• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1849-1854
• /
• 2018

The present study aims to investigate the feasibility of using a simple nonlinear acoustic method for the assessment of bone status and osteoporosis in trabecular bone. Correlations of linear and nonlinear ultrasound parameters with the apparent bone density were obtained in 32 bovine femoral trabecular bone samples. Highly significant positive correlations were observed between the apparent bone density and the two linear ultrasound parameters, the speed of sound (SOS) and the normalized broadband ultrasound attenuation (nBUA), with Spearman's correlation coefficients of r = 0.85 and 0.77. In contrast, the apparent bone density was found to be negatively correlated with the nonlinear ultrasound parameter introduced in the present study, the logarithmic difference between the power spectrum levels of the fundamental frequency and the second harmonic (PSL1-PSL2), with the highest correlation coefficient of r = -0.92. These results suggest that the PSL1-PSL2, in addition to the SOS and the nBUA, may be useful for the assessment of bone status and osteoporosis.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.65-75
• /
• 2005

An accurate characterization of the display device is essential for better color matching. The calibration and characterization process in display device is needed to transform the device dependent color to the device independent color. The process of characterization performs a linearization and transforms the linearized values into the CIE XYZ tristimulus values. The purposes of this paper is to propose optimal color transformation method for accurate reproduction of original copy in display device and to explain the propriety of transformation method using specific variable for the power of gradation expression.

• Radiation Oncology Journal
• /
• 제18권4호
• /
• pp.345-354
• /
• 2000

목적 : 방사선조사야를 확인하는 보편적인 방법인 linacgram은 저대조도(low contrast)의 영상을 보여주고 있어 정확한 영상을 확인하는데 문제점이 있다. 따라서 본 연구는 linacgram의 대조도를 높이는 저가형 확인방법을 모색하여 영상판독과 조사야 확인에 도움이 되고자 한다. 대상 및 방법: 인체모형을 사용하여 얻어진 필름 영상을 필름전용 스캐너(Diagnostic Pro)를 통해 Optical Density Scan, Histogram Equalized, Linear Histogram Based (HB), Linear Histogram Independent, Linear Optical Density (OD) Logarithmic 및 Power, Square Root scan 방식으로 디지털화 하였다. 각기 다른 방식으로 전산 입력된 영상의 신호분포도를 얻어 signal intensity를 비교한 후 pailette fitting 방식을 통해 영상을 재구성하였고 재구성된 영상을 비교 분석하였다. 실제 치료에서 얻어진 각 인체 부위별 linacgram도 동일한 방법으로 처리한 후 화질 개선도를 알아 보았다. 결과 : 인체모형을 통해 얻어진 영상의 신호 분포영역은 Logarlthmic 방식을 선택했을 때 최소값인 3192가 나왔고 Square Root방식을 사용했을 때 최대값인 21940가 나왔다. 이러한 값들을 모니터 상에서 구현할 수 있는 256 gray scale로 바꾸어 보았을 때 7$\~$30$\%$ 만 사용되어지고 있음을 알수 있었다. Pallette fitting 방식을 통하여 모니터의 최대표현 값인 256 계조도로 Gray Scale Expansion (GSE) 함으로써 모니터가 지원하는 8bit gray scale pallette의 전범위를 사용하여 대조도가 개선되었다. 임상에서 얻어진 각 인체 부위별 무릎관절, 두경부, 폐, 골반영상에서도 GSE 처리하여 얻어진 영상이 해부학적 구조를 판독하는데 도움이 죄었다. 결론 : GSE 영상의 재구성은 대조도를 증가 시킬뿐 아니라 인체내 관심부위의 농도분포를 별도로 재구성할 수 있으므로 이중방사선조사(double exposure)에 의해 발생되는 화질의 저하를 보정함으로써 화질 개선을 가능하게 하였다. Linacgram 화질 개선은 simulation image 및 치료계획에서 발생한 DRR과 multi-layer 중첩영상 분석에 사용할 수 있으며 영상 비교 시 치료부위의 신속하고 정밀한 확인을 가능하게 하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.55-56
• /
• 1998

