• CELLMED
• /
• v.5 no.3
• /
• pp.19.1-19.2
• /
• 2015

This is a case report involving a novel setting of sonographic scan for thickness of superficial abdominal fat and a non-invasive approach for reduction of the fat thickness. A 38-year-old woman complained of her abdominal contour asymmetry after the laser-assisted liposuction performed two years ago. Compression-free sonographic scanning confirmed that her superficial abdominal fat was thicker in left side than that of right side. After 9 sessions of 40KHz therapeutic ultrasound, the contour asymmetry was reduced.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.475-480
• /
• 2009

Purpose: To correct the facial asymmetry and to achieve symmetry and balance, not only the soft tissue restoration of deficits but also creation and facial contour line such as mandible border and angle is important. Micro fat graft has limitation such as high resorption rate and somewhat limited ability to emphasize the rigid bony characteristics of the mandible angle due to its innate soft consistency. We have investigated the advantages of dermal fat graft over micro fat graft to correct asymmetry of the lower face in patients who had undergone mandibular reconstruction or distraction, using comparative analysis. Methods: Total of 12 patients were enrolled in our study: 6 micro fat graft and 6 dermal fat graft. Postoperative results were compared and analyzed at immediate postoperative period and more than 1 year later in each group with photographs, and analysised with image J program. Result: No complications were noted both in the micro fat type and the dermal fat type of procedures such as fat necrosis or micro calcifications. All of the patients who received micro fat graft, however had considerable amount of fat resorption after the procedure which led to two additional fat graft procedures. Although minor contour obliteration due to contracture was seen in patients who had undergone dermal fat graft procedure, no definite resorption was found even after more than one year follow-up. Results of dermal fat graft patients were satisfactory in terms of mandible angle symmetry. Secondary revision was necessary in one case due to overcorrection using dermal fat graft. Conclusion: The dermal fat graft has many advantages over the conventionally more popular micro fat graft to correct asymmetry of the lower face following mandible reconstruction owing to its lower resoption rate, more effective in emphasizing the natural curvilinear anatomical contours of the mandible angle and body and lower complication rates such as fat necrosis or micro calcifications.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.161-165
• /
• 2011

Purpose: Zygomaticomaxillary complex (ZMC) fracture is one of the most common facial injuries after facial trauma. As ZMC composes major facial buttress, it is a key element of the facial contour. So, when we treat these fractures, the operator should have a concern with the symmetry to restore normal appearance and function. But sometimes, unfavorable results may occur. The aim of this study is to analyze the unsatisfied midfacial contour after ZMC fractures reduction retrospectively and to point out the notandum. Methods: 369 patients, treated for fractures of the ZMC were included in the study. After the operation, such as open reduction and internal fixation (ORIF with titanium or absorbable materials), open reduction, and closed reduction, midfacial contour was evaluated with plain films and 3-dimensional computed tomography. And unfavorable asymmetric midfacial contours were correcterd by secondary correction and re-evaluated. Gross photographs were obtained at outpatient clinic. Results: Total of 38 patients had got a facial asymmetry and among of them 24 patients were treated secondary revisional ORIF operations for correction of unfavorable result of after primary reduction. Two of them had received tertiary operations, three patients had got osteotomy more than after one year and six patients had got minor procedures. The etiology of asymmetry were lateral displaced simple fracture of arch (n=2), lateral displaced comminuted fracture of arch (n=6), comminuted arch fracture combined posterior root fracture (n=9), and communited arch and body fracture (n=12), severely contused soft tissue (n=9). After the manipulations outcomes were acceptable. Conclusion: To prevent the asymmetry in ZMC fracture reduction, complete analysis of fracture, choice of appropriate operation technique, consider soft tissue, and secure of zygoma position are important. Especially, we should be more careful about communited fracture of zygomatic body and lateral displacement, root fracture of zygomatic arch. Because they are commom causes that make facial asymmetry. To get optimal result, ensure the definite bony reduction.

• Archives of Craniofacial Surgery
• /
• v.17 no.2
• /
• pp.77-81
• /
• 2016

Background: Asymmetry of the infraorbital rim can be caused by trauma, congenital or acquired disease, or insufficient reduction during a previous operation. Such asymmetry needs to be corrected because the shape of the infraorbital rim or midfacial skeleton defines the overall midfacial contour. Methods: The study included 5 cases of retruded infraorbital rim. All of the patient underwent restoration of the deficient volume using polyethylene implants between June 2005 and June 2011. The infraorbital rim was accessed through a subciliary approach, and the implants were placed in subperiosteal space. Surgical outcomes were evaluated using preoperative and postoperative computed tomography studies. Results: Implant based augmentation was associated with a mean projection of 4.6 mm enhancement. No postoperative complications were noted during the 30-month follow-up period. Conclusion: Because of the safeness, short recovery time, effectiveness, reliability, and potential application to a wide range of facial disproportion problems, this surgical technique can be applied to midfacial retrusion from a variety of etiologies, such as fracture involving infraorbital rim, congenital midfacial hypoplasia, lid malposition after blepharoplasty, and skeletal changes due to aging.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.4.1-4.6
• /
• 2016

