• Structural Engineering and Mechanics
• /
• 제73권1호
• /
• pp.37-52
• /
• 2020

This paper investigates the free and forced longitudinal vibration of a double nanorod system using doublet mechanics theory. The doublet mechanics theory is a multiscale theory spanning between lattice dynamics and continuum mechanics. Equations of motion and boundary conditions for the double nanorod system are obtained using Hamilton's principle. Clamped-clamped and clamped-free boundary conditions are considered. Frequencies and dynamic displacements are determined to demonstrate the effects of length scale parameter of considered material and geometry of the nanorods. It is shown that frequencies obtained by the doublet mechanics theory are bounded from above (van Hove singularity) and unlike classical elasticity theory doublet mechanics theory predicts finite number of modes depending on the length of the nanotube. The present doublet mechanics results have been compared to molecular dynamics, experimental and nonlocal theory results and good agreement is observed between the present and other mentioned results. The difference between wave frequencies of graphite is less than 10% between doublet mechanics and experimental results near to the end of the first Brillouin zone.

• 영어어문교육
• /
• 제5호
• /
• pp.63-78
• /
• 1999

In this paper, I explain why local obviation (Condition B of Chomskys binding theory) should be viewed as a relative phenomenon, and establish a correlation between Local Obviation (henceforth LO) effects and the Referential Hierarchy of Korean anaphors proposed in Lee (1997): ku (he) > caki (self) > casin (self) > cakicasin (selfself) = selo (each other). I show that LO characterized as a relative phenomenon may enable us to view Conditions B and C of the binding theory simply as an instantiation of varying degrees of (long distance) disjoint reference effects on the same continuum.

• 감성과학
• /
• 제9권4호
• /
• pp.367-375
• /
• 2006

본 연구는 인지 연속선 이론(Cognitive Continuum Theory)을 대학 교육 환경에 적용하여 학생들이 대학 내에서 개설된 각 과목을 수강할 때, 그에 요구되는 인지 모드를 사용하는가를 알아보고자 하는 것이었다. 또한 대학 교육이 전반적으로 요구하는 인지 모드와 학생들의 전반적인 인지 모드를 비교해 보았다. 실험 결과, 학생들은 실제 자신들의 평상시 인지 양식과 관계없이 각 과목에서 요구하는 인지 모드를 수업 중에 사용하는 것으로 나타났다. 이는 학생들이 상황에 맞는 적응력을 가지고 있다고 볼 수 있겠다. 한편, 대학에서 전반적으로 학생들에게 분석적인 인지 모드를 사용하도록 유도하는 것으로 나타났다 대학 교육이 학생들의 적응력과 융통성을 증진시키기 위해서는 교육을 담당한 교수진들이 다양한 인지 모드를 사용하는 것이 필요할 것이다. 하지만 학생들이 각 과목에서 요구되는 인지 모드를 사용하였을 때 높은 수행력을 보일 것이라는 예측은 이 실험을 통해 증명할 수 없었다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.105-115
• /
• 2000

방사성 폐기물지하처분이나 열수 및 축열 에너지저장, 지열에너지 개발 등과 같은 대규모 지하공간 프로젝트들이 대두됨에 따라 역학, 수리 및 열적 거동을 동시에 고려한 연구가 필요하게 되었다. 열-수리-역학 상호작용 해석은 열로 교란되고 지하수로 포화된 암반내의 거동을 열 수리, 역학 3가지 지배방정식의 결합을 통해 구현하는 상당히 복잡한 수치 해석 기법 중의 하나이다. 본 연구에서는 기존의 Biot의 압밀이론에 기초한 수식화들을 이용하여 연속체 암반의 열-수리-역학적 상호작용을 모사할 수 있는 유한요소 프로그램을 개발하였다. 개발된 프로그램의 검증을 위해 등온과 비등온 조건하의 일차원 압밀모델에 대한 해석을 실시하여 해석해와 비교하였다. 이타원 압밀에 대한 변수해석을 통하여 포아송비나 수리적 이방성과 같은 인자들이 매체 거동에 미치는 영향을 조사하였다. 앞으로 본 프로그램에 개별체 절리 모델을 통합시켜 보다 일반적인 불연속 암반의 상호작용 거동 해석에 이용할 수 있을 것이다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.355-365
• /
• 2000

방사성 폐기물지하처분이나 열수 및 축열 에너지저장, 지열에너지 개발 둥과 같은 대규모 지하공간 프로젝트들이 대두됨에 따라 역학, 수리 및 열적 거동을 동시에 고려한 연구가 필요하게 되었다. 열-수리-역학 상호작용 해석은 열로 교란되고 지하수로 포화된 암반내의 거동을 열, 수리, 역학 3 가지 지배방정식의 결합을 통해 구현하는 상당히 복잡한 수치 해석 기법 중의 하나이다. 본 연구에서는 기존의 Biot의 압밀이론에 기초한 수식화들을 이용하여 연속체 암반의 열-수리-역학적 상호작용을 모사할 수 있는 유한요소 프로그램을 개발하였다. 개발된 프로그램의 검증을 위해 등온과 비등온 조건하의 일차원 압밀모델에 대한 해석을 실시하여 해석해와 비교하였다. 이차원 압밀에 대한 변수해석을 통하여 포아송비나 수리적 이방성과 같은 인자들이 매체 거동에 미치는 영향을 조사하였다. 앞으로 본 프로그램에 개별체 절리 모델을 통합시켜 보다 일반적인 불연속 암반의 상호작용 거동 해석에 이용할 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제68권2호
• /
• pp.171-182
• /
• 2018