The 3-D Fast Gradient Echo (Turbo FLASH, Turbo Fast Low Angle Shot) sequence is optimized to achieve a good T1 contrast using variable excitation flip angles. In Turbo FLASH sequence, depending on the contrast preparation scheme, various types of image contrast can be established. While proton density contrast is obtained when using a short repetition time with a short echo time and small flip angles, T1 or T2 weighting can be obtained with proper contrast preparation sequences applied before the above proton density Turbo FLASH sequence. To maximize the contrast to noise ratio while retaining a sharp impulse response (smooth frequency domain response), the excitation flip-angle pattern is optimized through simulation and experiments. The TI (the delay after the preparation sequence which is a 180 degree inversion RF pulse in the IR T1 weighted imaging case), TD (the delay time between the Turbo FLASH sequence and the next preparation), and TR are also optimized fur the best image quality. The proposed 3-D Turbo FLASH provides $1mm\times1mm\times1.5mm$ high resolution images within a reasonable 5-8 minutes of imaging time. The proposed imaging sequence has been implemented in a Medison's Magnum 1.0T system and verified through simulations as well as human volunteer imaging. The experimental results show the utility of the proposed method.

• Journal of Photoscience
• /
• 제3권2호
• /
• pp.65-69
• /
• 1996

In this paper, it was studied about the red-sensitive layer. UV-Vis data of the dye at monomeric and J-state were considered with respect to their performance(contrast, density and fog) in photographic emulsion. The sensitizing effect of the dye is found to be strongly structuredependent. Naphthothiazolo carbocyanine dye can be used as red-sensitizing dye for the spectral sensitization of photographic emulsion.

• 한국의학물리학회지:의학물리
• /
• 제16권4호
• /
• pp.192-201
• /
• 2005

본 연구에서는 PET/CT 시스템에서 CT 영상을 이용한 감쇠 보정 시 조영제가 PET 영상에 미치는 영향을 관찰하기 위해 팬텀실험과 모의실험을 수행하였다. 다양한 농도로 희석한 조영제를 채운 플라스틱 병을 스티로폼을 이용하여 전신 팬텀 내에 고정시킨 후 투과 영상을 획득하였다 모의실험을 위해 인체 기관 중간을 가진 수학적 방출 맵과 투과 맵을 각각 생성하였다. 조영제의 비균일 증강, 조영제의 다양한 농도 및 분포 크기, 잡음 정도, 영상의 해상도, 재구성 알고리듬, 조영제의 저-감쇠, 그리고 각각 다른 시간상에 대한 조영제의 분포의 차이와 같은 다양한 인자들에 대하여 평가하였다. 팬텀실험으로부터 CT의 Hounsfield 값이 조영제의 농도 및 전압 값에 의존함을 확인할 수 있었다. 모의실험으로부터 조영제가 감쇠 보정한 PET 영상에서 인공산물을 생성하고 영상의 질을 떨어뜨리는 것을 관찰할 수 있었다. 조영제의 영향은 조영제의 농도 및 분포 크기, 잡음 정도, 영상의 해상도 등에 의해 영향을 받는 것으로 나타났다. 본 연구 결과들은 임상적 PET/CT 영상에서 조영제로 인해 발생할 수 있는 잠재적 문제를 충분히 이해하고 이를 고려해야 함을 보여 주었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권6호
• /
• pp.349-353
• /
• 2003

