• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.321-325
• /
• 2003

The technology for the multi-dimensional terrain perspective view can be used as an important factors in planning and designing for the various construction projects. In this study, the stereo image perspective view has been generated for the multi-dimension analysis by combining useful digital map and remotely sensed satellite images. In the course of experimenting with the multi-dimensional topography generated by the combination of the front-projected image by the precise GCP and DEM from the contour line, the technology has been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This stereo image bird's eye view has made it possible to make multi-dimensional analysis on the terrain, which provides real time virtual access to the designated construction sites and will be a versatile application for development planning and construction projects.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2002

The technology for the three-dimensional terrain perspective view can be used as an important factor in planning and designing for the various construction projects. In this study, the stereo image perspective view has been generated for the multi-dimension analysis by combining useful digital map and remotely sensed satellite images. In the course of experimenting with the three-dimensional topography generated by the combination of the orthopimage by the precise GCP and DEM from the contour line, the technology has been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This stereo image bird's eye view has made it possible to make multi-dimensional analysis on the terrain, which provides real-time virtual access to the designated construction sites and will be a versatile application for development planning and construction projects.

• Journal of the Speleological Society of Korea
• /
• no.68
• /
• pp.5-22
• /
• 2005

Since earlier in 1947 the writer had been devoting part of his time to study alluvial fans in Korea based on his own interest in geomorphology. However, it was in 1958 when a new geography department was set up and the Research Center of National Lands was established in the university of Kyung Hee, the writer started scientific investigation for alluvial fans. The Following alluvial fans have been studied by the writer: those of Mt. Kwanak and Mt. Chungge in 1947; those of Pulkuksa in 1948; those of Suhnamsa, Suh Myun, Pusan in 1950; those of Shindonae, Mt. Kerrong, in summer of 1958; those of Hwaomsa, Kure and Yongsan Myun, Changhung, in winter of 1958. The article is the comparative study of the above mentioned alluvial fans including Suhkwangsa Fan, Chugaryng Rift Valley. Of course this is not the study covering all af alluvial fans in Korea. Within the limits of his surbey, the writer has com to a conclusion which may be helpful for the Korean alluvial fm study. 1. Korean alluvial fans are generally found in rift valleys or basins. 2. They are formed in places of below 220-meter contour line. 3. The slope from fna apex to river valley is 20-40 degree. The slope of fan surface is 5-20 degree, but most of them under 16 degree. A sudden change of slope is taken place or the fan apex and fan center. 4. Hills (100-200m) are developed on the surfaces of alluvial fans. 5. Most of rivers in alluvial fans are geyser rivers. 6. The depth of well : from ground surface to the well water surface is 4-8 m; water depth is 1-2m. 7. Land utilization; cultivated land 30%: non cultivatedland 70%. The area occupied by upland fields is twice of paddy field area. 8. Settlement : agglomerated settlement is developed on the top or the end of fan and surrounded by windbreakers. 9. Farming pattern at the top of fan fields are rectangular and parallel to flumes but at the center of fan, they are irregular and perpendicular to flumes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2187-2193
• /
• 2002

We present a novel method for 3D microfabrication with LIGA process that utilizes a deep X-ray mask in which a micro-actuator is integrated. The integrated micro-actuator oscillates the X-ray absorber, which is formed on the shuttle mass of the micro-actuator, during X-ray exposures to modify the absorbed dose profile in X-ray resist, typically PMMA. 3D PMMA microstructures according to the modulated dose contour are revealed after GG development. An X-ray mask with integrated comb drive actuator is fabricated using deep reactive ion etching, absorber electroplating, and bulk micromachining with silicon-on-insulator (SOI) wafer. 1mm $\times$ 1 mm, 20 $\mu$m thick silicon shuttle mass as a mask blank is supported by four 1 mm long suspension beams and is driven by the comb electrodes. A 10 $\mu$m thick, 50 $\mu$m line and spaced gold absorber pattern is electroplated on the shuttle mass before the release step. The fundamental frequency and amplitude are around 3.6 kHz and 20 $\mu$m, respectively, for a do bias of 100 V and an ac bias of 20 $V_{p-p}$ (peak-peak). Fabricated PMMA microstructure shows 15.4 $\mu$m deep, S-shaped cross section in the case of 1.6 kJ $cm^{-3}$ surface dose and GG development at 35$^{\circ}C$ for 40 minutes.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.32-38
• /
• 2019