For the first time, nonlocal damped vibration and buckling analyses of arbitrary tapered bidirectional functionally graded solid circular nano-plate (BDFGSCNP) are presented by employing modified spectral Ritz method. The energy method based on Love-Kirchhoff plate theory assumptions is applied to derive neutral equilibrium equation. The Eringen's nonlocal continuum theory is taken into account to capture small-scale effects. The characteristic equations and corresponding first mode shapes are calculated by using a novel modified basis in spectral Ritz method. The modified basis is in terms of orthogonal shifted Chebyshev polynomials of the first kind to avoid employing adhesive functions in the spectral Ritz method. The fast convergence and compatibility with various conditions are advantages of the modified spectral Ritz method. A more accurate multivariable function is used to model two-directional variations of elasticity modulus and mass density. The effects of nanoscale, in-plane pre-load, distributed dashpot, arbitrary tapering, pinned and clamped boundary conditions on natural frequencies and buckling loads are investigated. Observing an excellent agreement between results of current work and outcomes of previously published works in literature, indicates the results' accuracy in current work.

• Computers and Concrete
• /
• 제6권4호
• /
• pp.319-341
• /
• 2009

A new formulation based on lumped plasticity and inelastic hinges is presented in this paper for nonlinear analysis of Reinforced Concrete (RC) frame structures. Inelastic hinge behaviour is described using the principles of Continuum Damage Mechanics (CDM). Member formulation contains provisions to model stiffness degradation due to cracking of concrete and yielding of reinforcing steel. Depending on its nature, cracking is classified as concentrated or distributed. Concentrated cracking is accounted through a damage variable and its growth is defined based on strain energy principles. Presence of distributed flexural cracks in a member is taken care of by modelling it as non-prismatic. Plasticity theory supported by effective stress concept of CDM is applied to describe the post-yield response. Nonlinear quasi-static analysis is carried out on a RC column and a wide two-storey RC frame to verify the formulation. The column is subjected to constant axial load and monotonic lateral load while the frame is subjected to only lateral load. Computed results are compared with those due to experiments or other numerical methods to validate the performance of the formulation and also to highlight the contribution of distributed cracking on global response.

• Coupled systems mechanics
• /
• 제11권2호
• /
• pp.151-166
• /
• 2022

Peltier cells have low efficiency, but they are becoming attractive alternatives for affordable and environmentally clean cooling. In this line, the current article develops closed-form and semianalytical solutions to improve the temperature distribution of Bi₂Te₃ thermoelements. From the distribution, the main objective of the current work-the optimal electric intensity to maximize cooling-is inferred. The general one-dimensional differential coupled equation is integrated for linear and quadratic geometry of thermoelements, under temperature constant properties. For a general shape, a piece-wise solution based on heat flux continuity among virtual layers gives accurate analytical solutions. For variable properties, another piece-wise solution is developed but solved iteratively. Taking advantage of the formulae, the optimal intensity is directly derived with a minimal computational cost; its value will be of utility for more advanced designs. Finally, a parametric study including straight, two linear, barrel, hourglass and vase geometries is presented, drawing conclusions on how the shape of the thermoelement affects the coupled phenomena. A specially developed coupled and non-linear finite element research code is run taking into account all the materials of the cell and using symmetries and repetitions. These accurate results are used to validate the analytical ones.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.1-22
• /
• 2022

In this paper, the nonlocal integral Timoshenko beam model is employed to study the free vibration characteristics of singled walled carbon nanotubes (SWCNTs) including the thermal effect. Based on the nonlocal continuum theory, the governing equations of motion are formulated by considering thermal effect. The influences of small scale parameter, the chirality of SWCNTs, the vibrational mode number, the aspect ratio of SWCNTs and temperature changes on the thermal vibration properties of single-walled nanotubes are examined and discussed. Results indicate significant dependence of natural frequencies on the nonlocal parameter, the temperature change, the aspect ratio and the chirality of SWCNTs. This work should be useful reference for the application and the design of nanoelectronics and nanoelectromechanical devices that make use of the thermal vibration properties of SWCNTs.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1985-1992
• /
• 2011

The stable conformers of glycine and the inter-conversions between them were studied theoretically at various levels of theory, B3LYP, MP2, CCSD and CCSD(T), in the gas phase and in aqueous solution. In aqueous solution, the structures examined by use of the conductor-like polarizable continuum model (CPCM) with various cavity models, UA0, UAHF, UAKS, UFF, BONDI and PAULING, and by use of a discrete/continuum solvation model with eight water clusters. The Gibbs free energy differences between the neutral (NE) and zwitterionic conformers (ZW), ${\Delta}G_{Z-N}[=G_{ZW}-G_{NE}]$, in aqueous solution were well reproduced by using the BONDI and PAULING cavity models. However the ${\Delta}G_{Z-N}$ values were underestimated in other cavity models, although the ZW conformers existed as stable species in aqueous solution. In the studies of a discrete/continuum solvation model with eight water clusters, gas phase results are still insufficient to reproduce the experimental findings. However the ${\Delta}G_{Z-N}$ values calculated by use of CPCM method in aqueous solution agreed well with the experimental ones.