The physiological characteristics of cultures of very high cell mass (e.g. 10g cell mass/L), termed“ultrahigh cell density cultures”is reviewed. A close relationship was found between the length of the optical path (OP) in flat-plate reactors and the optimal cell density of the culture as well as its areal (g m$\^$-2/ day$\^$-1/) productivity. Cell-growth inhibition (GI) unfolds as culture density surpasses a certain threshold. If it is constantly relieved, a 1.0cm OP reactor could produce ca. 50% more than reactors with longer OP, e.g. 5 or 10cm. This unique effect, discovered by Hu et al. [3], is explained in terms of the relationships between the frequency of the light-dark cycle (L-D cycle), cells undergo in their travel between the light and dark volumes in the reactor, and the turnover time of the photosynthetic center (PC). In long OP reactors (5cm and above) the L-D cycle time may be orders of magnitude longer than the PC turnover time, resulting in a light regime in which the cells are exposed along the L-D cycle, to long, wasteful dark periods. In contrast, in reactors with an OP of ca. 1.0 cm, the L-D cycle frequency approaches the PC turnover time resulting in a significant reduction of the wasteful dark exposure time, thereby inducing a surge in photosynthetic efficiency. Presently, the major difficulty in mass cultivation of ultrahigh-density culture (UHDC) concerns cell growth inhibition in the culture, the exact nature of which is awaiting detailed investigation.

• The Plant Pathology Journal
• /
• 제17권5호
• /
• pp.295-299
• /
• 2001

The relative density of phytoplasmas in witches'broom (WB)-infected jujube trees was investigated using compatitive polymerase chain reaction (PCR). During dormant and defoliating seasons, the densities of phytoplasmas were about the same in roots and twigs. In early growing season, the density showed the highest rates in roots, then in twigs and in petioles. however, the density was highest in petioles and the lowest in roots during actively growing season. Throughout the year, root samples did not show any serious fluctuation compared with that of t2wigs and petioles. Density was lowest during actively growing season in root samples. In contrast, petiole sample densities varied to a great extent depending on the season, very high during actively growing season, but very low during the early growing season, In twig samples, the densities were very high and almost the same in both defoliating and dormant seasons. Among the parts of the trees, phytoplsma density was the most stable in root samples throughout the year. The highest densities of phytoplasmas were about the same in all tree parts. These results suggest that the phytoplasmas may overwinter not only in roots but also in twigs, and that multiplication rate of phytoplsma becomes very high right after the early growing season.

• 대한산업공학회지
• /
• 제23권3호
• /
• pp.533-544
• /
• 1997

Among numerous factors that have an effect on visual field, the effects of background condition on the size of the visual field were investigated to obtain more practical visual field that can be readily applicable to industrial settings. A visual experiment was conducted, in which the subject was instructed to search a target with distinct orientations. Size contrast, meridian, nontarget density, and subject's gender showed a significant effect on the size of the visual field at $\alpha=0.01$. The size of the visual field was linearly proportional to size contrast, and inversely proportional to density. Female's visual fields were found to be significantly larger than male subjects', The size of the visual field on horizontal axis was larger than that on vertical axis, and the size of the head & eye field on right meridian was also larger than that on left meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equations to predict the visual fields on the given background condition were suggested. The visual fields suggested in this study would be valuable to the design of visual displays and the panel layout of various displays and controls.

• 한국방사선학회논문지
• /
• 제9권5호
• /
• pp.301-306
• /
• 2015

엑스선을 이용하면 다양한 종류의 시료에 대한 투영 영상을 얻을 수 있다. 시료가 저밀도 및 고밀도의 복합 물질로 구성되어 있는 경우는 단일 관전압 엑스선을 이용해서 두 물질을 모두 대조도가 높도록 영상화하기 어렵다. 저관전압과 고관전압을 이용하여 영상을 획득하고 영상처리하면 밀도의 차이가 큰 물질을 영상화하기에 용이하다. 크기가 작은 전자부품을 저관전압과 고관전압에서 영상을 획득하여 visual C++을 이용하여 픽셀-픽셀 영상 합성을 통하여 전자부품의 합성수지부분과 금속부분을 동시에 영상화하여 전자부품의 검사 및 관찰의 가능성을 검증하였다.