The flying wing configuration with high sweep angles and rounded leading edge represent a complex flow of structures by the leading edge vortex. For control of the tailless flying wing configuration with unstable directional stability, flaperon is used. In this study, we conducted numerical simulations for a non-slender flying wing configuration with a rounded leading edge and analyzed the effect of the sideslip angle and flaperon. Through aerodynamic coefficient analysis, it was found that the effect of AoS on lift and drag coefficient was minimal and the side force and moment coefficient were markedly influenced by AoS. As the sideslip angle increased, the pitch break, which is related to the pitching moment coefficient, was delayed. Through stability analysis, the directional and lateral static stability of the flying wing configuration were increased by flaperon. Also, the structure and behavior of the leading edge vortex were analyzed by observing the contour of the pressure coefficient and the skin friction line.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.129-137
• /
• 2019

Ubiquitous computing technology is emerging as information technology advances. In line with this, a number of studies are being carried out to increase device miniaturization and user convenience. Some of the proposed devices are user-friendly and uncomfortable with hand-held operation. To address these inconveniences, this paper proposed a virtual button that could be used in watching television. When watching a video on television, a camera is installed at the top of the TV, using the fact that the user watches the video from the front, so that the camera takes a picture of the top of the head. Extract the background and hand area separately from the filmed image, extract the outline to the extracted hand area, and detect the tip point of the finger. Detection of the end point of the finger produces a virtual button interface at the top of the image being filmed in front, and the button activates when the end point of the detected finger becomes a pointer and is located inside the button.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.229-233
• /
• 2006

We investigated the magnetic properties of Fe nanostripes by using the all electron full-potenial linearized augmented plane-wave (FLAPW) energy band method within the generalized gradient approximation (GGA). The magnetic moments of the Fe atoms in the edge Fe chains of the stripes composed of three, five, and seven chains have saturated values of 2.97 or 2.98 ${\mu}_B$, and the values of the center chains are 2.82 ${\mu}_B$ which is similar to that of 2D square lattice. The charge and spin density contour plots showed that the flat distribution in the edge region of the stripes, and it is due to the spilled out p-electrons from the atoms in the edge line. The calculated density of states for the edge atoms in the stripes with seven Fe chains showed that the narrowed width compared to that of center atoms due to the band narrowing effect at the edge.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.251-258
• /
• 2021

Dental trauma is very common in children and relatively young people, with the line of treatment depending on the time elapsed, age of the child, and tooth maturity. If the fractured segment is available and there is close approximation of the segment to the remaining tooth, reattachment of the fractured segment is a feasible option. This treatment offers several advantages, including the reestablishment of function, aesthetics, shape, shine and surface texture, in addition to the original contour and alignment of the teeth. The following cases present two different complex crown fracture cases that were treated using tooth fragment reattachment with fiber-reinforced composite post.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.27-36
• /
• 2022

In this paper, to improve the conditions of the fish processing site, we propose a method to predict the cutting point of fish according to the target weight using AI machine vision. The proposed method performs image-based preprocessing by first photographing the top and front views of the input fish. Then, RANSAC(RANdom SAmple Consensus) is used to extract the fish contour line, and then 3D external information of the fish is obtained using 3D modeling. Next, machine learning is performed on the extracted three-dimensional feature information and measured weight information to generate a neural network model. Subsequently, the fish is cut at the cutting point predicted by the proposed technique, and then the weight of the cut piece is measured. We compared the measured weight with the target weight and evaluated the performance using evaluation methods such as MAE(Mean Absolute Error) and MRE(Mean Relative Error). The obtained results indicate that an average error rate of less than 3% was achieved in comparison to the target weight. The proposed technique is expected to contribute greatly to the development of the fishery industry in the future by being linked to the automation system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.