Background: Most cases of facial asymmetry involve yaw deformity, and determination of the yaw correction level is very difficult. Methods: We use three-dimensional soft tissue simulation to determine the yaw correction level. This three-dimensional simulation is based on the addition of cephalometric prediction to gradual yaw correction. Optimal yaw correction is determined visually, and an intermediate splint is fabricated with computer-aided design and computer-aided manufacturing. Application of positioning devices and the performance of horseshoe osteotomy are advisable. Results: With this procedure, accurate repositioning of jaws was confirmed and patients obtained fairly good facial contour. Conclusions: This procedure is a promising method for a widespread, predictable treatment of facial asymmetry.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.103-110
• /
• 2014

Objectives: In this study, we assessed soft tissue asymmetry that occurred after open reduction of unilateral zygomaticomaxillary complex (ZMC) fractures. We proposed a simple method to assess soft tissue asymmetry after reduction surgery by evaluating the symmetry between the affected and the unaffected sides. The factors affecting soft tissue contour after surgery were also analyzed. Materials and Methods: Subjects included patients admitted to Wonkwang University Dental Hospital from 2008 to 2013. Cone-beam computed tomography (CBCT) images of asymmetric patients who underwent open reduction at least 3 months prior were compared with healthy patients. Results: The degree of asymmetry was measured in both the open reduction and control groups. Landmarks that showed a statistically significant difference between the two groups were zygion ($1.73{\pm}0.24mm$), bucclae ($1.08{\pm}0.26mm$), point of cheek ($2.05{\pm}0.33mm$) and frontozygomatic point ($1.30{\pm}0.31mm$). Conclusion: When compared with the normal group, asymmetry can occur in the affected side, which usually shows depression of overlying soft tissue and is statistically significantly different. Evaluation of soft tissue asymmetry with CBCT images after open reduction of ZMC fracture is useful.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.132-140
• /
• 2010

Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.423-429
• /
• 2015

Objective : The purpose of this study was to investigate the effects of a body alignment correction program on asymmetrically developed squash players. Method : 30 experienced squash players who showed asymmetric body development, after evaluation of moire topography contour line shape, were involved in the experiment. All of them were right-handed and had more than five years of experience playing squash. Variables of body composition, moire topography and EMG were statistically compared between pre- and post- application of the 12-week body alignment correction program. The program consisted of 10-minute, left-handed forehand and backhand drive movements and 36 minutes performing 12 different yoga postures. Results : First, the body alignment correction program showed significant effects on the total weight, body fat percentage, and body mass index of the participants. Second, a decrease of right side inclined angles and an increase of left side inclined angles might result in a higher left-right symmetry rate and a better left-right balance; however the data was not statistically significant. Third, the EMG left-right deviation of erector spinae and latissimus decreased and the erector spinae muscle was thought to be more essential for vertebral movement and left-right asymmetry correction. Conclusion : A body alignment correction program, including yoga and opposite side exercises, could reduce left-right asymmetry.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.148-153
• /
• 2021

Background: The zygomaticomaxillary complex (ZMC) has a protruded, convex shape and plays a vital role in determining the contour by affecting the width of the middle face. This study aimed to evaluate the efficiency of ZMC fracture reduction and explore detailed directions for outcome improvement. Methods: We conducted a retrospective study of patients diagnosed with unilateral ZMC fracture who underwent ZMC reduction surgery at a single hospital between January 2015 and May 2020. The primary outcome variable was facial asymmetry using the difference in the bilateral malar eminence (ME) position measured by computed tomography scan. The 3-dimensional distance (I_A, asymmetry index) and the distance in each dimension, D_x (anteroposterior distance), D_y (mediolateral distance), and D_z (superoinferior distance) were compared. Results: A total of 101 patients with ZMC fractures and 54 non-fracture patients were enrolled in the study. The mean age of the study sample was 43.49 years (control sample, 43.35 years), and the male-to-female ratio was 66.3:33.7 (control sample, 64.8:35.2). There were 53 and 48 patients with right and left ZMC fractures, respectively. The I_A was not statistically different between the two groups. In terms of position in each dimension, only D_x was significantly different between the two groups. Conclusion: The results show that overall facial asymmetry was recovered after ZMC reduction, but in certain dimension significant difference in ME position has still remained. For further improvement, treatment should be performed to relieve malar depression in the anteroposterior dimension.

• Korean Journal of Oriental Medicine
• /
• v.1 no.1
• /
• pp.273-287
• /
• 1995

Moire topography, a simple technique for three-dimensional quantitation, was used to provide interference fringe photographs of the human back with sufficient accuracy to be used for detecting patient with asymmetry due to scoliosis, the disease of cervix and lumbar, muscle dysfunction. Contour lines are a suitable and widely accepted method of describing a three-dimensional surface. In the moire technique, contour lines of an object are produced as interference fringes while the object is illuminated by a spotlight through a special grating. The fringe pattern is produced by the interference of the grating and its shadow on the object. A photograph of a moire pattern on the human back will permit an assessment of the overall body shape and the symmetry of the back. This study uses shadow moire topography. Moire topography provides a non-invasive technique for quantifying the shape of the human body. In the use of moire topography for the Oriental Medicine Diagnosis, the strength of moire lies in the ablility to detect change due to deformity of human body.