:1). In this study, we show that gains in statistical power resulting from increasing the ratio of control to case are substantial for the simulated data. Similar results might be expected for real data.